fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-21 05:33:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

Changes for multi-rate PWM output; default and alternate rates. ioctl protocol, PX4IO support.

Browse Source
This commit is contained in:
px4dev
2013-03-12 22:22:49 -07:00
parent 6b947a67d0
commit 6cf0758b24
6 changed files with 212 additions and 92 deletions
Download Patch File Download Diff File Expand all files Collapse all files
apps/drivers/drv_pwm_output.h
+32 -15
View File
@@ -36,7 +36,7 @@
*
* Servo values can be set with the PWM_SERVO_SET ioctl, by writing a
* pwm_output_values structure to the device, or by publishing to the
* output_pwm ObjDev.
* output_pwm ORB topic.
* Writing a value of 0 to a channel suppresses any output for that
* channel.
*/
@@ -60,7 +60,7 @@ __BEGIN_DECLS
#define PWM_OUTPUT_DEVICE_PATH "/dev/pwm_output"
/**
* Maximum number of PWM output channels in the system.
* Maximum number of PWM output channels supported by the device.
*/
#define PWM_OUTPUT_MAX_CHANNELS 16
@@ -82,14 +82,14 @@ struct pwm_output_values {
};
/*
* ObjDev tag for PWM outputs.
* ORB tag for PWM outputs.
*/
ORB_DECLARE(output_pwm);
/*
* ioctl() definitions
*
* Note that ioctls and ObjDev updates should not be mixed, as the
* Note that ioctls and ORB updates should not be mixed, as the
* behaviour of the system in this case is not defined.
*/
#define _PWM_SERVO_BASE 0x2a00
@@ -100,20 +100,14 @@ ORB_DECLARE(output_pwm);
/** disarm all servo outputs (stop generating pulses) */
#define PWM_SERVO_DISARM _IOC(_PWM_SERVO_BASE, 1)
/** set update rate in Hz */
#define PWM_SERVO_SET_UPDATE_RATE _IOC(_PWM_SERVO_BASE, 2)
/** set alternate servo update rate */
#define PWM_SERVO_SET_UPDATE_RATE _IOC(_PWM_SERVO_BASE, 2)
/** get the number of servos in *(unsigned *)arg */
#define PWM_SERVO_GET_COUNT _IOC(_PWM_SERVO_BASE, 3)
/** set debug level for servo IO */
#define PWM_SERVO_SET_DEBUG _IOC(_PWM_SERVO_BASE, 4)
/** enable in-air restart */
#define PWM_SERVO_INAIR_RESTART_ENABLE _IOC(_PWM_SERVO_BASE, 5)
/** disable in-air restart */
#define PWM_SERVO_INAIR_RESTART_DISABLE _IOC(_PWM_SERVO_BASE, 6)
/** selects servo update rates, one bit per servo. 0 = default (50Hz), 1 = alternate */
#define PWM_SERVO_SELECT_UPDATE_RATE _IOC(_PWM_SERVO_BASE, 4)
/** set a single servo to a specific value */
#define PWM_SERVO_SET(_servo) _IOC(_PWM_SERVO_BASE, 0x20 + _servo)
@@ -121,6 +115,10 @@ ORB_DECLARE(output_pwm);
/** get a single specific servo value */
#define PWM_SERVO_GET(_servo) _IOC(_PWM_SERVO_BASE, 0x40 + _servo)
/** get the _n'th rate group's channels; *(uint32_t *)arg returns a bitmap of channels
* whose update rates must be the same.
*/
#define PWM_SERVO_GET_RATEGROUP(_n) _IOC(_PWM_SERVO_BASE, 0x60 + _n)
/*
* Low-level PWM output interface.
@@ -157,13 +155,32 @@ __EXPORT extern void up_pwm_servo_deinit(void);
__EXPORT extern void up_pwm_servo_arm(bool armed);
/**
* Set the servo update rate
* Set the servo update rate for all rate groups.
*
* @param rate The update rate in Hz to set.
* @return OK on success, -ERANGE if an unsupported update rate is set.
*/
__EXPORT extern int up_pwm_servo_set_rate(unsigned rate);
/**
* Get a bitmap of output channels assigned to a given rate group.
*
* @param group The rate group to query. Rate groups are assigned contiguously
* starting from zero.
* @return A bitmap of channels assigned to the rate group, or zero if
* the group number has no channels.
*/
__EXPORT extern uint32_t up_pwm_servo_get_rate_group(unsigned group);
/**
* Set the update rate for a given rate group.
*
* @param group The rate group whose update rate will be changed.
* @param rate The update rate in Hz.
* @return OK if the group was adjusted, -ERANGE if an unsupported update rate is set.
*/
__EXPORT extern int up_pwm_servo_set_rate_group_update(unsigned group, unsigned rate);
/**
* Set the current output value for a channel.
*
apps/drivers/px4io/px4io.cpp
+65 -35
View File
@@ -86,6 +86,8 @@
#include "uploader.h"
#include <debug.h>
#define PX4IO_SET_DEBUG _IOC(0xff00, 0)
#define PX4IO_INAIR_RESTART_ENABLE _IOC(0xff00, 1)
class PX4IO : public device::I2C
{
@@ -1223,14 +1225,15 @@ PX4IO::print_status()
((flags & PX4IO_P_STATUS_FLAGS_ARM_SYNC) ? " ARM_SYNC" : " ARM_NO_SYNC"),
((flags & PX4IO_P_STATUS_FLAGS_INIT_OK) ? " INIT_OK" : " INIT_FAIL"));
uint16_t alarms = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_ALARMS);
printf("alarms 0x%04x%s%s%s%s%s%s\n",
printf("alarms 0x%04x%s%s%s%s%s%s%s\n",
alarms,
((alarms & PX4IO_P_STATUS_ALARMS_VBATT_LOW) ? " VBATT_LOW" : ""),
((alarms & PX4IO_P_STATUS_ALARMS_TEMPERATURE) ? " TEMPERATURE" : ""),
((alarms & PX4IO_P_STATUS_ALARMS_SERVO_CURRENT) ? " SERVO_CURRENT" : ""),
((alarms & PX4IO_P_STATUS_ALARMS_ACC_CURRENT) ? " ACC_CURRENT" : ""),
((alarms & PX4IO_P_STATUS_ALARMS_FMU_LOST) ? " FMU_LOST" : ""),
((alarms & PX4IO_P_STATUS_ALARMS_RC_LOST) ? " RC_LOST" : ""));
((alarms & PX4IO_P_STATUS_ALARMS_RC_LOST) ? " RC_LOST" : ""),
((alarms & PX4IO_P_STATUS_ALARMS_PWM_ERROR) ? " PWM_ERROR" : ""));
printf("vbatt %u ibatt %u\n",
io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_VBATT),
io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_IBATT));
@@ -1269,10 +1272,10 @@ PX4IO::print_status()
((arming & PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK) ? " MANUAL_OVERRIDE_OK" : ""),
((arming & PX4IO_P_SETUP_ARMING_VECTOR_FLIGHT_OK) ? " VECTOR_FLIGHT_OK" : ""),
((arming & PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK) ? " INAIR_RESTART_OK" : ""));
printf("rates 0x%04x lowrate %u highrate %u relays 0x%04x\n",
printf("rates 0x%04x default %u alt %u relays 0x%04x\n",
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_RATES),
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_LOWRATE),
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_HIGHRATE),
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_DEFAULTRATE),
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_ALTRATE),
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS));
printf("vbatt scale %u ibatt scale %u ibatt bias %u\n",
io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_VBATT_SCALE),
@@ -1320,36 +1323,39 @@ PX4IO::ioctl(file *filep, int cmd, unsigned long arg)
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_ARM_OK, 0);
break;
case PWM_SERVO_INAIR_RESTART_ENABLE:
/* set the 'in-air restart' bit */
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, 0, PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK);
break;
case PWM_SERVO_INAIR_RESTART_DISABLE:
/* unset the 'in-air restart' bit */
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK, 0);
break;
case PWM_SERVO_SET_UPDATE_RATE:
/* set the requested rate */
if ((arg >= 50) && (arg <= 400)) {
ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_HIGHRATE, arg);
/* set the requested alternate rate */
if ((arg >= 50) && (arg <= 400)) { /* TODO: we could go higher for e.g. TurboPWM */
ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_ALTRATE, arg);
} else {
ret = -EINVAL;
}
break;
case PWM_SERVO_SELECT_UPDATE_RATE: {
/* blindly clear the PWM update alarm - might be set for some other reason */
io_reg_set(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_ALARMS, PX4IO_P_STATUS_ALARMS_PWM_ERROR);
/* attempt to set the rate map */
io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_PWM_RATES, arg);
/* check that the changes took */
uint16_t alarms = io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_ALARMS);
if (alarms & PX4IO_P_STATUS_ALARMS_PWM_ERROR) {
ret = -EINVAL;
io_reg_set(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_ALARMS, PX4IO_P_STATUS_ALARMS_PWM_ERROR);
}
break;
}
case PWM_SERVO_GET_COUNT:
*(unsigned *)arg = _max_actuators;
break;
case PWM_SERVO_SET_DEBUG:
/* set the debug level */
ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_SET_DEBUG, arg);
break;
case PWM_SERVO_SET(0) ... PWM_SERVO_SET(PWM_OUTPUT_MAX_CHANNELS): {
case PWM_SERVO_SET(0) ... PWM_SERVO_SET(PWM_OUTPUT_MAX_CHANNELS - 1): {
/* TODO: we could go lower for e.g. TurboPWM */
unsigned channel = cmd - PWM_SERVO_SET(0);
if ((channel >= _max_actuators) || (arg < 900) || (arg > 2100)) {
ret = -EINVAL;
@@ -1361,7 +1367,7 @@ PX4IO::ioctl(file *filep, int cmd, unsigned long arg)
break;
}
case PWM_SERVO_GET(0) ... PWM_SERVO_GET(PWM_OUTPUT_MAX_CHANNELS): {
case PWM_SERVO_GET(0) ... PWM_SERVO_GET(PWM_OUTPUT_MAX_CHANNELS - 1): {
unsigned channel = cmd - PWM_SERVO_GET(0);
@@ -1379,6 +1385,16 @@ PX4IO::ioctl(file *filep, int cmd, unsigned long arg)
break;
}
case PWM_SERVO_GET_RATEGROUP(0) ... PWM_SERVO_GET_RATEGROUP(PWM_OUTPUT_MAX_CHANNELS - 1): {
unsigned channel = cmd - PWM_SERVO_GET_RATEGROUP(0);
uint32_t value = io_reg_get(PX4IO_PAGE_PWM_INFO, PX4IO_RATE_MAP_BASE + channel);
*(uint32_t *)arg = value;
break;
}
case GPIO_RESET:
ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RELAYS, 0);
break;
@@ -1443,6 +1459,20 @@ PX4IO::ioctl(file *filep, int cmd, unsigned long arg)
break;
}
case PX4IO_SET_DEBUG:
/* set the debug level */
ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_SET_DEBUG, arg);
break;
case PX4IO_INAIR_RESTART_ENABLE:
/* set/clear the 'in-air restart' bit */
if (arg) {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, 0, PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK);
} else {
ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK, 0);
}
break;
default:
/* not a recognized value */
ret = -ENOTTY;
@@ -1602,7 +1632,7 @@ px4io_main(int argc, char *argv[])
* We can cheat and call the driver directly, as it
* doesn't reference filp in ioctl()
*/
g_dev->ioctl(NULL, PWM_SERVO_INAIR_RESTART_ENABLE, 0);
g_dev->ioctl(NULL, PX4IO_INAIR_RESTART_ENABLE, 1);
} else {
errx(1, "not loaded");
}
@@ -1623,16 +1653,16 @@ px4io_main(int argc, char *argv[])
if (!strcmp(argv[1], "status")) {
if (g_dev != nullptr) {
printf("[px4io] loaded\n");
g_dev->print_status();
} else {
printf("[px4io] not loaded\n");
}
exit(0);
if (g_dev != nullptr) {
printf("[px4io] loaded\n");
g_dev->print_status();
} else {
printf("[px4io] not loaded\n");
}
exit(0);
}
if (!strcmp(argv[1], "debug")) {
if (argc <= 2) {
printf("usage: px4io debug LEVEL\n");
@@ -1646,7 +1676,7 @@ px4io_main(int argc, char *argv[])
/* we can cheat and call the driver directly, as it
* doesn't reference filp in ioctl()
*/
int ret = g_dev->ioctl(NULL, PWM_SERVO_SET_DEBUG, level);
int ret = g_dev->ioctl(NULL, PX4IO_SET_DEBUG, level);
if (ret != 0) {
printf("SET_DEBUG failed - %d\n", ret);
exit(1);
apps/drivers/stm32/drv_pwm_servo.c
+34 -15
View File
@@ -68,10 +68,6 @@
#include <stm32_gpio.h>
#include <stm32_tim.h>
/* default rate (in Hz) of PWM updates */
static uint32_t pwm_update_rate = 50;
#define REG(_tmr, _reg) (*(volatile uint32_t *)(pwm_timers[_tmr].base + _reg))
#define rCR1(_tmr) REG(_tmr, STM32_GTIM_CR1_OFFSET)
@@ -93,6 +89,10 @@ static uint32_t pwm_update_rate = 50;
#define rDCR(_tmr) REG(_tmr, STM32_GTIM_DCR_OFFSET)
#define rDMAR(_tmr) REG(_tmr, STM32_GTIM_DMAR_OFFSET)
static void pwm_timer_init(unsigned timer);
static void pwm_timer_set_rate(unsigned timer, unsigned rate);
static void pwm_channel_init(unsigned channel);
static void
pwm_timer_init(unsigned timer)
{
@@ -113,11 +113,8 @@ pwm_timer_init(unsigned timer)
/* configure the timer to free-run at 1MHz */
rPSC(timer) = (pwm_timers[timer].clock_freq / 1000000) - 1;
/* and update at the desired rate */
rARR(timer) = (1000000 / pwm_update_rate) - 1;
/* generate an update event; reloads the counter and all registers */
rEGR(timer) = GTIM_EGR_UG;
/* default to updating at 50Hz */
pwm_timer_set_rate(timer, 50);
/* note that the timer is left disabled - arming is performed separately */
}
@@ -272,19 +269,41 @@ up_pwm_servo_deinit(void)
}
int
up_pwm_servo_set_rate(unsigned rate)
up_pwm_servo_set_rate_group_update(unsigned group, unsigned rate)
{
if ((rate < 50) || (rate > 400))
/* limit update rate to 1..10000Hz; somewhat arbitrary but safe */
if (rate < 1)
return -ERANGE;
if (rate > 10000)
return -ERANGE;
for (unsigned i = 0; i < PWM_SERVO_MAX_TIMERS; i++) {
if (pwm_timers[i].base != 0)
pwm_timer_set_rate(i, rate);
}
if ((group >= PWM_SERVO_MAX_TIMERS) || (pwm_timers[group].base == 0))
return ERROR;
pwm_timer_set_rate(group, rate);
return OK;
}
int
up_pwm_servo_set_rate(unsigned rate)
{
for (unsigned i = 0; i < PWM_SERVO_MAX_TIMERS; i++)
up_pwm_servo_set_rate_group_update(i, rate);
}
uint32_t
up_pwm_servo_get_rate_group(unsigned group)
{
unsigned channels = 0;
for (unsigned i = 0; i < PWM_SERVO_MAX_CHANNELS; i++) {
if ((pwm_channels[i].gpio != 0) && (pwm_channels[i].timer_index == group))
channels |= (1 << i);
}
return channels;
}
void
up_pwm_servo_arm(bool armed)
{