esc_report: remove unused fields to reduce message size

esc_setpoint in UAVCAN was just wrong, this is what it really is:
uint7 power_rating_pct      # Instant demand factor in percent
(percent of maximum power); range 0% to 127%.

src/drivers/driver_framework_wrapper/df_bebop_bus_wrapper/df_bebop_bus_wrapper.cpp

@@ -219,7 +219,6 @@ int DfBebopBusWrapper::_publish(struct bebop_state_data &data)
 	for (int i = 0; i < 4; i++) {
 		esc_status.esc[_esc_map[i]].timestamp = esc_status.timestamp;
 		esc_status.esc[_esc_map[i]].esc_rpm = data.rpm[i];
-		esc_status.esc[_esc_map[i]].esc_setpoint_raw = esc_speed_setpoint_rpm[i];
 	}
 
 	// TODO: when is this ever blocked?

src/drivers/mkblctrl/mkblctrl.cpp

@@ -617,16 +617,6 @@ MK::task_main()
 				esc.esc[i].esc_voltage = 0.0F;
 				esc.esc[i].esc_current = static_cast<float>(Motor[i].Current) * 0.1F;
 				esc.esc[i].esc_rpm = (uint16_t) 0;
-				esc.esc[i].esc_setpoint = (float) Motor[i].SetPoint_PX4;
-
-				if (Motor[i].Version == 1) {
-					// BLCtrl 2.0 (11Bit)
-					esc.esc[i].esc_setpoint_raw = (uint16_t)(Motor[i].SetPoint << 3) | Motor[i].SetPointLowerBits;
-
-				} else {
-					// BLCtrl < 2.0 (8Bit)
-					esc.esc[i].esc_setpoint_raw = (uint16_t) Motor[i].SetPoint;
-				}
 
 				esc.esc[i].esc_temperature = static_cast<uint8_t>(Motor[i].Temperature);
 				esc.esc[i].esc_state = (uint8_t) Motor[i].State;

src/drivers/uavcan/actuators/esc.cpp

@@ -129,7 +129,6 @@ UavcanEscController::update_outputs(float *outputs, unsigned num_outputs)
 
 			msg.cmd.push_back(static_cast<int>(scaled));
 
-			_esc_status.esc[i].esc_setpoint_raw = abs(static_cast<int>(scaled));
 			actuator_outputs.output[i] = scaled;
 
 		} else {
@@ -201,7 +200,6 @@ UavcanEscController::esc_status_sub_cb(const uavcan::ReceivedDataStructure<uavca
 		ref.esc_voltage     = msg.voltage;
 		ref.esc_current     = msg.current;
 		ref.esc_temperature = msg.temperature;
-		ref.esc_setpoint    = msg.power_rating_pct;
 		ref.esc_rpm         = msg.rpm;
 		ref.esc_errorcount  = msg.error_count;
 	}