Add support in the IO driver to control the S.Bus / RSSI port.

src/drivers/drv_rc_input.h

@@ -1,6 +1,6 @@
 /****************************************************************************
  *
- *   Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2012-2014 PX4 Development Team. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -135,8 +135,12 @@ ORB_DECLARE(input_rc);
 #define _RC_INPUT_BASE		0x2b00
 
 /** Fetch R/C input values into (rc_input_values *)arg */
-
 #define RC_INPUT_GET			_IOC(_RC_INPUT_BASE, 0)
 
+/** Enable RSSI input via ADC */
+#define RC_INPUT_ENABLE_RSSI_ANALOG	_IOC(_RC_INPUT_BASE, 1)
+
+/** Enable RSSI input via PWM signal */
+#define RC_INPUT_ENABLE_RSSI_PWM	_IOC(_RC_INPUT_BASE, 2)
 
 #endif /* _DRV_RC_INPUT_H */

src/drivers/drv_sbus.h

@@ -0,0 +1,58 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2014 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file drv_sbus.h
+ *
+ * Futaba S.BUS / S.BUS 2 compatible interface.
+ */
+
+#ifndef _DRV_SBUS_H
+#define _DRV_SBUS_H
+
+#include <stdint.h>
+#include <sys/ioctl.h>
+
+#include "drv_orb_dev.h"
+
+/**
+ * Path for the default S.BUS device
+ */
+#define SBUS_DEVICE_PATH	"/dev/sbus"
+
+#define _SBUS_BASE		0x2c00
+
+/** Enable S.BUS version 1 / 2 output (0 to disable) */
+#define SBUS_SET_PROTO_VERSION		_IOC(_SBUS_BASE, 0)
+
+#endif /* _DRV_SBUS_H */

src/drivers/px4io/px4io.cpp

@@ -61,6 +61,7 @@
 #include <drivers/device/device.h>
 #include <drivers/drv_rc_input.h>
 #include <drivers/drv_pwm_output.h>
+#include <drivers/drv_sbus.h>
 #include <drivers/drv_gpio.h>
 #include <drivers/drv_hrt.h>
 #include <drivers/drv_mixer.h>
@@ -1824,9 +1825,11 @@ PX4IO::print_status()
 	uint16_t raw_inputs = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_COUNT);
 	printf("%d raw R/C inputs", raw_inputs);
 	flags = io_reg_get(PX4IO_PAGE_RAW_RC_INPUT, PX4IO_P_RAW_RC_FLAGS);
-	printf("status 0x%04x%s", flags,
+	printf("status 0x%04x%s%s%s%s", flags,
 		(((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (!(flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11))) ? " DSM10" : ""),
-		(((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11)) ? " DSM11" : "")
+		(((io_status_flags & PX4IO_P_STATUS_FLAGS_RC_DSM) && (flags & PX4IO_P_RAW_RC_FLAGS_RC_DSM11)) ? " DSM11" : ""),
+		((flags & PX4IO_P_RAW_RC_FLAGS_FRAME_DROP) ? " FRAME_DROP" : ""),
+		((flags & PX4IO_P_RAW_RC_FLAGS_FAILSAFE) ? " FAILSAFE" : "")
 	       );
 
 	for (unsigned i = 0; i < raw_inputs; i++)
@@ -1861,7 +1864,13 @@ PX4IO::print_status()
 	printf("\n");
 
 	/* setup and state */
-	printf("features 0x%04x\n", io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES));
+	uint16_t features = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES);
+	printf("features 0x%04x%s%s\n", features,
+		((features & PX4IO_P_SETUP_FEATURES_SBUS1_OUT) ? " S.BUS1_OUT" : ""),
+		((features & PX4IO_P_SETUP_FEATURES_SBUS2_OUT) ? " S.BUS2_OUT" : ""),
+		((features & PX4IO_P_SETUP_FEATURES_PWM_RSSI) ? " RSSI_PWM" : ""),
+		((features & PX4IO_P_SETUP_FEATURES_ADC_RSSI) ? " RSSI_ADC" : "")
+		);
 	uint16_t arming = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING);
 	printf("arming 0x%04x%s%s%s%s%s%s\n",
 	       arming,
@@ -2283,6 +2292,38 @@ PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg)
 
 		break;
 
+	case RC_INPUT_ENABLE_RSSI_ANALOG:
+
+		if (arg) {
+			ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_ADC_RSSI);
+		} else {
+			ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_ADC_RSSI, 0);
+		}
+
+		break;
+
+	case RC_INPUT_ENABLE_RSSI_PWM:
+
+		if (arg) {
+			ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_PWM_RSSI);
+		} else {
+			ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, PX4IO_P_SETUP_FEATURES_PWM_RSSI, 0);
+		}
+
+		break;
+
+	case SBUS_SET_PROTO_VERSION:
+
+		if (arg == 1) {
+			ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS1_OUT);
+		} else if (arg == 2) {
+			ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, 0, PX4IO_P_SETUP_FEATURES_SBUS2_OUT);
+		} else {
+			ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FEATURES, (PX4IO_P_SETUP_FEATURES_SBUS1_OUT | PX4IO_P_SETUP_FEATURES_SBUS2_OUT), 0);
+		}
+
+		break;
+
 	default:
 		/* not a recognized value */
 		ret = -ENOTTY;
@@ -2932,6 +2973,60 @@ px4io_main(int argc, char *argv[])
 	if (!strcmp(argv[1], "bind"))
 		bind(argc, argv);
 
+	if (!strcmp(argv[1], "sbus1_out")) {
+		/* we can cheat and call the driver directly, as it
+		 * doesn't reference filp in ioctl()
+		 */
+		int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 1);
+
+		if (ret != 0) {
+			errx(ret, "S.BUS v1 failed");
+		}
+
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "sbus2_out")) {
+		/* we can cheat and call the driver directly, as it
+		 * doesn't reference filp in ioctl()
+		 */
+		int ret = g_dev->ioctl(nullptr, SBUS_SET_PROTO_VERSION, 2);
+
+		if (ret != 0) {
+			errx(ret, "S.BUS v2 failed");
+		}
+
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "rssi_analog")) {
+		/* we can cheat and call the driver directly, as it
+		 * doesn't reference filp in ioctl()
+		 */
+		int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_ANALOG, 1);
+
+		if (ret != 0) {
+			errx(ret, "RSSI analog failed");
+		}
+
+		exit(0);
+	}
+
+	if (!strcmp(argv[1], "rssi_pwm")) {
+		/* we can cheat and call the driver directly, as it
+		 * doesn't reference filp in ioctl()
+		 */
+		int ret = g_dev->ioctl(nullptr, RC_INPUT_ENABLE_RSSI_PWM, 1);
+
+		if (ret != 0) {
+			errx(ret, "RSSI PWM failed");
+		}
+
+		exit(0);
+	}
+
 out:
-	errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug',\n 'recovery', 'limit', 'current', 'bind', 'checkcrc', 'forceupdate' or 'update'");
+	errx(1, "need a command, try 'start', 'stop', 'status', 'test', 'monitor', 'debug <level>',\n"
+	        "'recovery', 'limit <rate>', 'current', 'bind', 'checkcrc',\n"
+	        "'forceupdate', 'update', 'sbus1_out', 'sbus2_out', 'rssi_analog' or 'rssi_pwm'");
 }