From 5a58f25d6a1fd253a8d9792443a0fe97880d6a01 Mon Sep 17 00:00:00 2001 From: Ryan Johnston <31726584+ryanjAA@users.noreply.github.com> Date: Sat, 13 Feb 2021 10:16:55 -0600 Subject: [PATCH] boards: MRO Control Zero F7 OEM Support --- boards/mro/ctrl-zero-f7-oem/default.cmake | 126 ++++++++ .../mro/ctrl-zero-f7-oem/firmware.prototype | 13 + .../ctrl-zero-f7-oem/init/rc.board_defaults | 19 ++ .../ctrl-zero-f7-oem/init/rc.board_mavlink | 7 + .../ctrl-zero-f7-oem/init/rc.board_sensors | 19 ++ .../nuttx-config/include/board.h | 300 ++++++++++++++++++ .../nuttx-config/include/board_dma_map.h | 98 ++++++ .../nuttx-config/nsh/defconfig | 237 ++++++++++++++ .../nuttx-config/scripts/script.ld | 181 +++++++++++ .../mro/ctrl-zero-f7-oem/src/CMakeLists.txt | 51 +++ .../mro/ctrl-zero-f7-oem/src/board_config.h | 241 ++++++++++++++ boards/mro/ctrl-zero-f7-oem/src/i2c.cpp | 40 +++ boards/mro/ctrl-zero-f7-oem/src/init.c | 250 +++++++++++++++ boards/mro/ctrl-zero-f7-oem/src/led.c | 103 ++++++ boards/mro/ctrl-zero-f7-oem/src/sdio.c | 171 ++++++++++ boards/mro/ctrl-zero-f7-oem/src/spi.cpp | 53 ++++ .../mro/ctrl-zero-f7-oem/src/timer_config.cpp | 54 ++++ boards/mro/ctrl-zero-f7-oem/src/usb.c | 105 ++++++ 18 files changed, 2068 insertions(+) create mode 100644 boards/mro/ctrl-zero-f7-oem/default.cmake create mode 100644 boards/mro/ctrl-zero-f7-oem/firmware.prototype create mode 100644 boards/mro/ctrl-zero-f7-oem/init/rc.board_defaults create mode 100644 boards/mro/ctrl-zero-f7-oem/init/rc.board_mavlink create mode 100644 boards/mro/ctrl-zero-f7-oem/init/rc.board_sensors create mode 100644 boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board.h create mode 100644 boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board_dma_map.h create mode 100644 boards/mro/ctrl-zero-f7-oem/nuttx-config/nsh/defconfig create mode 100644 boards/mro/ctrl-zero-f7-oem/nuttx-config/scripts/script.ld create mode 100644 boards/mro/ctrl-zero-f7-oem/src/CMakeLists.txt create mode 100644 boards/mro/ctrl-zero-f7-oem/src/board_config.h create mode 100644 boards/mro/ctrl-zero-f7-oem/src/i2c.cpp create mode 100644 boards/mro/ctrl-zero-f7-oem/src/init.c create mode 100644 boards/mro/ctrl-zero-f7-oem/src/led.c create mode 100644 boards/mro/ctrl-zero-f7-oem/src/sdio.c create mode 100644 boards/mro/ctrl-zero-f7-oem/src/spi.cpp create mode 100644 boards/mro/ctrl-zero-f7-oem/src/timer_config.cpp create mode 100644 boards/mro/ctrl-zero-f7-oem/src/usb.c diff --git a/boards/mro/ctrl-zero-f7-oem/default.cmake b/boards/mro/ctrl-zero-f7-oem/default.cmake new file mode 100644 index 0000000000..a3bcb9c124 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/default.cmake @@ -0,0 +1,126 @@ + +px4_add_board( + PLATFORM nuttx + VENDOR mro + MODEL ctrl-zero-f7-oem + LABEL default + TOOLCHAIN arm-none-eabi + ARCHITECTURE cortex-m7 + ROMFSROOT px4fmu_common + TESTING + UAVCAN_INTERFACES 2 + SERIAL_PORTS + TEL1:/dev/ttyS0 + TEL2:/dev/ttyS1 + GPS1:/dev/ttyS2 + #RC:/dev/ttyS3 + #CONSOLE:/dev/ttyS4 + #FRSKY:/dev/ttyS5 + DRIVERS + adc/board_adc + #barometer # all available barometer drivers + barometer/dps310 + batt_smbus + camera_capture + camera_trigger + differential_pressure # all available differential pressure drivers + distance_sensor # all available distance sensor drivers + #dshot + gps + #heater + #imu # all available imu drivers + imu/bosch/bmi088 + imu/invensense/icm20602 + imu/invensense/icm20948 + irlock + lights/blinkm + lights/rgbled + lights/rgbled_ncp5623c + magnetometer # all available magnetometer drivers + mkblctrl + #optical_flow # all available optical flow drivers + #osd + pca9685 + power_monitor/ina226 + #protocol_splitter + #pwm_input + pwm_out_sim + pwm_out + rc_input + roboclaw + safety_button + tap_esc + telemetry # all available telemetry drivers + test_ppm + tone_alarm + uavcan + MODULES + airspeed_selector + attitude_estimator_q + battery_status + camera_feedback + commander + dataman + ekf2 + events + flight_mode_manager + fw_att_control + fw_pos_control_l1 + land_detector + landing_target_estimator + load_mon + local_position_estimator + logger + mavlink + mc_att_control + mc_hover_thrust_estimator + mc_pos_control + mc_rate_control + #micrortps_bridge + navigator + rc_update + rover_pos_control + sensors + sih + temperature_compensation + vmount + vtol_att_control + SYSTEMCMDS + bl_update + dmesg + dumpfile + esc_calib + hardfault_log + i2cdetect + led_control + mft + mixer + motor_ramp + motor_test + mtd + nshterm + param + perf + pwm + reboot + reflect + sd_bench + system_time + tests # tests and test runner + top + topic_listener + tune_control + usb_connected + ver + work_queue + EXAMPLES + fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control + hello + hwtest # Hardware test + #matlab_csv_serial + px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html + px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html + rover_steering_control # Rover example app + uuv_example_app + work_item + ) diff --git a/boards/mro/ctrl-zero-f7-oem/firmware.prototype b/boards/mro/ctrl-zero-f7-oem/firmware.prototype new file mode 100644 index 0000000000..eb7d32c3b4 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/firmware.prototype @@ -0,0 +1,13 @@ +{ + "board_id": 141, + "magic": "mRo-ctrl-zero-f7-oem", + "description": "Firmware for the mRo-ctrl-zero-f7-oem board", + "image": "", + "build_time": 0, + "summary": "mRo-ctrl-zero-f7-oem", + "version": "0.1", + "image_size": 0, + "image_maxsize": 2064384, + "git_identity": "", + "board_revision": 0 +} diff --git a/boards/mro/ctrl-zero-f7-oem/init/rc.board_defaults b/boards/mro/ctrl-zero-f7-oem/init/rc.board_defaults new file mode 100644 index 0000000000..73371f9d92 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/init/rc.board_defaults @@ -0,0 +1,19 @@ +#!/bin/sh +# +# mRo Control Zero specific board defaults +#------------------------------------------------------------------------------ + + +if [ $AUTOCNF = yes ] +then + # Multi-EKF + param set EKF2_MULTI_IMU 3 + param set SENS_IMU_MODE 0 + + param set UAVCAN_ENABLE 2 +fi + +set LOGGER_BUF 64 +set MIXER_AUX none + +safety_button start diff --git a/boards/mro/ctrl-zero-f7-oem/init/rc.board_mavlink b/boards/mro/ctrl-zero-f7-oem/init/rc.board_mavlink new file mode 100644 index 0000000000..9a4a80a6d3 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/init/rc.board_mavlink @@ -0,0 +1,7 @@ +#!/bin/sh +# +# mRo Control Zero specific board MAVLink startup script. +#------------------------------------------------------------------------------ + +# Start MAVLink on the USB port +mavlink start -d /dev/ttyACM0 diff --git a/boards/mro/ctrl-zero-f7-oem/init/rc.board_sensors b/boards/mro/ctrl-zero-f7-oem/init/rc.board_sensors new file mode 100644 index 0000000000..88205f4ec8 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/init/rc.board_sensors @@ -0,0 +1,19 @@ +#!/bin/sh +# +# mRo Control Zero specific board sensors init +#------------------------------------------------------------------------------ + +board_adc start + +# Internal ICM-20602 +icm20602 -s -b 1 -R 8 start + +# Internal SPI bus BMI088 accel & gyro +bmi088 -A -s -b 5 -R 8 start +bmi088 -G -s -b 5 -R 8 start + +# Internal ICM-20948 (with magnetometer) +icm20948 -s -b 1 -R 8 -M start + +# Interal DPS310 (barometer) +dps310 -s -b 2 start diff --git a/boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board.h b/boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board.h new file mode 100644 index 0000000000..51260395e5 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board.h @@ -0,0 +1,300 @@ +/************************************************************************************ + * board.h + * + * Copyright (C) 2016-2018 Gregory Nutt. All rights reserved. + * Authors: David Sidrane + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#pragma once + +/************************************************************************************ + * Included Files + ************************************************************************************/ +#include "board_dma_map.h" + +#include + +#ifndef __ASSEMBLY__ +# include +#endif + +#include "stm32_rcc.h" +#include "stm32_sdmmc.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ +/* The mRo Control Zero F7 OEM board provides the following clock sources: + * + * 24 MHz crystal for HSE + * + * So we have these clock source available within the STM32 + * + * HSI: 16 MHz RC factory-trimmed + * HSE: 24 MHz crystal for HSE + */ +#define STM32_BOARD_XTAL 24000000ul + +#define STM32_HSI_FREQUENCY 16000000ul +#define STM32_LSI_FREQUENCY 32000 +#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL +#define STM32_LSE_FREQUENCY 0 + +/* Main PLL Configuration. + * + * PLL source is HSE = 24,000,000 + * + * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN + * Subject to: + * + * 2 <= PLLM <= 63 + * 192 <= PLLN <= 432 + * 192 MHz <= PLL_VCO <= 432MHz + * + * SYSCLK = PLL_VCO / PLLP + * Subject to + * + * PLLP = {2, 4, 6, 8} + * SYSCLK <= 216 MHz + * + * SDMMC and RNG Clock = PLL_VCO / PLLQ + * Subject to + * The SDMMC and the random number generator need a frequency lower than or equal + * to 48 MHz to work correctly. + * + * 2 <= PLLQ <= 15 + */ + +/* SDMMCCLK (= USB OTG FS clock = RNGCLK) should be <= 48MHz + * + * PLL_VCO = (16,000,000 / 24) * 432 = 432 MHz + * SYSCLK = 432 MHz / 2 = 216 MHz + * SDMMC and RNG Clock = 432 MHz / 9 = 48 MHz + */ +#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(24) +#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(432) +#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2 +#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(9) + +#define STM32_VCO_FREQUENCY ((STM32_HSE_FREQUENCY / 24) * 432) +#define STM32_SYSCLK_FREQUENCY (STM32_VCO_FREQUENCY / 2) +#define STM32_OTGFS_FREQUENCY (STM32_VCO_FREQUENCY / 9) + +/* Configure factors for PLLSAI clock */ +#define CONFIG_STM32F7_PLLSAI 1 +#define STM32_RCC_PLLSAICFGR_PLLSAIN RCC_PLLSAICFGR_PLLSAIN(192) +#define STM32_RCC_PLLSAICFGR_PLLSAIP RCC_PLLSAICFGR_PLLSAIP(8) +#define STM32_RCC_PLLSAICFGR_PLLSAIQ RCC_PLLSAICFGR_PLLSAIQ(4) +#define STM32_RCC_PLLSAICFGR_PLLSAIR RCC_PLLSAICFGR_PLLSAIR(2) + +/* Configure Dedicated Clock Configuration Register */ +#define STM32_RCC_DCKCFGR1_PLLI2SDIVQ RCC_DCKCFGR1_PLLI2SDIVQ(1) +#define STM32_RCC_DCKCFGR1_PLLSAIDIVQ RCC_DCKCFGR1_PLLSAIDIVQ(1) +#define STM32_RCC_DCKCFGR1_PLLSAIDIVR RCC_DCKCFGR1_PLLSAIDIVR(0) +#define STM32_RCC_DCKCFGR1_SAI1SRC RCC_DCKCFGR1_SAI1SEL(0) +#define STM32_RCC_DCKCFGR1_SAI2SRC RCC_DCKCFGR1_SAI2SEL(0) +#define STM32_RCC_DCKCFGR1_TIMPRESRC 0 +#define STM32_RCC_DCKCFGR1_DFSDM1SRC 0 +#define STM32_RCC_DCKCFGR1_ADFSDM1SRC 0 + +/* Configure factors for PLLI2S clock */ +#define CONFIG_STM32F7_PLLI2S 1 +#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192) +#define STM32_RCC_PLLI2SCFGR_PLLI2SP RCC_PLLI2SCFGR_PLLI2SP(2) +#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2) +#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2) + +/* Configure Dedicated Clock Configuration Register 2 */ +#define STM32_RCC_DCKCFGR2_USART1SRC RCC_DCKCFGR2_USART1SEL_APB +#define STM32_RCC_DCKCFGR2_USART2SRC RCC_DCKCFGR2_USART2SEL_APB +#define STM32_RCC_DCKCFGR2_UART4SRC RCC_DCKCFGR2_UART4SEL_APB +#define STM32_RCC_DCKCFGR2_UART5SRC RCC_DCKCFGR2_UART5SEL_APB +#define STM32_RCC_DCKCFGR2_USART6SRC RCC_DCKCFGR2_USART6SEL_APB +#define STM32_RCC_DCKCFGR2_UART7SRC RCC_DCKCFGR2_UART7SEL_APB +#define STM32_RCC_DCKCFGR2_UART8SRC RCC_DCKCFGR2_UART8SEL_APB +#define STM32_RCC_DCKCFGR2_I2C1SRC RCC_DCKCFGR2_I2C1SEL_HSI +#define STM32_RCC_DCKCFGR2_I2C2SRC RCC_DCKCFGR2_I2C2SEL_HSI +#define STM32_RCC_DCKCFGR2_I2C3SRC RCC_DCKCFGR2_I2C3SEL_HSI +#define STM32_RCC_DCKCFGR2_I2C4SRC RCC_DCKCFGR2_I2C4SEL_HSI +#define STM32_RCC_DCKCFGR2_LPTIM1SRC RCC_DCKCFGR2_LPTIM1SEL_APB +#define STM32_RCC_DCKCFGR2_CECSRC RCC_DCKCFGR2_CECSEL_HSI +#define STM32_RCC_DCKCFGR2_CK48MSRC RCC_DCKCFGR2_CK48MSEL_PLL +#define STM32_RCC_DCKCFGR2_SDMMCSRC RCC_DCKCFGR2_SDMMCSEL_48MHZ +#define STM32_RCC_DCKCFGR2_SDMMC2SRC RCC_DCKCFGR2_SDMMC2SEL_48MHZ +#define STM32_RCC_DCKCFGR2_DSISRC RCC_DCKCFGR2_DSISEL_PHY + + +/* Several prescalers allow the configuration of the two AHB buses, the + * high-speed APB (APB2) and the low-speed APB (APB1) domains. The maximum + * frequency of the two AHB buses is 216 MHz while the maximum frequency of + * the high-speed APB domains is 108 MHz. The maximum allowed frequency of + * the low-speed APB domain is 54 MHz. + */ + +/* AHB clock (HCLK) is SYSCLK (216 MHz) */ +#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ +#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY +#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ + +/* APB1 clock (PCLK1) is HCLK/4 (54 MHz) */ +#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */ +#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4) + +/* Timers driven from APB1 will be twice PCLK1 */ +#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY) + +/* APB2 clock (PCLK2) is HCLK/2 (108MHz) */ +#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */ +#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +/* Timers driven from APB2 will be twice PCLK2 */ +#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY) + +/* SDMMC dividers. Note that slower clocking is required when DMA is disabled + * in order to avoid RX overrun/TX underrun errors due to delayed responses + * to service FIFOs in interrupt driven mode. These values have not been + * tuned!!! + * + * SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(118+2)=400 KHz + */ + +/* Use the Falling edge of the SDIO_CLK clock to change the edge the + * data and commands are change on + */ +#define STM32_SDMMC_CLKCR_EDGE STM32_SDMMC_CLKCR_NEGEDGE + +#define STM32_SDMMC_INIT_CLKDIV (118 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) + +/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz + * DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz + */ + +#ifdef CONFIG_STM32F7_SDMMC_DMA +# define STM32_SDMMC_MMCXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#else +# define STM32_SDMMC_MMCXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#endif + +/* DMA ON: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(1+2)=16 MHz + * DMA OFF: SDMMCCLK=48MHz, SDMMC_CK=SDMMCCLK/(2+2)=12 MHz + */ +#ifdef CONFIG_STM32F7_SDMMC_DMA +# define STM32_SDMMC_SDXFR_CLKDIV (1 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#else +# define STM32_SDMMC_SDXFR_CLKDIV (2 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT) +#endif + +/* FLASH wait states + * + * --------- ---------- ----------- + * VDD MAX SYSCLK WAIT STATES + * --------- ---------- ----------- + * 1.7-2.1 V 180 MHz 8 + * 2.1-2.4 V 216 MHz 9 + * 2.4-2.7 V 216 MHz 8 + * 2.7-3.6 V 216 MHz 7 + * --------- ---------- ----------- + */ + +#define BOARD_FLASH_WAITSTATES 7 + + +/* UART/USART */ +#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */ +#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */ +#define GPIO_USART2_RTS GPIO_USART2_RTS_2 /* PD4 */ +#define GPIO_USART2_CTS GPIO_USART2_CTS_2 /* PD3 */ + +#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */ +#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */ +#define GPIO_USART3_RTS GPIO_USART3_RTS_2 /* PD12 */ +#define GPIO_USART3_CTS GPIO_USART3_CTS_2 /* PD11 */ + +#define GPIO_UART4_RX GPIO_UART4_RX_1 /* PA1 */ +#define GPIO_UART4_TX GPIO_UART4_TX_1 /* PA0 */ + +#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */ +#define GPIO_USART6_TX GPIO_USART6_TX_2 /* PG14 */ + +#define GPIO_UART7_RX GPIO_UART7_RX_1 /* PE7 */ +#define GPIO_UART7_TX GPIO_UART7_TX_1 /* PE8 */ + +/* USART8: has no remap + * + * GPIO_UART8_RX PE0 + * GPIO_UART8_TX PE1 + */ + + +/* CAN */ +#define GPIO_CAN1_RX GPIO_CAN1_RX_3 /* PD0 */ +#define GPIO_CAN1_TX GPIO_CAN1_TX_3 /* PD1 */ +#define GPIO_CAN2_RX GPIO_CAN2_RX_1 /* PB12 */ +#define GPIO_CAN2_TX GPIO_CAN2_TX_1 /* PB13 */ + + +/* SPI */ +#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 /* PA5 */ +#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */ +#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 /* PA7 */ + +#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2 /* PB10 */ +#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1 /* PB14 */ +#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1 /* PB15 */ + +#define GPIO_SPI5_SCK GPIO_SPI5_SCK_1 /* PF7 */ +#define GPIO_SPI5_MISO GPIO_SPI5_MISO_1 /* PF8 */ +#define GPIO_SPI5_MOSI GPIO_SPI5_MOSI_1 /* PF9 */ + + +/* I2C */ +#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2 /* PB8 */ +#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2 /* PB9 */ + +#define GPIO_I2C3_SCL GPIO_I2C3_SCL_2 /* PH7 */ +#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2 /* PH8 */ + +#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2 /* PF14 */ +#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2 /* PF15 */ diff --git a/boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board_dma_map.h b/boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board_dma_map.h new file mode 100644 index 0000000000..c3df4fe607 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/nuttx-config/include/board_dma_map.h @@ -0,0 +1,98 @@ +/**************************************************************************** + * + * Copyright (c) 2020 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#pragma once + +/* +| DMA1 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 | +|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------| +| Channel 0 | SPI3_RX_1 | SPDIFRX_DT | SPI3_RX_2 | SPI2_RX | SPI2_TX | SPI3_TX_1 | SPDIFRX_CS | SPI3_TX_2 | +| Channel 1 | I2C1_RX | I2C3_RX | TIM7_UP_1 | - | TIM7_UP_2 | I2C1_RX_1 | I2C1_TX | I2C1_TX_1 | +| Channel 2 | TIM4_CH1 | - | I2C4_RX | TIM4_CH2 | - | I2C4_RX | TIM4_UP | TIM4_CH3 | +| Channel 3 | - | TIM2_UP_1 | I2C3_RX_1 | - | I2C3_TX | TIM2_CH1 | TIM2_CH2 | TIM2_UP_2 | +| | | TIM2_CH3 | | | | | TIM2_CH4_1 | TIM2_CH4_2 | +| Channel 4 | UART5_RX | USART3_RX | UART4_RX | USART3_TX_1 | UART4_TX | USART2_RX | USART2_TX | UART5_TX | +| Channel 5 | UART8_TX | UART7_TX | TIM3_CH4 | UART7_RX | TIM3_CH1 | TIM3_CH2 | UART8_RX | TIM3_CH3 | +| | | | TIM3_UP | | TIM3_TRIG | | | | +| Channel 6 | TIM5_CH3 | TIM5_CH4_1 | TIM5_CH1 | TIM5_CH4_2 | TIM5_CH2 | - | TIM5_UP_2 | - | +| | TIM5_UP_1 | TIM5_TRIG_1 | | TIM5_TRIG_2 | | | | | +| Channel 7 | - | TIM6_UP | I2C2_RX | I2C2_RX_1 | USART3_TX_2 | DAC1 | DAC2 | I2C2_TX | +| Channel 8 | I2C3_TX | I2C4_RX | - | - | I2C2_TX | - | I2C4_TX | - | +| Channel 9 | - | SPI2_RX | - | - | - | - | SPI2_TX | - | +| | | | | | | | | | +| Usage | | USART3_RX | UART4_RX | USART3_TX_1 | | USART2_RX | | | + + +| DMA2 | Stream 0 | Stream 1 | Stream 2 | Stream 3 | Stream 4 | Stream 5 | Stream 6 | Stream 7 | +|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------| +| Channel 0 | ADC1_1 | SAI1_A | TIM8_CH1_1 | SAI1_A_1 | ADC1_2 | SAI1_B_1 | TIM1_CH1_1 | SAI2_B_2 | +| | | | TIM8_CH2_1 | | | | TIM1_CH2_1 | | +| | | | TIM8_CH3_1 | | | | TIM1_CH3_1 | | +| Channel 1 | - | DCMI_1 | ADC2_1 | ADC2_2 | SAI1_B | SPI6_TX | SPI6_RX | DCMI_2 | +| Channel 2 | ADC3_1 | ADC3_2 | - | SPI5_RX_1 | SPI5_TX_1 | CRYP_OUT | CRYP_IN | HASH_IN | +| Channel 3 | SPI1_RX_1 | - | SPI1_RX_2 | SPI1_TX_1 | SAI2_A | SPI1_TX_2 | SAI2_B | QUADSPI | +| Channel 4 | SPI4_RX_1 | SPI4_TX_1 | USART1_RX_1 | SDMMC1_1 | - | USART1_RX_2 | SDMMC1_2 | USART1_TX | +| Channel 5 | - | USART6_RX_1 | USART6_RX_2 | SPI4_RX_2 | SPI4_TX_2 | - | USART6_TX_1 | USART6_TX_2 | +| Channel 6 | TIM1_TRIG_1 | TIM1_CH1_2 | TIM1_CH2_2 | TIM1_CH1 | TIM1_CH4 | TIM1_UP | TIM1_CH3_2 | - | +| | | | | | TIM1_TRIG_2 | | | | +| | | | | | TIM1_COM | | | | +| Channel 7 | - | TIM8_UP | TIM8_CH1_2 | TIM8_CH2_2 | TIM8_CH3_2 | SPI5_RX_2 | SPI5_TX_2 | TIM8_CH4 | +| | | | | | | | | TIM8_TRIG | +| | | | | | | | | TIM8_COM | +| Channel 8 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 | DSFDM1_FLT0 | DSFDM1_FLT1 | DSFDM1_FLT2 | DSFDM1_FLT3 | +| Channel 9 | JPEG_IN | JPEG_OUT | SPI4_TX | JPEG_IN | JPEG_OUT | SPI5_RX | - | - | +| Channel 10 | SAI1_B | SAI2_B | SAI2_A | - | - | - | SAI1_A | - | +| Channel 11 | SDMMC2 | - | QUADSPI | - | - | SDMMC2 | - | - | +| | | | | | | | | | +| Usage | SPI1_RX_1 | USART6_RX_2 | | SPI1_TX_1 | SPI5_TX_1 | SPI5_RX_2 | SDMMC1_2 | | + */ + +// DMA1 Channel/Stream Selections +//--------------------------------------------//---------------------------//---------------- +// DMAMAP_USART3_RX // DMA1, Stream 1, Channel 4 +// DMAMAP_UART4_RX // DMA1, Stream 2, Channel 4 +#define DMAMAP_USART3_TX DMAMAP_USART3_TX_1 // DMA1, Stream 3, Channel 4 +// AVAILABLE // DMA2, Stream 4 +// DMAMAP_USART2_RX // DMA1, Stream 5, Channel 4 + + +// DMA2 Channel/Stream Selections +//--------------------------------------------//---------------------------//---------------- +#define DMAMAP_SPI1_RX DMAMAP_SPI1_RX_1 // DMA2, Stream 0, Channel 3 (SPI1 sensors RX) +#define DMAMAP_USART6_RX DMAMAP_USART6_RX_1 // DMA2, Stream 1, Channel 5 +// AVAILABLE // DMA2, Stream 2 +#define DMAMAP_SPI1_TX DMAMAP_SPI1_TX_1 // DMA2, Stream 3, Channel 3 (SPI1 sensors TX) +#define DMAMAP_SPI5_TX DMAMAP_SPI5_TX_1 // DMA2, Stream 4, Channel 3 (SPI5 sensors TX) +#define DMAMAP_SPI5_RX DMAMAP_SPI5_RX_2 // DMA2, Stream 5, Channel 3 (SPI5 sensors RX) +#define DMAMAP_SDMMC1 DMAMAP_SDMMC1_2 // DMA2, Stream 6, Channel 4 +// AVAILABLE // DMA2, Stream 7, Channel 5 diff --git a/boards/mro/ctrl-zero-f7-oem/nuttx-config/nsh/defconfig b/boards/mro/ctrl-zero-f7-oem/nuttx-config/nsh/defconfig new file mode 100644 index 0000000000..fdad0fa052 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/nuttx-config/nsh/defconfig @@ -0,0 +1,237 @@ +# +# This file is autogenerated: PLEASE DO NOT EDIT IT. +# +# You can use "make menuconfig" to make any modifications to the installed .config file. +# You can then do "make savedefconfig" to generate a new defconfig file that includes your +# modifications. +# +# CONFIG_DISABLE_ENVIRON is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_MMCSD_HAVE_CARDDETECT is not set +# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set +# CONFIG_MMCSD_MMCSUPPORT is not set +# CONFIG_MMCSD_SPI is not set +# CONFIG_NSH_DISABLEBG is not set +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_DISABLE_TIME is not set +CONFIG_ARCH="arm" +CONFIG_ARCH_BOARD_CUSTOM=y +CONFIG_ARCH_BOARD_CUSTOM_DIR="../nuttx-config" +CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y +CONFIG_ARCH_BOARD_CUSTOM_NAME="px4" +CONFIG_ARCH_CHIP="stm32f7" +CONFIG_ARCH_CHIP_STM32F777II=y +CONFIG_ARCH_CHIP_STM32F7=y +CONFIG_ARCH_INTERRUPTSTACK=512 +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARMV7M_BASEPRI_WAR=y +CONFIG_ARMV7M_DCACHE=y +CONFIG_ARMV7M_DTCM=y +CONFIG_ARMV7M_ICACHE=y +CONFIG_ARMV7M_MEMCPY=y +CONFIG_ARMV7M_USEBASEPRI=y +CONFIG_BOARDCTL_RESET=y +CONFIG_BOARD_CRASHDUMP=y +CONFIG_BOARD_LOOPSPERMSEC=22114 +CONFIG_BOARD_RESET_ON_ASSERT=2 +CONFIG_BUILTIN=y +CONFIG_C99_BOOL8=y +CONFIG_CDCACM=y +CONFIG_CDCACM_PRODUCTID=0x008D +CONFIG_CDCACM_PRODUCTSTR="mRoControlZeroF7" +CONFIG_CDCACM_RXBUFSIZE=600 +CONFIG_CDCACM_TXBUFSIZE=12000 +CONFIG_CDCACM_VENDORID=0x26ac +CONFIG_CDCACM_VENDORSTR="mRo" +CONFIG_CLOCK_MONOTONIC=y +CONFIG_DEBUG_FULLOPT=y +CONFIG_DEBUG_HARDFAULT_ALERT=y +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEFAULT_SMALL=y +CONFIG_DEV_FIFO_SIZE=0 +CONFIG_DEV_PIPE_MAXSIZE=1024 +CONFIG_DEV_PIPE_SIZE=70 +CONFIG_DISABLE_MQUEUE=y +CONFIG_FAT_DMAMEMORY=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_LFN_ALIAS_HASH=y +CONFIG_FDCLONE_STDIO=y +CONFIG_FS_BINFS=y +CONFIG_FS_CROMFS=y +CONFIG_FS_FAT=y +CONFIG_FS_FATTIME=y +CONFIG_FS_PROCFS=y +CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y +CONFIG_FS_PROCFS_REGISTER=y +CONFIG_FS_ROMFS=y +CONFIG_GRAN=y +CONFIG_GRAN_INTR=y +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_I2C=y +CONFIG_I2C_RESET=y +CONFIG_IDLETHREAD_STACKSIZE=750 +CONFIG_LIBC_FLOATINGPOINT=y +CONFIG_LIBC_LONG_LONG=y +CONFIG_LIBC_STRERROR=y +CONFIG_MAX_TASKS=64 +CONFIG_MEMSET_64BIT=y +CONFIG_MEMSET_OPTSPEED=y +CONFIG_MMCSD=y +CONFIG_MMCSD_SDIO=y +CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y +CONFIG_MM_REGIONS=3 +CONFIG_MTD=y +CONFIG_MTD_BYTE_WRITE=y +CONFIG_MTD_PARTITION=y +CONFIG_MTD_RAMTRON=y +CONFIG_NAME_MAX=40 +CONFIG_NFILE_DESCRIPTORS=12 +CONFIG_NSH_ARCHINIT=y +CONFIG_NSH_ARCHROMFS=y +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_BUILTIN_APPS=y +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_CROMFSETC=y +CONFIG_NSH_DISABLE_IFCONFIG=y +CONFIG_NSH_DISABLE_IFUPDOWN=y +CONFIG_NSH_DISABLE_MB=y +CONFIG_NSH_DISABLE_MH=y +CONFIG_NSH_DISABLE_TELNETD=y +CONFIG_NSH_LINELEN=128 +CONFIG_NSH_MAXARGUMENTS=15 +CONFIG_NSH_NESTDEPTH=8 +CONFIG_NSH_QUOTE=y +CONFIG_NSH_ROMFSETC=y +CONFIG_NSH_ROMFSSECTSIZE=128 +CONFIG_NSH_STRERROR=y +CONFIG_NSH_VARS=y +CONFIG_PIPES=y +CONFIG_PREALLOC_TIMERS=50 +CONFIG_PRIORITY_INHERITANCE=y +CONFIG_PTHREAD_MUTEX_ROBUST=y +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_RAMTRON_SETSPEED=y +CONFIG_RAMTRON_WRITEWAIT=y +CONFIG_RAM_SIZE=245760 +CONFIG_RAM_START=0x20010000 +CONFIG_RAW_BINARY=y +CONFIG_RTC_DATETIME=y +CONFIG_SCHED_ATEXIT=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_HPWORKPRIORITY=249 +CONFIG_SCHED_HPWORKSTACKSIZE=1280 +CONFIG_SCHED_INSTRUMENTATION=y +CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y +CONFIG_SCHED_LPWORK=y +CONFIG_SCHED_LPWORKPRIORITY=50 +CONFIG_SCHED_LPWORKSTACKSIZE=1632 +CONFIG_SCHED_WAITPID=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_SDMMC1_SDIO_MODE=y +CONFIG_SDMMC1_SDIO_PULLUP=y +CONFIG_SEM_NNESTPRIO=8 +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y +CONFIG_SERIAL_TERMIOS=y +CONFIG_SIG_DEFAULT=y +CONFIG_SIG_SIGALRM_ACTION=y +CONFIG_SIG_SIGUSR1_ACTION=y +CONFIG_SIG_SIGUSR2_ACTION=y +CONFIG_SIG_SIGWORK=4 +CONFIG_STACK_COLORATION=y +CONFIG_START_DAY=30 +CONFIG_START_MONTH=11 +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_STM32F7_ADC1=y +CONFIG_STM32F7_BBSRAM=y +CONFIG_STM32F7_BBSRAM_FILES=5 +CONFIG_STM32F7_BKPSRAM=y +CONFIG_STM32F7_DMA1=y +CONFIG_STM32F7_DMA2=y +CONFIG_STM32F7_DMACAPABLE=y +CONFIG_STM32F7_FLOWCONTROL_BROKEN=y +CONFIG_STM32F7_I2C1=y +CONFIG_STM32H7_I2C3=y +CONFIG_STM32H7_I2C4=y +CONFIG_STM32F7_I2C_DYNTIMEO=y +CONFIG_STM32F7_I2C_DYNTIMEO_STARTSTOP=10 +CONFIG_STM32F7_OTGFS=y +CONFIG_STM32F7_PROGMEM=y +CONFIG_STM32F7_PWR=y +CONFIG_STM32F7_RTC=y +CONFIG_STM32F7_RTC_HSECLOCK=y +CONFIG_STM32F7_RTC_MAGIC_REG=1 +CONFIG_STM32F7_SAVE_CRASHDUMP=y +CONFIG_STM32F7_SDMMC1=y +CONFIG_STM32F7_SDMMC_DMA=y +CONFIG_STM32F7_SERIALBRK_BSDCOMPAT=y +CONFIG_STM32F7_SERIAL_DISABLE_REORDERING=y +CONFIG_STM32F7_SPI1=y +CONFIG_STM32F7_SPI1_DMA=y +CONFIG_STM32F7_SPI1_DMA_BUFFER=1024 +CONFIG_STM32F7_SPI2=y +CONFIG_STM32F7_SPI5=y +CONFIG_STM32F7_SPI5_DMA=y +CONFIG_STM32F7_SPI5_DMA_BUFFER=1024 +CONFIG_STM32F7_SPI_DMA=y +CONFIG_STM32F7_SPI_DMATHRESHOLD=8 +CONFIG_STM32F7_TIM10=y +CONFIG_STM32F7_TIM11=y +CONFIG_STM32F7_TIM3=y +CONFIG_STM32F7_TIM9=y +CONFIG_STM32F7_UART4=y +CONFIG_STM32F7_UART7=y +CONFIG_STM32F7_UART8=y +CONFIG_STM32F7_USART2=y +CONFIG_STM32F7_USART3=y +CONFIG_STM32F7_USART6=y +CONFIG_STM32F7_USART_BREAKS=y +CONFIG_STM32F7_USART_INVERT=y +CONFIG_STM32F7_USART_SINGLEWIRE=y +CONFIG_STM32F7_USART_SWAP=y +CONFIG_STM32F7_WWDG=y +CONFIG_SYSTEM_CDCACM=y +CONFIG_SYSTEM_NSH=y +CONFIG_TASK_NAME_SIZE=24 +CONFIG_UART4_BAUD=57600 +CONFIG_UART4_RXBUFSIZE=600 +CONFIG_UART4_RXDMA=y +CONFIG_UART4_TXBUFSIZE=1500 +CONFIG_UART7_BAUD=57600 +CONFIG_UART7_RXBUFSIZE=600 +CONFIG_UART7_SERIAL_CONSOLE=y +CONFIG_UART7_TXBUFSIZE=1500 +CONFIG_UART8_BAUD=57600 +CONFIG_UART8_RXBUFSIZE=600 +CONFIG_UART8_TXBUFSIZE=1500 +CONFIG_USART2_BAUD=57600 +CONFIG_USART2_IFLOWCONTROL=y +CONFIG_USART2_OFLOWCONTROL=y +CONFIG_USART2_RXBUFSIZE=600 +CONFIG_USART2_RXDMA=y +CONFIG_USART2_TXBUFSIZE=1500 +CONFIG_USART3_BAUD=57600 +CONFIG_USART3_IFLOWCONTROL=y +CONFIG_USART3_OFLOWCONTROL=y +CONFIG_USART3_RXBUFSIZE=600 +CONFIG_USART3_RXDMA=y +CONFIG_USART3_TXBUFSIZE=3000 +CONFIG_USART6_BAUD=57600 +CONFIG_USART6_RXBUFSIZE=600 +CONFIG_USART6_RXDMA=y +CONFIG_USART6_TXBUFSIZE=1500 +CONFIG_USBDEV=y +CONFIG_USBDEV_BUSPOWERED=y +CONFIG_USBDEV_MAXPOWER=500 +CONFIG_USEC_PER_TICK=1000 +CONFIG_USERMAIN_STACKSIZE=2944 +CONFIG_USER_ENTRYPOINT="nsh_main" diff --git a/boards/mro/ctrl-zero-f7-oem/nuttx-config/scripts/script.ld b/boards/mro/ctrl-zero-f7-oem/nuttx-config/scripts/script.ld new file mode 100644 index 0000000000..47b29d3493 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/nuttx-config/scripts/script.ld @@ -0,0 +1,181 @@ +/**************************************************************************** + * scripts/script.ld + * + * Copyright (C) 2019-2020 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32F765IIT6 has 2048 KiB of main FLASH memory. This FLASH memory + * can be accessed from either the AXIM interface at address 0x0800:0000 or + * from the ITCM interface at address 0x0020:0000. + * + * Additional information, including the option bytes, is available at at + * FLASH at address 0x1ff0:0000 (AXIM) or 0x0010:0000 (ITCM). + * + * In the STM32F765IIT6, two different boot spaces can be selected through + * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and + * BOOT_ADD1 option bytes: + * + * 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0]. + * ST programmed value: Flash on ITCM at 0x0020:0000 + * 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0]. + * ST programmed value: System bootloader at 0x0010:0000 + * + * NuttX does not modify these option byes. On the unmodified NUCLEO-144 + * board, the BOOT0 pin is at ground so by default, the STM32F765IIT6 will + * boot from address 0x0020:0000 in ITCM FLASH. + * + * The STM32F765IIT6 also has 512 KiB of data SRAM (in addition to ITCM SRAM). + * SRAM is split up into three blocks: + * + * 1) 128 KiB of DTCM SRM beginning at address 0x2000:0000 + * 2) 368 KiB of SRAM1 beginning at address 0x2002:0000 + * 3) 16 KiB of SRAM2 beginning at address 0x2007:c000 + * + * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 + * where the code expects to begin execution by jumping to the entry point in + * the 0x0800:0000 address range. + * + * Bootloader reserves three 32K banks (2 Mbytes Flash memory single bank) + * organization (256 bits read width) + */ + +MEMORY +{ + FLASH_ITCM (rx) : ORIGIN = 0x00218000, LENGTH = 1952K + FLASH_AXIM (rx) : ORIGIN = 0x08018000, LENGTH = 1952K /* start on 4th sector (1st sector for bootloader, 2 for extra storage) */ + + ITCM_RAM (rwx) : ORIGIN = 0x00000000, LENGTH = 16K + DTCM_RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 128K + SRAM1 (rwx) : ORIGIN = 0x20020000, LENGTH = 368K + SRAM2 (rwx) : ORIGIN = 0x2007c000, LENGTH = 16K +} + +OUTPUT_ARCH(arm) +EXTERN(_vectors) +ENTRY(_stext) + +/* + * Ensure that abort() is present in the final object. The exception handling + * code pulled in by libgcc.a requires it (and that code cannot be easily avoided). + */ +EXTERN(abort) +EXTERN(_bootdelay_signature) + +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + . = ALIGN(32); + /* + This signature provides the bootloader with a way to delay booting + */ + _bootdelay_signature = ABSOLUTE(.); + FILL(0xffecc2925d7d05c5) + . += 8; + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + + } > FLASH_AXIM + + /* + * Init functions (static constructors and the like) + */ + .init_section : { + _sinit = ABSOLUTE(.); + KEEP(*(.init_array .init_array.*)) + _einit = ABSOLUTE(.); + } > FLASH_AXIM + + + .ARM.extab : { + *(.ARM.extab*) + } > FLASH_AXIM + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > FLASH_AXIM + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > SRAM1 AT > FLASH_AXIM + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(4); + _ebss = ABSOLUTE(.); + } > SRAM1 + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } + + .ramfunc : { + _sramfuncs = .; + *(.ramfunc .ramfunc.*) + . = ALIGN(4); + _eramfuncs = .; + } > ITCM_RAM AT > FLASH_AXIM + + _framfuncs = LOADADDR(.ramfunc); +} diff --git a/boards/mro/ctrl-zero-f7-oem/src/CMakeLists.txt b/boards/mro/ctrl-zero-f7-oem/src/CMakeLists.txt new file mode 100644 index 0000000000..a533df7c69 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/CMakeLists.txt @@ -0,0 +1,51 @@ +############################################################################ +# +# Copyright (c) 2019 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +add_library(drivers_board + init.c + i2c.cpp + led.c + sdio.c + spi.cpp + timer_config.cpp + usb.c +) + +target_link_libraries(drivers_board + PRIVATE + arch_spi + drivers__led # drv_led_start + nuttx_arch # sdio + nuttx_drivers # sdio + px4_layer +) diff --git a/boards/mro/ctrl-zero-f7-oem/src/board_config.h b/boards/mro/ctrl-zero-f7-oem/src/board_config.h new file mode 100644 index 0000000000..a98f9c40e4 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/board_config.h @@ -0,0 +1,241 @@ +/**************************************************************************** + * + * Copyright (c) 2019-2020 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file board_config.h + * + * mro_ctrl-zero-f7 internal definitions + */ + +#pragma once + +/**************************************************************************************************** + * Included Files + ****************************************************************************************************/ + +#include +#include +#include + +#include + +/**************************************************************************************************** + * Definitions + ****************************************************************************************************/ + +/* GPIOs ***********************************************************************************/ + +/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */ + +#define GPIO_nLED_RED /* PB11 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11) +#define GPIO_nLED_GREEN /* PB1 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN1) +#define GPIO_nLED_BLUE /* PB3 */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN3) + +#define BOARD_HAS_CONTROL_STATUS_LEDS 1 +#define BOARD_OVERLOAD_LED LED_RED +#define BOARD_ARMED_STATE_LED LED_BLUE + +/* + * ADC channels + * + * These are the channel numbers of the ADCs of the microcontroller that + * can be used by the Px4 Firmware in the adc driver + */ + +/* ADC defines to be used in sensors.cpp to read from a particular channel */ +#define ADC1_CH(n) (n) +#define ADC1_GPIO(n) GPIO_ADC1_IN##n + +/* Define GPIO pins used as ADC N.B. Channel numbers must match below */ +#define PX4_ADC_GPIO \ + /* PA2 */ ADC1_GPIO(2), \ + /* PA3 */ ADC1_GPIO(3), \ + /* PA4 */ ADC1_GPIO(4), \ + /* PC1 */ ADC1_GPIO(11) + +/* Define Channel numbers must match above GPIO pin IN(n)*/ +#define ADC_BATTERY_VOLTAGE_CHANNEL /* PA2 */ ADC1_CH(2) +#define ADC_BATTERY_CURRENT_CHANNEL /* PA3 */ ADC1_CH(3) +#define ADC_SCALED_V5_CHANNEL /* PA4 */ ADC1_CH(4) +#define ADC_RC_RSSI_CHANNEL /* PC1 */ ADC1_CH(11) + +#define ADC_CHANNELS \ + ((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \ + (1 << ADC_BATTERY_CURRENT_CHANNEL) | \ + (1 << ADC_SCALED_V5_CHANNEL) | \ + (1 << ADC_RC_RSSI_CHANNEL)) + +/* Define Battery 1 Voltage Divider and A per V */ +#define BOARD_BATTERY1_V_DIV (18.1f) /* measured with the provided PM board */ +#define BOARD_BATTERY1_A_PER_V (36.367515152f) + +/* HW has to large of R termination on ADC todo:change when HW value is chosen */ +#define BOARD_ADC_OPEN_CIRCUIT_V (5.6f) + +/* CAN Silence: Silent mode control \ ESC Mux select */ +#define GPIO_CAN1_SILENT_S0 /* PF5 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN5) + +/* PWM */ +#define DIRECT_PWM_OUTPUT_CHANNELS 8 +#define DIRECT_INPUT_TIMER_CHANNELS 8 + +/* Power supply control and monitoring GPIOs */ +#define GPIO_nPOWER_IN_A /* PB5 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5) + +#define GPIO_VDD_BRICK1_VALID GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */ +#define BOARD_NUMBER_BRICKS 1 + +#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN /* PE4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN4) + +/* Define True logic Power Control in arch agnostic form */ +#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (!on_true)) +#define READ_VDD_3V3_SPEKTRUM_POWER_EN() (px4_arch_gpioread(GPIO_VDD_3V3_SPEKTRUM_POWER_EN) == 0) + +/* Tone alarm output */ +#define TONE_ALARM_TIMER 2 /* timer 2 */ +#define TONE_ALARM_CHANNEL 1 /* PA15 TIM2_CH1 */ + +#define GPIO_BUZZER_1 /* PA15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15) + +#define GPIO_TONE_ALARM_IDLE GPIO_BUZZER_1 +#define GPIO_TONE_ALARM GPIO_TIM2_CH1OUT_2 + +/* USB OTG FS */ +#define GPIO_OTGFS_VBUS /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9) + +/* High-resolution timer */ +#define HRT_TIMER 3 /* use timer3 for the HRT */ +#define HRT_TIMER_CHANNEL 2 /* use capture/compare channel 2 */ + +#define HRT_PPM_CHANNEL /* T3C3 */ 3 /* use capture/compare channel 3 */ +#define GPIO_PPM_IN /* PB0 T3C3 */ GPIO_TIM3_CH3IN_1 + +/* RC Serial port */ +#define RC_SERIAL_PORT "/dev/ttyS3" + +#define GPIO_RSSI_IN /* PC1 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN1) + +/* Safety Switch: Enable the FMU to control it if there is no px4io fixme:This should be BOARD_SAFETY_LED(__ontrue) */ +#define GPIO_SAFETY_SWITCH_IN /* PC4 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN4) +/* Enable the FMU to use the switch it if there is no px4io fixme:This should be BOARD_SAFTY_BUTTON() */ +#define GPIO_BTN_SAFETY GPIO_SAFETY_SWITCH_IN /* Enable the FMU to control it if there is no px4io */ + +/* Power switch controls ******************************************************/ +#define SPEKTRUM_POWER(_on_true) VDD_3V3_SPEKTRUM_POWER_EN(_on_true) + +/* + * Board has a separate RC_IN + * + * GPIO PPM_IN on PB0 T3CH3 + * SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7 + * Inversion is possible in the UART and can drive GPIO_PPM_IN as an output + */ +#define GPIO_PPM_IN_AS_OUT (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0) +#define SPEKTRUM_RX_AS_GPIO_OUTPUT() px4_arch_configgpio(GPIO_PPM_IN_AS_OUT) +#define SPEKTRUM_RX_AS_UART() /* Can be left as uart */ +#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true)) + +#define SDIO_SLOTNO 0 /* Only one slot */ +#define SDIO_MINOR 0 + +/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction) + * this board support the ADC system_power interface, and therefore + * provides the true logic GPIO BOARD_ADC_xxxx macros. + */ +#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS)) +#define BOARD_ADC_USB_VALID BOARD_ADC_USB_CONNECTED +#define BOARD_ADC_SERVO_VALID (1) /* never powers off the Servo rail */ +#define BOARD_ADC_BRICK_VALID (px4_arch_gpioread(GPIO_VDD_BRICK1_VALID)) + +#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS + +/* This board provides a DMA pool and APIs */ +#define BOARD_DMA_ALLOC_POOL_SIZE 5120 + +/* This board provides the board_on_reset interface */ +#define BOARD_HAS_ON_RESET 1 + +#define PX4_GPIO_INIT_LIST { \ + PX4_ADC_GPIO, \ + GPIO_CAN1_TX, \ + GPIO_CAN1_RX, \ + GPIO_CAN2_TX, \ + GPIO_CAN2_RX, \ + GPIO_CAN1_SILENT_S0, \ + GPIO_nPOWER_IN_A, \ + GPIO_VDD_3V3_SPEKTRUM_POWER_EN, \ + GPIO_TONE_ALARM_IDLE, \ + GPIO_SAFETY_SWITCH_IN, \ + } + +#define BOARD_ENABLE_CONSOLE_BUFFER + +#define BOARD_NUM_IO_TIMERS 3 + +__BEGIN_DECLS + +#ifndef __ASSEMBLY__ + +/**************************************************************************************************** + * Public Functions + ****************************************************************************************************/ + +/**************************************************************************** + * Name: stm32_sdio_initialize + * + * Description: + * Initialize SDIO-based MMC/SD card support + * + ****************************************************************************/ + +int stm32_sdio_initialize(void); + +/**************************************************************************************************** + * Name: stm32_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the PX4FMU board. + * + ****************************************************************************************************/ + +extern void stm32_spiinitialize(void); + +extern void stm32_usbinitialize(void); + +extern void board_peripheral_reset(int ms); + +#include + +#endif /* __ASSEMBLY__ */ + +__END_DECLS diff --git a/boards/mro/ctrl-zero-f7-oem/src/i2c.cpp b/boards/mro/ctrl-zero-f7-oem/src/i2c.cpp new file mode 100644 index 0000000000..de6742ac58 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/i2c.cpp @@ -0,0 +1,40 @@ +/**************************************************************************** + * + * Copyright (C) 2020 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include + +constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = { + initI2CBusExternal(1), + initI2CBusInternal(3), + initI2CBusExternal(4), +}; diff --git a/boards/mro/ctrl-zero-f7-oem/src/init.c b/boards/mro/ctrl-zero-f7-oem/src/init.c new file mode 100644 index 0000000000..4d8e58d159 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/init.c @@ -0,0 +1,250 @@ +/**************************************************************************** + * + * Copyright (c) 2019-2020 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file init.c + * + * Board-specific early startup code. This file implements the + * board_app_initializ() function that is called early by nsh during startup. + * + * Code here is run before the rcS script is invoked; it should start required + * subsystems and perform board-specific initialisation. + */ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include "board_config.h" + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "arm_internal.h" + +#include +#include +#include +#include +#include +#include +#include + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +/* + * Ideally we'd be able to get these from arm_internal.h, + * but since we want to be able to disable the NuttX use + * of leds for system indication at will and there is no + * separate switch, we need to build independent of the + * CONFIG_ARCH_LEDS configuration switch. + */ +__BEGIN_DECLS +extern void led_init(void); +extern void led_on(int led); +extern void led_off(int led); +__END_DECLS + +/************************************************************************************ + * Name: board_peripheral_reset + * + * Description: + * + ************************************************************************************/ +__EXPORT void board_peripheral_reset(int ms) +{ + bool last = READ_VDD_3V3_SPEKTRUM_POWER_EN(); + /* Keep Spektum on to discharge rail*/ + VDD_3V3_SPEKTRUM_POWER_EN(false); + + /* wait for the peripheral rail to reach GND */ + usleep(ms * 1000); + syslog(LOG_DEBUG, "reset done, %d ms\n", ms); + + /* re-enable power */ + + /* switch the peripheral rail back on */ + VDD_3V3_SPEKTRUM_POWER_EN(last); +} + +/************************************************************************************ + * Name: board_on_reset + * + * Description: + * Optionally provided function called on entry to board_system_reset + * It should perform any house keeping prior to the rest. + * + * status - 1 if resetting to boot loader + * 0 if just resetting + * + ************************************************************************************/ +__EXPORT void board_on_reset(int status) +{ + for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) { + px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i))); + } + + if (status >= 0) { + up_mdelay(6); + } +} + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the initialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +__EXPORT void +stm32_boardinitialize(void) +{ + board_on_reset(-1); /* Reset PWM first thing */ + + /* configure LEDs */ + board_autoled_initialize(); + + /* configure pins */ + const uint32_t gpio[] = PX4_GPIO_INIT_LIST; + px4_gpio_init(gpio, arraySize(gpio)); + board_control_spi_sensors_power_configgpio(); + + /* configure USB interfaces */ + stm32_usbinitialize(); +} + +/**************************************************************************** + * Name: board_app_initialize + * + * Description: + * Perform application specific initialization. This function is never + * called directly from application code, but only indirectly via the + * (non-standard) boardctl() interface using the command BOARDIOC_INIT. + * + * Input Parameters: + * arg - The boardctl() argument is passed to the board_app_initialize() + * implementation without modification. The argument has no + * meaning to NuttX; the meaning of the argument is a contract + * between the board-specific initialization logic and the the + * matching application logic. The value cold be such things as a + * mode enumeration value, a set of DIP switch switch settings, a + * pointer to configuration data read from a file or serial FLASH, + * or whatever you would like to do with it. Every implementation + * should accept zero/NULL as a default configuration. + * + * Returned Value: + * Zero (OK) is returned on success; a negated errno value is returned on + * any failure to indicate the nature of the failure. + * + ****************************************************************************/ + + +__EXPORT int board_app_initialize(uintptr_t arg) +{ + /* Power on Interfaces */ + board_control_spi_sensors_power(true, 0xffff); + VDD_3V3_SPEKTRUM_POWER_EN(true); + + px4_platform_init(); + + stm32_spiinitialize(); + + /* configure the DMA allocator */ + if (board_dma_alloc_init() < 0) { + syslog(LOG_ERR, "[boot] DMA alloc FAILED\n"); + } + + /* set up the serial DMA polling */ + static struct hrt_call serial_dma_call; + + /* + * Poll at 1ms intervals for received bytes that have not triggered + * a DMA event. + */ + struct timespec ts; + ts.tv_sec = 0; + ts.tv_nsec = 1000000; + + hrt_call_every(&serial_dma_call, + ts_to_abstime(&ts), + ts_to_abstime(&ts), + (hrt_callout)stm32_serial_dma_poll, + NULL); + + + /* initial LED state */ + drv_led_start(); + led_off(LED_RED); + led_on(LED_GREEN); // Indicate Power. + led_off(LED_BLUE); + + if (board_hardfault_init(2, true) != 0) { + led_on(LED_RED); + } + +#ifdef CONFIG_MMCSD + int ret = stm32_sdio_initialize(); + + if (ret != OK) { + led_on(LED_RED); + return ret; + } + +#endif /* CONFIG_MMCSD */ + + /* Configure the HW based on the manifest */ + + px4_platform_configure(); + + return OK; +} diff --git a/boards/mro/ctrl-zero-f7-oem/src/led.c b/boards/mro/ctrl-zero-f7-oem/src/led.c new file mode 100644 index 0000000000..e88d37c0dd --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/led.c @@ -0,0 +1,103 @@ +/**************************************************************************** + * + * Copyright (c) 2019 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file led.c + * + * LED backend. + */ + +#include + +#include + +#include "chip.h" +#include "stm32_gpio.h" +#include "board_config.h" + +#include +#include + +/* + * Ideally we'd be able to get these from arm_internal.h, + * but since we want to be able to disable the NuttX use + * of leds for system indication at will and there is no + * separate switch, we need to build independent of the + * CONFIG_ARCH_LEDS configuration switch. + */ +__BEGIN_DECLS +extern void led_init(void); +extern void led_on(int led); +extern void led_off(int led); +extern void led_toggle(int led); +__END_DECLS + +static uint32_t g_ledmap[] = { + GPIO_nLED_BLUE, // Indexed by LED_BLUE + GPIO_nLED_RED, // Indexed by LED_RED + GPIO_nLED_GREEN, // Indexed by LED_GREEN +}; + +__EXPORT void led_init(void) +{ + for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) { + stm32_configgpio(g_ledmap[l]); + } +} + +static void phy_set_led(int led, bool state) +{ + /* Drive Low to switch on */ + stm32_gpiowrite(g_ledmap[led], !state); +} + +static bool phy_get_led(int led) +{ + /* If Low it is on */ + return !stm32_gpioread(g_ledmap[led]); +} + +__EXPORT void led_on(int led) +{ + phy_set_led(led, true); +} + +__EXPORT void led_off(int led) +{ + phy_set_led(led, false); +} + +__EXPORT void led_toggle(int led) +{ + phy_set_led(led, !phy_get_led(led)); +} diff --git a/boards/mro/ctrl-zero-f7-oem/src/sdio.c b/boards/mro/ctrl-zero-f7-oem/src/sdio.c new file mode 100644 index 0000000000..bb56cc8a8b --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/sdio.c @@ -0,0 +1,171 @@ +/**************************************************************************** + * + * Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "chip.h" +#include "board_config.h" +#include "stm32_gpio.h" +#include "stm32_sdmmc.h" + +#ifdef CONFIG_MMCSD + + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Card detections requires card support and a card detection GPIO */ + +#define HAVE_NCD 1 +#if !defined(GPIO_SDMMC1_NCD) +# undef HAVE_NCD +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +static FAR struct sdio_dev_s *sdio_dev; +#ifdef HAVE_NCD +static bool g_sd_inserted = 0xff; /* Impossible value */ +#endif + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_ncd_interrupt + * + * Description: + * Card detect interrupt handler. + * + ****************************************************************************/ + +#ifdef HAVE_NCD +static int stm32_ncd_interrupt(int irq, FAR void *context) +{ + bool present = !stm32_gpioread(GPIO_SDMMC1_NCD); + + if (sdio_dev && present != g_sd_inserted) { + sdio_mediachange(sdio_dev, present); + g_sd_inserted = present; + } + + return OK; +} +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_sdio_initialize + * + * Description: + * Initialize SDIO-based MMC/SD card support + * + ****************************************************************************/ + +int stm32_sdio_initialize(void) +{ + int ret; + +#ifdef HAVE_NCD + /* Card detect */ + bool cd_status; + + /* Configure the card detect GPIO */ + stm32_configgpio(GPIO_SDMMC1_NCD); + + /* Register an interrupt handler for the card detect pin */ + stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt); +#endif + + /* Mount the SDIO-based MMC/SD block driver */ + /* First, get an instance of the SDIO interface */ + finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO); + + sdio_dev = sdio_initialize(SDIO_SLOTNO); + + if (!sdio_dev) { + syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO); + return -ENODEV; + } + + /* Now bind the SDIO interface to the MMC/SD driver */ + + finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR); + + ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev); + + if (ret != OK) { + syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret); + return ret; + } + + finfo("Successfully bound SDIO to the MMC/SD driver\n"); + +#ifdef HAVE_NCD + /* Use SD card detect pin to check if a card is g_sd_inserted */ + + cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD); + finfo("Card detect : %d\n", cd_status); + + sdio_mediachange(sdio_dev, cd_status); +#else + /* Assume that the SD card is inserted. What choice do we have? */ + + sdio_mediachange(sdio_dev, true); +#endif + + return OK; +} + +#endif /* CONFIG_MMCSD */ diff --git a/boards/mro/ctrl-zero-f7-oem/src/spi.cpp b/boards/mro/ctrl-zero-f7-oem/src/spi.cpp new file mode 100644 index 0000000000..c64c0d5a63 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/spi.cpp @@ -0,0 +1,53 @@ +/**************************************************************************** + * + * Copyright (C) 2020 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include +#include +#include + +constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = { + initSPIBus(SPI::Bus::SPI1, { + initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortC, GPIO::Pin2}, SPI::DRDY{GPIO::PortD, GPIO::Pin15}), + initSPIDevice(DRV_IMU_DEVTYPE_ICM20948, SPI::CS{GPIO::PortE, GPIO::Pin15}, SPI::DRDY{GPIO::PortE, GPIO::Pin12}), + }, {GPIO::PortE, GPIO::Pin3}), + initSPIBus(SPI::Bus::SPI2, { + initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortD, GPIO::Pin10}), + initSPIDevice(DRV_BARO_DEVTYPE_DPS310, SPI::CS{GPIO::PortD, GPIO::Pin7}), + }), + initSPIBus(SPI::Bus::SPI5, { + initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin10}, SPI::DRDY{GPIO::PortF, GPIO::Pin3}), + initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin6}, SPI::DRDY{GPIO::PortF, GPIO::Pin1}), + }), +}; + +static constexpr bool unused = validateSPIConfig(px4_spi_buses); diff --git a/boards/mro/ctrl-zero-f7-oem/src/timer_config.cpp b/boards/mro/ctrl-zero-f7-oem/src/timer_config.cpp new file mode 100644 index 0000000000..52109c4f06 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/timer_config.cpp @@ -0,0 +1,54 @@ +/**************************************************************************** + * + * Copyright (C) 2019 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#include + +constexpr io_timers_t io_timers[MAX_IO_TIMERS] = { + initIOTimer(Timer::Timer1), + initIOTimer(Timer::Timer4), + initIOTimer(Timer::Timer8), +}; + +constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = { + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}), + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}), + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}), + initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}), + initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}), + initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}), + initIOTimerChannel(io_timers, {Timer::Timer8, Timer::Channel1}, {GPIO::PortI, GPIO::Pin5}), + initIOTimerChannel(io_timers, {Timer::Timer8, Timer::Channel2}, {GPIO::PortI, GPIO::Pin6}), +}; + +constexpr io_timers_channel_mapping_t io_timers_channel_mapping = + initIOTimerChannelMapping(io_timers, timer_io_channels); diff --git a/boards/mro/ctrl-zero-f7-oem/src/usb.c b/boards/mro/ctrl-zero-f7-oem/src/usb.c new file mode 100644 index 0000000000..0ea22da849 --- /dev/null +++ b/boards/mro/ctrl-zero-f7-oem/src/usb.c @@ -0,0 +1,105 @@ +/**************************************************************************** + * + * Copyright (C) 2019 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file usb.c + * + * Board-specific USB functions. + */ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include "board_config.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_usbinitialize + * + * Description: + * Called to setup USB-related GPIO pins for the board. + * + ************************************************************************************/ + +__EXPORT void stm32_usbinitialize(void) +{ + /* The OTG FS has an internal soft pull-up */ + + /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ + +#ifdef CONFIG_STM32F7_OTGFS + stm32_configgpio(GPIO_OTGFS_VBUS); +#endif +} + +/************************************************************************************ + * Name: stm32_usbsuspend + * + * Description: + * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is + * used. This function is called whenever the USB enters or leaves suspend mode. + * This is an opportunity for the board logic to shutdown clocks, power, etc. + * while the USB is suspended. + * + ************************************************************************************/ + +__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) +{ + uinfo("resume: %d\n", resume); +}