fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-07-14 02:50:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into paul_estimator

Browse Source
This commit is contained in:
Lorenz Meier
2014-01-13 08:34:21 +01:00
parent 8a37633d2d f595b204ea
commit 605ca6cc8a
6 changed files with 288 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/modules/fw_pos_control_l1/fw_pos_control_l1_params.c
+60 -7
View File
@@ -1,7 +1,6 @@
/****************************************************************************
*
* Copyright (c) 2013 PX4 Development Team. All rights reserved.
* Author: Lorenz Meier <lm@inf.ethz.ch>
* Copyright (c) 2013, 2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -49,21 +48,75 @@
*
*/
/**
* L1 period
*
* This is the L1 distance and defines the tracking
* point ahead of the aircraft its following.
* A value of 25 meters works for most aircraft. Shorten
* slowly during tuning until response is sharp without oscillation.
*
* @min 1.0
* @max 100.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_L1_PERIOD, 25.0f);
/**
* L1 damping
*
* Damping factor for L1 control.
*
* @min 0.6
* @max 0.9
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_L1_DAMPING, 0.75f);
/**
* Default Loiter Radius
*
* This radius is used when no other loiter radius is set.
*
* @min 10.0
* @max 100.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_LOITER_R, 50.0f);
/**
* Cruise throttle
*
* This is the throttle setting required to achieve the desired cruise speed. Most airframes have a value of 0.5-0.7.
*
* @min 0.0
* @max 1.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_THR_CRUISE, 0.7f);
/**
* Negative pitch limit
*
* The minimum negative pitch the controller will output.
*
* @unit degrees
* @min -60.0
* @max 0.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_P_LIM_MIN, -45.0f);
/**
* Positive pitch limit
*
* The maximum positive pitch the controller will output.
*
* @unit degrees
* @min 0.0
* @max 60.0
* @group L1 Control
*/
PARAM_DEFINE_FLOAT(FW_P_LIM_MAX, 45.0f);
src/modules/sensors/module.mk
+1 -1
View File
@@ -1,6 +1,6 @@
############################################################################
#
# Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
# Copyright (c) 2012-2014 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
src/modules/sensors/sensor_params.c
+171 -15
View File
@@ -1,9 +1,6 @@
/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
* Author: @author Lorenz Meier <lm@inf.ethz.ch>
* @author Thomas Gubler <thomasgubler@student.ethz.ch>
* @author Julian Oes <joes@student.ethz.ch>
* Copyright (c) 2012-2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -38,6 +35,10 @@
* @file sensor_params.c
*
* Parameters defined by the sensors task.
*
* @author Lorenz Meier <lm@inf.ethz.ch>
* @author Julian Oes <joes@student.ethz.ch>
* @author Thomas Gubler <thomasgubler@student.ethz.ch>
*/
#include <nuttx/config.h>
@@ -45,41 +46,98 @@
#include <systemlib/param/param.h>
/**
* Gyro X offset FIXME
* Gyro X offset
*
* This is an X-axis offset for the gyro.
* Adjust it according to the calibration data.
* This is an X-axis offset for the gyro. Adjust it according to the calibration data.
*
* @min -10.0
* @max 10.0
* @group Gyro Config
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_GYRO_XOFF, 0.0f);
/**
* Gyro Y offset FIXME with dot.
* Gyro Y offset
*
* @min -10.0
* @max 10.0
* @group Gyro Config
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_GYRO_YOFF, 0.0f);
/**
* Gyro Z offset FIXME
* Gyro Z offset
*
* @min -5.0
* @max 5.0
* @group Gyro Config
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_GYRO_ZOFF, 0.0f);
/**
* Gyro X scaling
*
* X-axis scaling.
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_GYRO_XSCALE, 1.0f);
/**
* Gyro Y scaling
*
* Y-axis scaling.
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_GYRO_YSCALE, 1.0f);
/**
* Gyro Z scaling
*
* Z-axis scaling.
*
* @min -1.5
* @max 1.5
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_GYRO_ZSCALE, 1.0f);
/**
* Magnetometer X offset
*
* This is an X-axis offset for the magnetometer.
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_MAG_XOFF, 0.0f);
/**
* Magnetometer Y offset
*
* This is an Y-axis offset for the magnetometer.
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_MAG_YOFF, 0.0f);
/**
* Magnetometer Z offset
*
* This is an Z-axis offset for the magnetometer.
*
* @min -500.0
* @max 500.0
* @group Sensor Calibration
*/
PARAM_DEFINE_FLOAT(SENS_MAG_ZOFF, 0.0f);
PARAM_DEFINE_FLOAT(SENS_MAG_XSCALE, 1.0f);
@@ -100,16 +158,114 @@ PARAM_DEFINE_INT32(SENS_DPRES_ANA, 0);
PARAM_DEFINE_INT32(SENS_BOARD_ROT, 0);
PARAM_DEFINE_INT32(SENS_EXT_MAG_ROT, 0);
/**
* RC Channel 1 Minimum
*
* Minimum value for RC channel 1
*
* @min 800.0
* @max 1500.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC1_MIN, 1000.0f);
/**
* RC Channel 1 Trim
*
* Mid point value (same as min for throttle)
*
* @min 800.0
* @max 2200.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC1_TRIM, 1500.0f);
/**
* RC Channel 1 Maximum
*
* Maximum value for RC channel 1
*
* @min 1500.0
* @max 2200.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC1_MAX, 2000.0f);
/**
* RC Channel 1 Reverse
*
* Set to -1 to reverse channel.
*
* @min -1.0
* @max 1.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC1_REV, 1.0f);
/**
* RC Channel 1 dead zone
*
* The +- range of this value around the trim value will be considered as zero.
*
* @min 0.0
* @max 100.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC1_DZ, 10.0f);
PARAM_DEFINE_FLOAT(RC2_MIN, 1000);
PARAM_DEFINE_FLOAT(RC2_TRIM, 1500);
PARAM_DEFINE_FLOAT(RC2_MAX, 2000);
/**
* RC Channel 2 Minimum
*
* Minimum value for RC channel 2
*
* @min 800.0
* @max 1500.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC2_MIN, 1000.0f);
/**
* RC Channel 2 Trim
*
* Mid point value (same as min for throttle)
*
* @min 800.0
* @max 2200.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC2_TRIM, 1500.0f);
/**
* RC Channel 2 Maximum
*
* Maximum value for RC channel 2
*
* @min 1500.0
* @max 2200.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC2_MAX, 2000.0f);
/**
* RC Channel 2 Reverse
*
* Set to -1 to reverse channel.
*
* @min -1.0
* @max 1.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC2_REV, 1.0f);
/**
* RC Channel 2 dead zone
*
* The +- range of this value around the trim value will be considered as zero.
*
* @min 0.0
* @max 100.0
* @group Radio Calibration
*/
PARAM_DEFINE_FLOAT(RC2_DZ, 10.0f);
PARAM_DEFINE_FLOAT(RC3_MIN, 1000);
src/systemcmds/tests/test_file.c
+9 -7
View File
@@ -54,9 +54,9 @@
#include "tests.h"
int check_user_abort();
int check_user_abort(int fd);
int check_user_abort() {
int check_user_abort(int fd) {
/* check if user wants to abort */
char c;
@@ -77,6 +77,8 @@ int check_user_abort() {
case 'q':
{
warnx("Test aborted.");
fsync(fd);
close(fd);
return OK;
/* not reached */
}
@@ -141,7 +143,7 @@ test_file(int argc, char *argv[])
fsync(fd);
if (!check_user_abort())
if (!check_user_abort(fd))
return OK;
}
@@ -175,7 +177,7 @@ test_file(int argc, char *argv[])
return 1;
}
if (!check_user_abort())
if (!check_user_abort(fd))
return OK;
}
@@ -199,7 +201,7 @@ test_file(int argc, char *argv[])
return 1;
}
if (!check_user_abort())
if (!check_user_abort(fd))
return OK;
}
@@ -232,7 +234,7 @@ test_file(int argc, char *argv[])
break;
}
if (!check_user_abort())
if (!check_user_abort(fd))
return OK;
}
@@ -275,7 +277,7 @@ test_file(int argc, char *argv[])
break;
}
if (!check_user_abort())
if (!check_user_abort(fd))
return OK;
}