Merge branch 'master' into mc_mixer_fix

ROMFS/px4fmu_common/init.d/rc.logging

@@ -8,7 +8,7 @@ then
 	if ver hwcmp PX4FMU_V1
 	then
 		echo "Start sdlog2 at 50Hz"
-		sdlog2 start -r 50 -a -b 5 -t
+		sdlog2 start -r 50 -a -b 4 -t
 	else
 		echo "Start sdlog2 at 200Hz"
 		sdlog2 start -r 200 -a -b 16 -t

makefiles/config_aerocore_default.mk

@@ -53,7 +53,7 @@ MODULES		+= modules/mavlink
 #
 MODULES		+= modules/attitude_estimator_ekf
 MODULES		+= modules/attitude_estimator_so3
-MODULES		+= modules/fw_att_pos_estimator
+MODULES		+= modules/ekf_att_pos_estimator
 MODULES		+= modules/position_estimator_inav
 
 #

nuttx-configs/px4fmu-v1/nsh/defconfig

@@ -418,7 +418,7 @@ CONFIG_PREALLOC_TIMERS=50
 # Stack and heap information
 #
 CONFIG_IDLETHREAD_STACKSIZE=4096
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_USERMAIN_STACKSIZE=3500
 CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_PTHREAD_STACK_DEFAULT=2048
 

src/drivers/frsky_telemetry/frsky_data.c

@@ -53,6 +53,8 @@
 #include <uORB/topics/vehicle_global_position.h>
 #include <uORB/topics/vehicle_status.h>
 
+#include <drivers/drv_hrt.h>
+
 /* FrSky sensor hub data IDs */
 #define FRSKY_ID_GPS_ALT_BP     0x01
 #define FRSKY_ID_TEMP1          0x02

src/drivers/frsky_telemetry/frsky_telemetry.c

@@ -222,7 +222,7 @@ int frsky_telemetry_main(int argc, char *argv[])
 		frsky_task = task_spawn_cmd("frsky_telemetry",
 					  SCHED_DEFAULT,
 					  SCHED_PRIORITY_DEFAULT,
-					  2048,
+					  2000,
 					  frsky_telemetry_thread_main,
 					  (const char **)argv);
 

src/drivers/frsky_telemetry/module.mk

@@ -39,3 +39,5 @@ MODULE_COMMAND	= frsky_telemetry
 
 SRCS		= frsky_data.c \
               frsky_telemetry.c
+
+MODULE_STACKSIZE = 1200

src/drivers/gps/gps.cpp

@@ -1,6 +1,6 @@
 /****************************************************************************
  *
- *   Copyright (C) 2013 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -56,6 +56,7 @@
 #include <arch/board/board.h>
 #include <drivers/drv_hrt.h>
 #include <drivers/device/i2c.h>
+#include <systemlib/systemlib.h>
 #include <systemlib/perf_counter.h>
 #include <systemlib/scheduling_priorities.h>
 #include <systemlib/err.h>
@@ -78,12 +79,6 @@
 #endif
 static const int ERROR = -1;
 
-#ifndef CONFIG_SCHED_WORKQUEUE
-# error This requires CONFIG_SCHED_WORKQUEUE.
-#endif
-
-
-
 class GPS : public device::CDev
 {
 public:
@@ -211,7 +206,8 @@ GPS::init()
 		goto out;
 
 	/* start the GPS driver worker task */
-	_task = task_create("gps", SCHED_PRIORITY_SLOW_DRIVER, 2048, (main_t)&GPS::task_main_trampoline, nullptr);
+	_task = task_spawn_cmd("gps", SCHED_DEFAULT,
+				SCHED_PRIORITY_SLOW_DRIVER, 2000, (main_t)&GPS::task_main_trampoline, nullptr);
 
 	if (_task < 0) {
 		warnx("task start failed: %d", errno);

src/drivers/gps/module.mk

@@ -41,3 +41,5 @@ SRCS		= gps.cpp \
 		  gps_helper.cpp \
 		  mtk.cpp \
 		  ubx.cpp
+
+MODULE_STACKSIZE = 1200

src/drivers/px4io/px4io.cpp

@@ -794,7 +794,12 @@ PX4IO::init()
 	}
 
 	/* start the IO interface task */
-	_task = task_create("px4io", SCHED_PRIORITY_ACTUATOR_OUTPUTS, 2048, (main_t)&PX4IO::task_main_trampoline, nullptr);
+	_task = task_spawn_cmd("px4io",
+					SCHED_DEFAULT,
+					SCHED_PRIORITY_ACTUATOR_OUTPUTS,
+					2000,
+					(main_t)&PX4IO::task_main_trampoline,
+					nullptr);
 
 	if (_task < 0) {
 		debug("task start failed: %d", errno);
@@ -989,13 +994,17 @@ PX4IO::task_main()
 				int32_t failsafe_param_val;
 				param_t failsafe_param = param_find("RC_FAILS_THR");
 
-				if (failsafe_param > 0) {
+				if (failsafe_param != PARAM_INVALID) {
 
 					param_get(failsafe_param, &failsafe_param_val);
-					uint16_t failsafe_thr = failsafe_param_val;
+
-					pret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RC_THR_FAILSAFE_US, &failsafe_thr, 1);
+					if (failsafe_param_val > 0) {
-					if (pret != OK) {
+
-						log("failsafe upload failed");
+						uint16_t failsafe_thr = failsafe_param_val;
+						pret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_RC_THR_FAILSAFE_US, &failsafe_thr, 1);
+						if (pret != OK) {
+							log("failsafe upload failed, FS: %d us", (int)failsafe_thr);
+						}
 					}
 				}
 

src/examples/flow_position_estimator/flow_position_estimator_main.c

@@ -65,6 +65,7 @@
 #include <uORB/topics/optical_flow.h>
 #include <uORB/topics/filtered_bottom_flow.h>
 #include <systemlib/perf_counter.h>
+#include <systemlib/systemlib.h>
 #include <poll.h>
 
 #include "flow_position_estimator_params.h"
@@ -109,9 +110,9 @@ int flow_position_estimator_main(int argc, char *argv[])
 
 		thread_should_exit = false;
 		daemon_task = task_spawn_cmd("flow_position_estimator",
-					 SCHED_RR,
+					 SCHED_DEFAULT,
 					 SCHED_PRIORITY_MAX - 5,
-					 4096,
+					 4000,
 					 flow_position_estimator_thread_main,
 					 (argv) ? (const char **)&argv[2] : (const char **)NULL);
 		exit(0);

src/modules/mavlink/mavlink_main.cpp

@@ -2204,7 +2204,7 @@ Mavlink::start(int argc, char *argv[])
 	task_spawn_cmd(buf,
 		       SCHED_DEFAULT,
 		       SCHED_PRIORITY_DEFAULT,
-		       2000,
+		       1950,
 		       (main_t)&Mavlink::start_helper,
 		       (const char **)argv);
 

src/modules/mavlink/mavlink_receiver.cpp

@@ -949,7 +949,7 @@ MavlinkReceiver::receive_start(Mavlink *parent)
 	param.sched_priority = SCHED_PRIORITY_MAX - 40;
 	(void)pthread_attr_setschedparam(&receiveloop_attr, &param);
 
-	pthread_attr_setstacksize(&receiveloop_attr, 3000);
+	pthread_attr_setstacksize(&receiveloop_attr, 2900);
 
 	pthread_t thread;
 	pthread_create(&thread, &receiveloop_attr, MavlinkReceiver::start_helper, (void *)parent);

src/modules/position_estimator_inav/module.mk

@@ -39,3 +39,5 @@ MODULE_COMMAND	 	= position_estimator_inav
 SRCS		 	= position_estimator_inav_main.c \
 			position_estimator_inav_params.c \
 			inertial_filter.c
+
+MODULE_STACKSIZE = 1200

src/modules/position_estimator_inav/position_estimator_inav_main.c

@@ -135,7 +135,7 @@ int position_estimator_inav_main(int argc, char *argv[])
 
 		thread_should_exit = false;
 		position_estimator_inav_task = task_spawn_cmd("position_estimator_inav",
-					       SCHED_RR, SCHED_PRIORITY_MAX - 5, 4096,
+					       SCHED_DEFAULT, SCHED_PRIORITY_MAX - 5, 4000,
 					       position_estimator_inav_thread_main,
 					       (argv) ? (const char **) &argv[2] : (const char **) NULL);
 		exit(0);

src/modules/px4iofirmware/protocol.h

@@ -190,6 +190,8 @@
 #define PX4IO_P_SETUP_RELAYS_POWER2		(1<<1)	/* hardware rev [1] power relay 2 */
 #define PX4IO_P_SETUP_RELAYS_ACC1		(1<<2)	/* hardware rev [1] accessory power 1 */
 #define PX4IO_P_SETUP_RELAYS_ACC2		(1<<3)	/* hardware rev [1] accessory power 2 */
+#else
+#define PX4IO_P_SETUP_RELAYS_PAD		5
 #endif
 
 #define PX4IO_P_SETUP_VBATT_SCALE		6	/* hardware rev [1] battery voltage correction factor (float) */
@@ -209,15 +211,16 @@ enum {							/* DSM bind states */
 #define PX4IO_REBOOT_BL_MAGIC			14662	/* required argument for reboot (random) */
 
 #define PX4IO_P_SETUP_CRC			11	/* get CRC of IO firmware */
-						/* 12 occupied by CRC */
+						/* storage space of 12 occupied by CRC */
+#define PX4IO_P_SETUP_FORCE_SAFETY_OFF		12	/* force safety switch into
+                                                           'armed' (PWM enabled) state - this is a non-data write and
+                                                           hence index 12 can safely be used. */
 #define PX4IO_P_SETUP_RC_THR_FAILSAFE_US	13	/**< the throttle failsafe pulse length in microseconds */
 
-#define PX4IO_P_SETUP_FORCE_SAFETY_OFF	       12	/* force safety switch into
+#define PX4IO_FORCE_SAFETY_MAGIC		22027	/* required argument for force safety (random) */
-                                                           'armed' (PWM enabled) state */
-#define PX4IO_FORCE_SAFETY_MAGIC            22027       /* required argument for force safety (random) */
 
 /* autopilot control values, -10000..10000 */
-#define PX4IO_PAGE_CONTROLS			51		/**< actuator control groups, one after the other, 8 wide */
+#define PX4IO_PAGE_CONTROLS			51	/**< actuator control groups, one after the other, 8 wide */
 #define PX4IO_P_CONTROLS_GROUP_0		(PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 0)	/**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */
 #define PX4IO_P_CONTROLS_GROUP_1		(PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 1)	/**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */
 #define PX4IO_P_CONTROLS_GROUP_2		(PX4IO_PROTOCOL_MAX_CONTROL_COUNT * 2)	/**< 0..PX4IO_PROTOCOL_MAX_CONTROL_COUNT - 1 */

src/modules/px4iofirmware/registers.c

@@ -160,6 +160,9 @@ volatile uint16_t	r_page_setup[] =
 	[PX4IO_P_SETUP_PWM_ALTRATE]		= 200,
 #ifdef CONFIG_ARCH_BOARD_PX4IO_V1
 	[PX4IO_P_SETUP_RELAYS]			= 0,
+#else
+	/* this is unused, but we will pad it for readability (the compiler pads it automatically) */
+	[PX4IO_P_SETUP_RELAYS_PAD]		= 0,
 #endif
 #ifdef ADC_VSERVO
 	[PX4IO_P_SETUP_VSERVO_SCALE]		= 10000,
@@ -523,18 +526,22 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value)
 			break;
 
 		case PX4IO_P_SETUP_PWM_DEFAULTRATE:
-			if (value < 50)
+			if (value < 50) {
 				value = 50;
-			if (value > 400)
+			}
+			if (value > 400) {
 				value = 400;
+			}
 			pwm_configure_rates(r_setup_pwm_rates, value, r_setup_pwm_altrate);
 			break;
 
 		case PX4IO_P_SETUP_PWM_ALTRATE:
-			if (value < 50)
+			if (value < 50) {
 				value = 50;
-			if (value > 400)
+			}
+			if (value > 400) {
 				value = 400;
+			}
 			pwm_configure_rates(r_setup_pwm_rates, r_setup_pwm_defaultrate, value);
 			break;
 
@@ -566,8 +573,9 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value)
 			}
 
 			// check the magic value
-			if (value != PX4IO_REBOOT_BL_MAGIC)
+			if (value != PX4IO_REBOOT_BL_MAGIC) {
 				break;
+			}
 
                         // we schedule a reboot rather than rebooting
                         // immediately to allow the IO board to ACK
@@ -585,6 +593,12 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value)
 			}
 			break;
 
+		case PX4IO_P_SETUP_RC_THR_FAILSAFE_US:
+			if (value > 650 && value < 2350) {
+				r_page_setup[PX4IO_P_SETUP_RC_THR_FAILSAFE_US] = value;
+			}
+			break;
+
 		default:
 			return -1;
 		}

src/modules/sdlog2/sdlog2.c

@@ -684,7 +684,7 @@ int sdlog2_thread_main(int argc, char *argv[])
 		case 'r': {
 				unsigned long r = strtoul(optarg, NULL, 10);
 
-				if (r <= 0) {
+				if (r == 0) {
 					r = 1;
 				}
 
@@ -834,6 +834,8 @@ int sdlog2_thread_main(int argc, char *argv[])
 			struct log_ESTM_s log_ESTM;
 			struct log_PWR_s log_PWR;
 			struct log_VICN_s log_VICN;
+			struct log_GSN0_s log_GSN0;
+			struct log_GSN1_s log_GSN1;
 		} body;
 	} log_msg = {
 		LOG_PACKET_HEADER_INIT(0)
@@ -982,6 +984,18 @@ int sdlog2_thread_main(int argc, char *argv[])
 			log_msg.body.log_GPS.vel_d = buf_gps_pos.vel_d_m_s;
 			log_msg.body.log_GPS.cog = buf_gps_pos.cog_rad;
 			LOGBUFFER_WRITE_AND_COUNT(GPS);
+
+			/* log the SNR of each satellite for a detailed view of signal quality */
+			log_msg.msg_type = LOG_GSN0_MSG;
+			/* pick the smaller number so we do not overflow any of the arrays */
+			unsigned gps_msg_max_snr = sizeof(buf_gps_pos.satellite_snr) / sizeof(buf_gps_pos.satellite_snr[0]);
+			unsigned log_max_snr = sizeof(log_msg.body.log_GSN0.satellite_snr) / sizeof(log_msg.body.log_GSN0.satellite_snr[0]);
+			unsigned sat_max_snr = (gps_msg_max_snr < log_max_snr) ? gps_msg_max_snr : log_max_snr;
+
+			for (unsigned i = 0; i < sat_max_snr; i++) {
+				log_msg.body.log_GSN0.satellite_snr[i] = buf_gps_pos.satellite_snr[i];
+			}
+			LOGBUFFER_WRITE_AND_COUNT(GSN0);
 		}
 
 		/* --- SENSOR COMBINED --- */

src/modules/sdlog2/sdlog2_messages.h

@@ -317,6 +317,18 @@ struct log_VICN_s {
 	float yaw;
 };
 
+/* --- GSN0 - GPS SNR #0 --- */
+#define LOG_GSN0_MSG 26
+struct log_GSN0_s {
+	uint8_t satellite_snr[16];			/**< Signal to noise ratio of satellite. 0 for none, 255 for max. */
+};
+
+/* --- GSN1 - GPS SNR #1 --- */
+#define LOG_GSN1_MSG 27
+struct log_GSN1_s {
+	uint8_t satellite_snr[16];			/**< Signal to noise ratio of satellite. 0 for none, 255 for max. */
+};
+
 /********** SYSTEM MESSAGES, ID > 0x80 **********/
 
 /* --- TIME - TIME STAMP --- */
@@ -368,6 +380,8 @@ static const struct log_format_s log_formats[] = {
 	LOG_FORMAT(ESTM, "ffffffffffBBBB",	"s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,nStat,statNaN,covNaN,kGainNaN"),
 	LOG_FORMAT(PWR, "fffBBBBB",		"Periph5V,Servo5V,RSSI,UsbOk,BrickOk,ServoOk,PeriphOC,HipwrOC"),
 	LOG_FORMAT(VICN, "ffffff",		"X,Y,Z,Roll,Pitch,Yaw"),
+	LOG_FORMAT(GSN0, "BBBBBBBBBBBBBBBB",	"s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"),
+	LOG_FORMAT(GSN1, "BBBBBBBBBBBBBBBB",	"s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"),
 
 	/* system-level messages, ID >= 0x80 */
 	/* FMT: don't write format of format message, it's useless */

src/systemcmds/nshterm/module.mk

@@ -38,4 +38,4 @@
 MODULE_COMMAND	 = nshterm
 SRCS		 = nshterm.c
 
-MODULE_STACKSIZE = 1500
+MODULE_STACKSIZE = 1200