mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-11-01 03:41:36 +08:00
docs: update ackermann sih (#25418)
* docs: update ackermann sih * Update metadata to fix broken link --------- Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
This commit is contained in:
chfriedrich98
co-authored by
Hamish Willee
Hamish Willee
parent
2333fb2853
commit
72796a9844
@@ -14274,14 +14274,14 @@ True airspeed measurement noise of the internal wind estimator(s) of the airspee
|
||||
|
||||
### ASPD_WERR_THR (`FLOAT`) {#ASPD_WERR_THR}
|
||||
|
||||
Horizontal wind uncertainty threshold for synthetic airspeed.
|
||||
Horizontal wind uncertainty threshold for valid ground-minus-wind.
|
||||
|
||||
The synthetic airspeed estimate (from groundspeed and heading) will be declared valid
|
||||
The airspeed alternative derived from groundspeed and heading will be declared valid
|
||||
as soon and as long the horizontal wind uncertainty is below this value.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | 0.001 | 5 | | 0.55 | m/s |
|
||||
| | 0.01 | 5 | | 2. | m/s |
|
||||
|
||||
### ASPD_WIND_NSD (`FLOAT`) {#ASPD_WIND_NSD}
|
||||
|
||||
@@ -17403,10 +17403,11 @@ Each threshold value is defined by the parameter indicated next to the check. Dr
|
||||
- `7`: Horizontal speed offset (EKF2_REQ_HDRIFT)
|
||||
- `8`: Vertical speed offset (EKF2_REQ_VDRIFT)
|
||||
- `9`: Spoofing
|
||||
- `10`: GPS fix type (EKF2_REQ_FIX)
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | 0 | 1023 | | 1023 |
|
||||
| | 0 | 2047 | | 2047 |
|
||||
|
||||
### EKF2_GPS_CTRL (`INT32`) {#EKF2_GPS_CTRL}
|
||||
|
||||
@@ -18015,6 +18016,26 @@ Required EPV to use GPS.
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | 2 | 100 | | 5.0 | m |
|
||||
|
||||
### EKF2_REQ_FIX (`INT32`) {#EKF2_REQ_FIX}
|
||||
|
||||
Required GPS fix.
|
||||
|
||||
Minimum GPS fix type required for GPS usage.
|
||||
|
||||
**Values:**
|
||||
|
||||
- `0`: No fix required
|
||||
- `2`: 2D fix
|
||||
- `3`: 3D fix
|
||||
- `4`: RTCM code differential
|
||||
- `5`: RTK float
|
||||
- `6`: RTK fixed
|
||||
- `8`: Extrapolated
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 3 |
|
||||
|
||||
### EKF2_REQ_GPS_H (`FLOAT`) {#EKF2_REQ_GPS_H}
|
||||
|
||||
Required GPS health time on startup.
|
||||
@@ -32577,6 +32598,334 @@ INA238 Power Monitor Shunt.
|
||||
| ------- | ----------- | -------- | ---------- | ------- | ---- |
|
||||
| ✓ | 0.000000001 | 0.1 | .000000001 | 0.0005 |
|
||||
|
||||
### MS_ACCEL_RANGE (`INT32`) {#MS_ACCEL_RANGE}
|
||||
|
||||
Sets the range of the accelerometer.
|
||||
|
||||
-1 = Will not be configured, and will use the device default range,
|
||||
Each adjustable range has a corresponding integer setting. Refer to the device's User Manual to check the available adjustment ranges.
|
||||
https://www.hbkworld.com/en/products/transducers/inertial-sensors#!ref_microstrain.com
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | -1 |
|
||||
|
||||
### MS_ALIGNMENT (`INT32`) {#MS_ALIGNMENT}
|
||||
|
||||
Alignment type.
|
||||
|
||||
Select the source of heading alignment
|
||||
This is a bitfield, you can use more than 1 source
|
||||
Bit 0 - Dual-antenna GNSS
|
||||
Bit 1 - GNSS kinematic (requires motion, e.g. a GNSS velocity)
|
||||
Bit 2 - Magnetometer
|
||||
Bit 3 - External Heading (first valid external heading will be used to initialize the filter)
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 2 |
|
||||
|
||||
### MS_BARO_RATE_HZ (`INT32`) {#MS_BARO_RATE_HZ}
|
||||
|
||||
Barometer data rate.
|
||||
|
||||
Barometer data rate
|
||||
Max Limit: 1000
|
||||
0 - Disable barometer datastream
|
||||
The max limit should be divisible by the rate
|
||||
eg: 1000 % MS_BARO_RATE_HZ = 0
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 50 |
|
||||
|
||||
### MS_EXT_HEAD_EN (`INT32`) {#MS_EXT_HEAD_EN}
|
||||
|
||||
Toggles external heading as an aiding measurement.
|
||||
|
||||
0 = Disabled,
|
||||
1 = Enabled
|
||||
If enabled, the filter will be configured to accept external heading as an aiding meaurement.
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0 |
|
||||
|
||||
### MS_FILT_RATE_HZ (`INT32`) {#MS_FILT_RATE_HZ}
|
||||
|
||||
EKF data Rate.
|
||||
|
||||
EKF data rate
|
||||
Max Limit: 1000
|
||||
0 - Disable EKF datastream
|
||||
The max limit should be divisible by the rate
|
||||
eg: 1000 % MS_FILT_RATE_HZ = 0
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 250 |
|
||||
|
||||
### MS_GNSS_AID_SRC (`INT32`) {#MS_GNSS_AID_SRC}
|
||||
|
||||
GNSS aiding source control.
|
||||
|
||||
Select the source of gnss aiding (GNSS/INS)
|
||||
1 = All internal receivers,
|
||||
2 = External GNSS messages,
|
||||
3 = GNSS receiver 1 only
|
||||
4 = GNSS receiver 2 only
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 1 |
|
||||
|
||||
### MS_GNSS_OFF1_X (`FLOAT`) {#MS_GNSS_OFF1_X}
|
||||
|
||||
GNSS lever arm offset 1 (X).
|
||||
|
||||
Lever arm offset (m) in the X direction for the external GNSS receiver
|
||||
In the case of a dual antenna setup, this is antenna 1
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_GNSS_OFF1_Y (`FLOAT`) {#MS_GNSS_OFF1_Y}
|
||||
|
||||
GNSS lever arm offset 1 (Y).
|
||||
|
||||
Lever arm offset (m) in the Y direction for the external GNSS receiver
|
||||
In the case of a dual antenna setup, this is antenna 1
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_GNSS_OFF1_Z (`FLOAT`) {#MS_GNSS_OFF1_Z}
|
||||
|
||||
GNSS lever arm offset 1 (Z).
|
||||
|
||||
Lever arm offset (m) in the Z direction for the external GNSS receiver
|
||||
In the case of a dual antenna setup, this is antenna 1
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_GNSS_OFF2_X (`FLOAT`) {#MS_GNSS_OFF2_X}
|
||||
|
||||
GNSS lever arm offset 2 (X).
|
||||
|
||||
Lever arm offset (m) in the X direction for antenna 2
|
||||
This will only be used if the device supports a dual antenna setup
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_GNSS_OFF2_Y (`FLOAT`) {#MS_GNSS_OFF2_Y}
|
||||
|
||||
GNSS lever arm offset 2 (Y).
|
||||
|
||||
Lever arm offset (m) in the Y direction for antenna 2
|
||||
This will only be used if the device supports a dual antenna setup
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_GNSS_OFF2_Z (`FLOAT`) {#MS_GNSS_OFF2_Z}
|
||||
|
||||
GNSS lever arm offset 2 (Z).
|
||||
|
||||
Lever arm offset (m) in the X direction for antenna 2
|
||||
This will only be used if the device supports a dual antenna setup
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_GNSS_RATE_HZ (`INT32`) {#MS_GNSS_RATE_HZ}
|
||||
|
||||
GNSS data Rate.
|
||||
|
||||
GNSS receiver 1 and 2 data rate
|
||||
Max Limit: 5
|
||||
The max limit should be divisible by the rate
|
||||
0 - Disable GNSS datastream
|
||||
eg: 5 % MS_GNSS_RATE_HZ = 0
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 5 |
|
||||
|
||||
### MS_GYRO_RANGE (`INT32`) {#MS_GYRO_RANGE}
|
||||
|
||||
Sets the range of the gyro.
|
||||
|
||||
-1 = Will not be configured, and will use the device default range,
|
||||
Each adjustable range has a corresponding integer setting. Refer to the device's User Manual to check the available adjustment ranges.
|
||||
https://www.hbkworld.com/en/products/transducers/inertial-sensors#!ref_microstrain.com
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | -1 |
|
||||
|
||||
### MS_IMU_RATE_HZ (`INT32`) {#MS_IMU_RATE_HZ}
|
||||
|
||||
IMU Data Rate.
|
||||
|
||||
IMU (Accelerometer and Gyroscope) data rate
|
||||
The INS driver will be scheduled at a rate 2\*MS_IMU_RATE_HZ
|
||||
Max Limit: 1000
|
||||
0 - Disable IMU datastream
|
||||
The max limit should be divisible by the rate
|
||||
eg: 1000 % MS_IMU_RATE_HZ = 0
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 500 |
|
||||
|
||||
### MS_INT_HEAD_EN (`INT32`) {#MS_INT_HEAD_EN}
|
||||
|
||||
Toggles internal heading as an aiding measurement.
|
||||
|
||||
0 = Disabled,
|
||||
1 = Enabled
|
||||
If dual antennas are supported (CV7-GNSS/INS). The filter will be configured to use dual antenna heading as an aiding measurement.
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0 |
|
||||
|
||||
### MS_INT_MAG_EN (`INT32`) {#MS_INT_MAG_EN}
|
||||
|
||||
Toggles internal magnetometer aiding in the device filter.
|
||||
|
||||
0 = Disabled,
|
||||
1 = Enabled
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0 |
|
||||
|
||||
### MS_MAG_RATE_HZ (`INT32`) {#MS_MAG_RATE_HZ}
|
||||
|
||||
Magnetometer Data Rate.
|
||||
|
||||
Magnetometer data rate
|
||||
Max Limit: 1000
|
||||
0 - Disable magnetometer datastream
|
||||
The max limit should be divisible by the rate
|
||||
eg: 1000 % MS_MAG_RATE_HZ = 0
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 50 |
|
||||
|
||||
### MS_MODE (`INT32`) {#MS_MODE}
|
||||
|
||||
Toggles using the device as the primary EKF.
|
||||
|
||||
Setting to 1 will publish data from the device to the vehicle topics (global_position, attitude, local_position, odometry), estimator_status and sensor_selection
|
||||
Setting to 0 will publish data from the device to the external_ins topics (global position, attitude, local position)
|
||||
Restart Required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 1 |
|
||||
|
||||
### MS_SENSOR_PTCH (`FLOAT`) {#MS_SENSOR_PTCH}
|
||||
|
||||
Sensor to Vehicle Transform (Pitch).
|
||||
|
||||
The orientation of the device (Radians) with respect to the vehicle frame around the y axis
|
||||
Requires MS_SVT_EN to be enabled to be used
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_SENSOR_ROLL (`FLOAT`) {#MS_SENSOR_ROLL}
|
||||
|
||||
Sensor to Vehicle Transform (Roll).
|
||||
|
||||
The orientation of the device (Radians) with respect to the vehicle frame around the x axis
|
||||
Requires MS_SVT_EN to be enabled to be used
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_SENSOR_YAW (`FLOAT`) {#MS_SENSOR_YAW}
|
||||
|
||||
Sensor to Vehicle Transform (Yaw).
|
||||
|
||||
The orientation of the device (Radians) with respect to the vehicle frame around the z axis
|
||||
Requires MS_SVT_EN to be enabled to be used
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0.0 |
|
||||
|
||||
### MS_SVT_EN (`INT32`) {#MS_SVT_EN}
|
||||
|
||||
Enables sensor to vehicle transform.
|
||||
|
||||
0 = Disabled,
|
||||
1 = Enabled
|
||||
If the sensor has a different orientation with respect to the vehicle. This will enable a transform to correct itself.
|
||||
The transform is described by MS_SENSOR_ROLL, MS_SENSOR_PITCH, MS_SENSOR_YAW
|
||||
Restart required
|
||||
This parameter is specific to the MicroStrain driver.
|
||||
|
||||
| Reboot | minValue | maxValue | increment | default | unit |
|
||||
| ------ | -------- | -------- | --------- | ------- | ---- |
|
||||
| | | | | 0 |
|
||||
|
||||
### PCF8583_MAGNET (`INT32`) {#PCF8583_MAGNET}
|
||||
|
||||
PCF8583 rotorfreq (i2c) pulse count.
|
||||
|
||||
Reference in New Issue
Block a user