fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-20 00:53:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'px4/new_state_machine_drton' into fmuv2_bringup_new_state_machine_drton

Browse Source 
Conflicts:
	src/drivers/blinkm/blinkm.cpp
	src/drivers/px4io/px4io.cpp
	src/modules/commander/state_machine_helper.c
	src/modules/px4iofirmware/protocol.h
	src/modules/px4iofirmware/registers.c
	src/modules/systemlib/systemlib.h
	src/systemcmds/reboot/reboot.c
This commit is contained in:
Julian Oes
2013-08-15 14:04:46 +02:00
parent 50cf1c01b7 561ec495b7
commit 56575eb068
86 changed files with 5851 additions and 3938 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/modules/px4iofirmware/protocol.h
+13 -2
View File
@@ -94,7 +94,7 @@
#define PX4IO_P_STATUS_CPULOAD 1
#define PX4IO_P_STATUS_FLAGS 2 /* monitoring flags */
#define PX4IO_P_STATUS_FLAGS_ARMED (1 << 0) /* arm-ok and locally armed */
#define PX4IO_P_STATUS_FLAGS_OUTPUTS_ARMED (1 << 0) /* arm-ok and locally armed */
#define PX4IO_P_STATUS_FLAGS_OVERRIDE (1 << 1) /* in manual override */
#define PX4IO_P_STATUS_FLAGS_RC_OK (1 << 2) /* RC input is valid */
#define PX4IO_P_STATUS_FLAGS_RC_PPM (1 << 3) /* PPM input is valid */
@@ -106,7 +106,8 @@
#define PX4IO_P_STATUS_FLAGS_ARM_SYNC (1 << 9) /* the arming state between IO and FMU is in sync */
#define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */
#define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */
#define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 12) /* DSM input is 11 bit data */
#define PX4IO_P_STATUS_FLAGS_SAFETY_OFF (1 << 12) /* safety is off */
#define PX4IO_P_STATUS_FLAGS_RC_DSM11 (1 << 13) /* DSM input is 11 bit data */
#define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */
#define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* [1] VBatt is very close to regulator dropout */
@@ -157,6 +158,7 @@
#define PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK (1 << 2) /* OK to switch to manual override via override RC channel */
#define PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM (1 << 3) /* use custom failsafe values, not 0 values of mixer */
#define PX4IO_P_SETUP_ARMING_INAIR_RESTART_OK (1 << 4) /* OK to try in-air restart */
#define PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE (1 << 5) /* Output of PWM right after startup enabled to help ESCs initialize and prevent them from beeping */
#define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */
#define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */
@@ -209,6 +211,15 @@ enum { /* DSM bind states */
#define PX4IO_PAGE_TEST 127
#define PX4IO_P_TEST_LED 0 /* set the amber LED on/off */
/* PWM minimum values for certain ESCs */
#define PX4IO_PAGE_CONTROL_MIN_PWM 106 /* 0..CONFIG_ACTUATOR_COUNT-1 */
/* PWM maximum values for certain ESCs */
#define PX4IO_PAGE_CONTROL_MAX_PWM 107 /* 0..CONFIG_ACTUATOR_COUNT-1 */
/* PWM idle values that are active, even when SAFETY_SAFE */
#define PX4IO_PAGE_IDLE_PWM 108 /* 0..CONFIG_ACTUATOR_COUNT-1 */
/**
* As-needed mixer data upload.
*