Merge branch 'master' of https://github.com/PX4/Firmware into fw_control

This commit is contained in:
Thomas Gubler
2012-11-13 20:26:27 +01:00
13 changed files with 335 additions and 187 deletions
-1
View File
@@ -149,7 +149,6 @@ static void led_deinit(void);
static int led_toggle(int led);
static int led_on(int led);
static int led_off(int led);
static int pm_save_eeprom(bool only_unsaved);
static void do_gyro_calibration(int status_pub, struct vehicle_status_s *status);
static void do_mag_calibration(int status_pub, struct vehicle_status_s *status);
static void do_accel_calibration(int status_pub, struct vehicle_status_s *status);
+2
View File
@@ -579,6 +579,8 @@ uint8_t update_state_machine_mode_request(int status_pub, struct vehicle_status_
state_machine_publish(status_pub, current_status, mavlink_fd);
publish_armed_status(current_status);
printf("[commander] Enabling HIL, locking down all actuators for safety.\n\t(Arming the system will not activate them while in HIL mode)\n");
} else if (current_status->state_machine != SYSTEM_STATE_STANDBY) {
mavlink_log_critical(mavlink_fd, "[commander] REJECTING switch to HIL, not in standby.")
}
/* NEVER actually switch off HIL without reboot */
+3 -1
View File
@@ -474,6 +474,7 @@ HIL::ioctl(file *filp, int cmd, unsigned long arg)
ret = HIL::pwm_ioctl(filp, cmd, arg);
break;
default:
ret = -ENOTTY;
debug("not in a PWM mode");
break;
}
@@ -489,7 +490,7 @@ int
HIL::pwm_ioctl(file *filp, int cmd, unsigned long arg)
{
int ret = OK;
int channel;
// int channel;
lock();
@@ -824,6 +825,7 @@ hil_main(int argc, char *argv[])
// XXX all modes have PWM settings
if (argc > i + 1) {
pwm_update_rate_in_hz = atoi(argv[i + 1]);
printf("pwm update rate: %d Hz\n", pwm_update_rate_in_hz);
} else {
fprintf(stderr, "missing argument for pwm update rate (-u)\n");
return 1;
+1
View File
@@ -467,6 +467,7 @@ PX4IO::rx_callback(const uint8_t *buffer, size_t bytes_received)
/* publish raw rc channel values from IO */
_input_rc.timestamp = hrt_absolute_time();
_input_rc.channel_count = rep->channel_count;
for (int i = 0; i < rep->channel_count; i++)
{
_input_rc.values[i] = rep->rc_channel[i];
+4 -3
View File
@@ -418,10 +418,11 @@ void *mtk_watchdog_loop(void *args)
mtk_gps->satellite_info_available = 0;
// global_data_send_subsystem_info(&mtk_present_enabled_healthy);
mavlink_log_info(mavlink_fd, "[gps] MTK custom binary module found, status ok\n");
mtk_healthy = true;
mtk_fail_count = 0;
once_ok = true;
}
mtk_healthy = true;
mtk_fail_count = 0;
once_ok = true;
}
usleep(MTK_WATCHDOG_WAIT_TIME_MICROSECONDS);
+6 -5
View File
@@ -272,7 +272,8 @@ int ubx_parse(uint8_t b, char *gps_rx_buffer)
ubx_gps->timestamp = hrt_absolute_time();
ubx_gps->counter++;
ubx_gps->s_variance = packet->sAcc;
ubx_gps->p_variance = packet->pAcc;
//pthread_mutex_lock(ubx_mutex);
ubx_state->last_message_timestamps[NAV_SOL - 1] = hrt_absolute_time();
@@ -785,10 +786,6 @@ void *ubx_watchdog_loop(void *args)
sleep(1);
} else {
/* gps healthy */
ubx_success_count++;
ubx_healthy = true;
ubx_fail_count = 0;
if (!ubx_healthy && ubx_success_count == UBX_HEALTH_SUCCESS_COUNTER_LIMIT) {
//printf("[gps] ublox UBX module status ok (baud=%d)\r\n", current_gps_speed);
@@ -799,6 +796,10 @@ void *ubx_watchdog_loop(void *args)
once_ok = true;
}
/* gps healthy */
ubx_success_count++;
ubx_healthy = true;
ubx_fail_count = 0;
}
usleep(UBX_WATCHDOG_WAIT_TIME_MICROSECONDS);
+2 -2
View File
@@ -163,8 +163,8 @@ set_hil_on_off(bool hil_enabled)
/* 20 Hz */
hil_rate_interval = 50;
} else {
/* 100 Hz */
hil_rate_interval = 10;
/* 200 Hz */
hil_rate_interval = 5;
}
orb_set_interval(mavlink_subs.spa_sub, hil_rate_interval);
+22 -17
View File
@@ -488,23 +488,25 @@ int sdlog_thread_main(int argc, char *argv[]) {
orb_copy(ORB_ID(vehicle_gps_position), subs.gps_pos_sub, &buf.gps_pos);
orb_copy(ORB_ID(vehicle_local_position), subs.local_pos_sub, &buf.local_pos);
orb_copy(ORB_ID(vehicle_global_position), subs.global_pos_sub, &buf.global_pos);
orb_copy(ORB_ID(vehicle_attitude), subs.att_sub, &buf.att);
#pragma pack(push, 1)
struct {
uint64_t timestamp;
float gyro[3];
float accel[3];
float mag[3];
float baro;
float baro_alt;
float baro_temp;
float control[4];
float actuators[8];
float vbat;
float adc[3];
float local_pos[3];
int32_t gps_pos[3];
uint64_t timestamp; //[us]
float gyro[3]; //[rad/s]
float accel[3]; //[m/s^2]
float mag[3]; //[gauss]
float baro; //pressure [millibar]
float baro_alt; //altitude above MSL [meter]
float baro_temp; //[degree celcius]
float control[4]; //roll, pitch, yaw [-1..1], thrust [0..1]
float actuators[8]; //motor 1-8, in motor units (PWM: 1000-2000,AR.Drone: 0-512)
float vbat; //battery voltage in [volt]
float adc[3]; //remaining auxiliary ADC ports [volt]
float local_position[3]; //tangent plane mapping into x,y,z [m]
int32_t gps_raw_position[3]; //latitude [degrees] north, longitude [degrees] east, altitude above MSL [millimeter]
float attitude[3]; //pitch, roll, yaw [rad]
float rotMatrix[9]; //unitvectors
} sysvector = {
.timestamp = buf.raw.timestamp,
.gyro = {buf.raw.gyro_rad_s[0], buf.raw.gyro_rad_s[1], buf.raw.gyro_rad_s[2]},
@@ -518,14 +520,16 @@ int sdlog_thread_main(int argc, char *argv[]) {
buf.act_outputs.output[4], buf.act_outputs.output[5], buf.act_outputs.output[6], buf.act_outputs.output[7]},
.vbat = buf.raw.battery_voltage_v,
.adc = {buf.raw.adc_voltage_v[0], buf.raw.adc_voltage_v[1], buf.raw.adc_voltage_v[2]},
.local_pos = {buf.local_pos.x, buf.local_pos.y, buf.local_pos.z},
.gps_pos = {buf.gps_pos.lat, buf.gps_pos.lon, buf.gps_pos.alt}
.local_position = {buf.local_pos.x, buf.local_pos.y, buf.local_pos.z},
.gps_raw_position = {buf.gps_pos.lat, buf.gps_pos.lon, buf.gps_pos.alt},
.attitude = {buf.att.pitch, buf.att.roll, buf.att.yaw},
.rotMatrix = {buf.att.R[0][0], buf.att.R[0][1], buf.att.R[0][2], buf.att.R[1][0], buf.att.R[1][1], buf.att.R[1][2], buf.att.R[2][0], buf.att.R[2][1], buf.att.R[2][2]}
};
#pragma pack(pop)
sysvector_bytes += write(sysvector_file, (const char*)&sysvector, sizeof(sysvector));
usleep(10000);
usleep(10000); //10000 corresponds in reality to ca. 76 Hz
}
fsync(sysvector_file);
@@ -602,3 +606,4 @@ int file_copy(const char* file_old, const char* file_new)
return ret;
}
+5 -1
View File
@@ -93,6 +93,8 @@
#define BAT_VOL_LOWPASS_2 0.01f
#define VOLTAGE_BATTERY_IGNORE_THRESHOLD_VOLTS 3.5f
#define PPM_INPUT_TIMEOUT_INTERVAL 50000 /**< 50 ms timeout / 20 Hz */
/**
* Sensor app start / stop handling function
*
@@ -865,8 +867,10 @@ Sensors::ppm_poll()
struct rc_input_values raw;
raw.timestamp = ppm_last_valid_decode;
/* we are accepting this message */
_ppm_last_valid = ppm_last_valid_decode;
if (ppm_decoded_channels > 1) {
if (ppm_decoded_channels > 2 && hrt_absolute_time() - _ppm_last_valid < PPM_INPUT_TIMEOUT_INTERVAL) {
for (int i = 0; i < ppm_decoded_channels; i++) {
raw.values[i] = ppm_buffer[i];
+65 -5
View File
@@ -73,6 +73,20 @@ struct perf_ctr_elapsed {
uint64_t time_most;
};
/**
* PC_INTERVAL counter.
*/
struct perf_ctr_interval {
struct perf_ctr_header hdr;
uint64_t event_count;
uint64_t time_event;
uint64_t time_first;
uint64_t time_last;
uint64_t time_least;
uint64_t time_most;
};
/**
* List of all known counters.
*/
@@ -93,6 +107,10 @@ perf_alloc(enum perf_counter_type type, const char *name)
ctr = (perf_counter_t)calloc(sizeof(struct perf_ctr_elapsed), 1);
break;
case PC_INTERVAL:
ctr = (perf_counter_t)calloc(sizeof(struct perf_ctr_interval), 1);
break;
default:
break;
}
@@ -127,6 +145,32 @@ perf_count(perf_counter_t handle)
((struct perf_ctr_count *)handle)->event_count++;
break;
case PC_INTERVAL: {
struct perf_ctr_interval *pci = (struct perf_ctr_interval *)handle;
hrt_abstime now = hrt_absolute_time();
switch (pci->event_count) {
case 0:
pci->time_first = now;
break;
case 1:
pci->time_least = now - pci->time_last;
pci->time_most = now - pci->time_last;
break;
default: {
hrt_abstime interval = now - pci->time_last;
if (interval < pci->time_least)
pci->time_least = interval;
if (interval > pci->time_most)
pci->time_most = interval;
break;
}
}
pci->time_last = now;
pci->event_count++;
break;
}
default:
break;
}
@@ -187,13 +231,29 @@ perf_print_counter(perf_counter_t handle)
((struct perf_ctr_count *)handle)->event_count);
break;
case PC_ELAPSED:
case PC_ELAPSED: {
struct perf_ctr_elapsed *pce = (struct perf_ctr_elapsed *)handle;
printf("%s: %llu events, %lluus elapsed, min %lluus max %lluus\n",
handle->name,
((struct perf_ctr_elapsed *)handle)->event_count,
((struct perf_ctr_elapsed *)handle)->time_total,
((struct perf_ctr_elapsed *)handle)->time_least,
((struct perf_ctr_elapsed *)handle)->time_most);
pce->event_count,
pce->time_total,
pce->time_least,
pce->time_most);
break;
}
case PC_INTERVAL: {
struct perf_ctr_interval *pci = (struct perf_ctr_interval *)handle;
printf("%s: %llu events, %llu avg, min %lluus max %lluus\n",
handle->name,
pci->event_count,
(pci->time_last - pci->time_first) / pci->event_count,
pci->time_least,
pci->time_most);
break;
}
default:
break;
+2 -1
View File
@@ -44,7 +44,8 @@
*/
enum perf_counter_type {
PC_COUNT, /**< count the number of times an event occurs */
PC_ELAPSED /**< measure the time elapsed performing an event */
PC_ELAPSED, /**< measure the time elapsed performing an event */
PC_INTERVAL /**< measure the interval between instances of an event */
};
struct perf_ctr_header;
+2
View File
@@ -65,6 +65,8 @@ struct vehicle_gps_position_s
uint16_t counter_pos_valid; /**< is only increased when new lat/lon/alt information was added */
uint16_t eph; /**< GPS HDOP horizontal dilution of position in cm (m*100). If unknown, set to: 65535 //LOGME */
uint16_t epv; /**< GPS VDOP horizontal dilution of position in cm (m*100). If unknown, set to: 65535 */
float s_variance; // XXX testing
float p_variance; // XXX testing
uint16_t vel; /**< GPS ground speed (m/s * 100). If unknown, set to: 65535 */
float vel_n; /**< GPS ground speed in m/s */
float vel_e; /**< GPS ground speed in m/s */