New Crowdin translations - zh-CN (#26553)

Co-authored-by: Crowdin Bot <support+bot@crowdin.com>

docs/zh/flight_controller/pixhawk5x.md

@@ -113,7 +113,7 @@ The Pixhawk® 5X is perfect for developers at corporate research labs, startups,
 - 其它特性:
   - Operating & storage temperature: -40 ~ 85°c
 
-## 购买渠道
+## Where to Buy {#store}
 
 Order from [Holybro](https://holybro.com/products/pixhawk-5x).
 
@@ -131,10 +131,10 @@ The [Pixhawk 5X Wiring Quick Start](../assembly/quick_start_pixhawk5x.md) provid
 
 :::info
 Connector pin assignments are left to right (i.e. Pin 1 is the left-most pin).
-::: infos:
+:::
 
 - The [camera capture pin](../camera/fc_connected_camera.md#camera-capture-configuration) (`PI0`) is pin 2 on the AD&IO port, marked above as `FMU_CAP1`.
-- _Pixhawk 5X_ pinouts can be downloaded in PDF from from [here](https://github.com/PX4/PX4-user_guide/blob/main/assets/flight_controller/pixhawk5x/pixhawk5x_pinout.pdf) or [here](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Holybro_Pixhawk5X_Pinout.pdf).
+- _Pixhawk 5X_ pinouts can be downloaded in PDF from [here](https://github.com/PX4/PX4-user_guide/blob/main/assets/flight_controller/pixhawk5x/pixhawk5x_pinout.pdf) or [here](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Holybro_Pixhawk5X_Pinout.pdf).
 
 ## 串口映射
 
@@ -177,7 +177,7 @@ Under these conditions the system will not draw any power (will not be operation
 
 Digital I2C battery monitoring is enabled by default (see [Quickstart > Power](../assembly/quick_start_pixhawk5x.md#power)).
 
-::: info
+:::info
 Analog battery monitoring via an ADC is not supported on this particular board, but may be supported in variations of this flight controller with a different baseboard.
 :::
 
@@ -190,13 +190,11 @@ It is pre-built and automatically installed by _QGroundControl_ when appropriate
 
 To [build PX4](../dev_setup/building_px4.md) for this target:
 
-```
+```sh
 make px4_fmu-v5x_default
 ```
 
-<a id="debug_port"></a>
-
-## 调试接口
+## Debug Port {#debug_port}
 
 The [PX4 System Console](../debug/system_console.md) and [SWD interface](../debug/swd_debug.md) run on the **FMU Debug** port.