Resync new repository with old repo r5166

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3

nuttx/arch/hc/src/common/up_initialize.c

@@ -0,0 +1,180 @@
+/****************************************************************************
+ * arch/hc/src/common/up_initialize.c
+ *
+ *   Copyright (C) 2009-2010, 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/fs/fs.h>
+#include <nuttx/ramlog.h>
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_calibratedelay
+ *
+ * Description:
+ *   Delay loops are provided for short timing loops.  This function, if
+ *   enabled, will just wait for 100 seconds.  Using a stopwatch, you can
+ *   can then determine if the timing loops are properly calibrated.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_ARCH_CALIBRATION) && defined(CONFIG_DEBUG)
+static void up_calibratedelay(void)
+{
+  int i;
+  lldbg("Beginning 100s delay\n");
+  for (i = 0; i < 100; i++)
+    {
+      up_mdelay(1000);
+    }
+  lldbg("End 100s delay\n");
+}
+#else
+# define up_calibratedelay()
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_initialize
+ *
+ * Description:
+ *   up_initialize will be called once during OS initialization after the
+ *   basic OS services have been initialized.  The architecture specific
+ *   details of initializing the OS will be handled here.  Such things as
+ *   setting up interrupt service routines, starting the clock, and
+ *   registering device drivers are some of the things that are different
+ *   for each processor and hardware platform.
+ *
+ *   up_initialize is called after the OS initialized but before the user
+ *   initialization logic has been started and before the libraries have
+ *   been initialized.  OS services and driver services are available.
+ *
+ ****************************************************************************/
+
+void up_initialize(void)
+{
+  /* Initialize global variables */
+
+  current_regs = NULL;
+
+  /* Calibrate the timing loop */
+
+  up_calibratedelay();
+
+  /* Add any extra memory fragments to the memory manager */
+
+  up_addregion();
+
+  /* Initialize the interrupt subsystem */
+
+  up_irqinitialize();
+
+  /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
+   * brought into the build
+   */
+
+#ifdef CONFIG_ARCH_DMA
+#ifdef CONFIG_HAVE_WEAKFUNCTIONS
+  if (up_dmainitialize)
+#endif
+    {
+      up_dmainitialize();
+    }
+#endif
+
+  /* Initialize the system timer interrupt */
+
+#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  up_timerinit();
+#endif
+
+  /* Register devices */
+
+#if CONFIG_NFILE_DESCRIPTORS > 0
+  devnull_register();   /* Standard /dev/null */
+#endif
+
+  /* Initialize the console device driver */
+
+#if defined(USE_SERIALDRIVER)
+  up_serialinit();
+#elif defined(CONFIG_DEV_LOWCONSOLE)
+  lowconsole_init();
+#elif defined(CONFIG_RAMLOG_CONSOLE)
+  ramlog_consoleinit();
+#endif
+
+  /* Initialize the system logging device */
+
+#ifdef CONFIG_SYSLOG_CHAR
+  syslog_initialize();
+#endif
+#ifdef CONFIG_RAMLOG_SYSLOG
+  ramlog_sysloginit();
+#endif
+
+  /* Initialize the network */
+
+  up_netinitialize();
+
+  /* Initialize USB */
+
+  up_usbinitialize();
+
+  up_ledon(LED_IRQSENABLED);
+}