fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-18 20:53:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

Adapted the MPU6000 to have the same get range ioctls and defines for defaults

Browse Source
This commit is contained in:
Julian Oes
2013-08-21 14:52:20 +02:00
parent 1ede95d252
commit 4f51f333a9
1 changed files with 47 additions and 38 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/drivers/mpu6000/mpu6000.cpp
+47 -38
View File
@@ -149,6 +149,15 @@
#define MPU6000_REV_D9 0x59
#define MPU6000_REV_D10 0x5A
#define MPU6000_ACCEL_DEFAULT_RANGE_G 8
#define MPU6000_ACCEL_DEFAULT_RATE 1000
#define MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ 30
#define MPU6000_GYRO_DEFAULT_RANGE_G 8
#define MPU6000_GYRO_DEFAULT_RATE 1000
#define MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ 30
#define MPU6000_DEFAULT_ONCHIP_FILTER_FREQ 42
class MPU6000_gyro;
@@ -357,12 +366,12 @@ MPU6000::MPU6000(int bus, spi_dev_e device) :
_reads(0),
_sample_rate(1000),
_sample_perf(perf_alloc(PC_ELAPSED, "mpu6000_read")),
_accel_filter_x(1000, 30),
_accel_filter_y(1000, 30),
_accel_filter_z(1000, 30),
_gyro_filter_x(1000, 30),
_gyro_filter_y(1000, 30),
_gyro_filter_z(1000, 30)
_accel_filter_x(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ),
_accel_filter_y(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ),
_accel_filter_z(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ),
_gyro_filter_x(MPU6000_GYRO_DEFAULT_RATE, MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ),
_gyro_filter_y(MPU6000_GYRO_DEFAULT_RATE, MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ),
_gyro_filter_z(MPU6000_GYRO_DEFAULT_RATE, MPU6000_GYRO_DEFAULT_DRIVER_FILTER_FREQ)
{
// disable debug() calls
_debug_enabled = false;
@@ -485,14 +494,13 @@ void MPU6000::reset()
up_udelay(1000);
// SAMPLE RATE
//write_reg(MPUREG_SMPLRT_DIV, 0x04); // Sample rate = 200Hz Fsample= 1Khz/(4+1) = 200Hz
_set_sample_rate(_sample_rate); // default sample rate = 200Hz
_set_sample_rate(_sample_rate);
usleep(1000);
// FS & DLPF FS=2000 deg/s, DLPF = 20Hz (low pass filter)
// was 90 Hz, but this ruins quality and does not improve the
// system response
_set_dlpf_filter(42);
_set_dlpf_filter(MPU6000_DEFAULT_ONCHIP_FILTER_FREQ);
usleep(1000);
// Gyro scale 2000 deg/s ()
write_reg(MPUREG_GYRO_CONFIG, BITS_FS_2000DPS);
@@ -535,8 +543,8 @@ void MPU6000::reset()
// Correct accel scale factors of 4096 LSB/g
// scale to m/s^2 ( 1g = 9.81 m/s^2)
_accel_range_scale = (9.81f / 4096.0f);
_accel_range_m_s2 = 8.0f * 9.81f;
_accel_range_scale = (CONSTANTS_ONE_G / 4096.0f);
_accel_range_m_s2 = 8.0f * CONSTANTS_ONE_G;
usleep(1000);
@@ -777,9 +785,10 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg)
/* set default/max polling rate */
case SENSOR_POLLRATE_MAX:
return ioctl(filp, SENSORIOCSPOLLRATE, 1000);
case SENSOR_POLLRATE_DEFAULT:
/* set to same as sample rate per default */
return ioctl(filp, SENSORIOCSPOLLRATE, _sample_rate);
return ioctl(filp, SENSORIOCSPOLLRATE, MPU6000_ACCEL_DEFAULT_RATE);
/* adjust to a legal polling interval in Hz */
default: {
@@ -867,9 +876,9 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg)
// XXX decide on relationship of both filters
// i.e. disable the on-chip filter
//_set_dlpf_filter((uint16_t)arg);
_accel_filter_x.set_cutoff_frequency(1.0e6f / _call_interval, arg);
_accel_filter_y.set_cutoff_frequency(1.0e6f / _call_interval, arg);
_accel_filter_z.set_cutoff_frequency(1.0e6f / _call_interval, arg);
_accel_filter_x.set_cutoff_frequency(1.0e6f / _call_interval, arg);
_accel_filter_y.set_cutoff_frequency(1.0e6f / _call_interval, arg);
_accel_filter_z.set_cutoff_frequency(1.0e6f / _call_interval, arg);
return OK;
case ACCELIOCSSCALE:
@@ -897,7 +906,7 @@ MPU6000::ioctl(struct file *filp, int cmd, unsigned long arg)
// _accel_range_m_s2 = 8.0f * 9.81f;
return -EINVAL;
case ACCELIOCGRANGE:
return _accel_range_m_s2;
return (unsigned long)((_accel_range_m_s2)/CONSTANTS_ONE_G + 0.5f);
case ACCELIOCSELFTEST:
return accel_self_test();
@@ -920,29 +929,29 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg)
return ioctl(filp, cmd, arg);
case SENSORIOCSQUEUEDEPTH: {
/* lower bound is mandatory, upper bound is a sanity check */
if ((arg < 1) || (arg > 100))
return -EINVAL;
/* lower bound is mandatory, upper bound is a sanity check */
if ((arg < 1) || (arg > 100))
return -EINVAL;
/* allocate new buffer */
GyroReportBuffer *buf = new GyroReportBuffer(arg);
/* allocate new buffer */
GyroReportBuffer *buf = new GyroReportBuffer(arg);
if (nullptr == buf)
return -ENOMEM;
if (buf->size() == 0) {
delete buf;
return -ENOMEM;
}
/* reset the measurement state machine with the new buffer, free the old */
stop();
delete _gyro_reports;
_gyro_reports = buf;
start();
return OK;
if (nullptr == buf)
return -ENOMEM;
if (buf->size() == 0) {
delete buf;
return -ENOMEM;
}
/* reset the measurement state machine with the new buffer, free the old */
stop();
delete _gyro_reports;
_gyro_reports = buf;
start();
return OK;
}
case SENSORIOCGQUEUEDEPTH:
return _gyro_reports->size();
@@ -980,7 +989,7 @@ MPU6000::gyro_ioctl(struct file *filp, int cmd, unsigned long arg)
// _gyro_range_rad_s = xx
return -EINVAL;
case GYROIOCGRANGE:
return _gyro_range_rad_s;
return (unsigned long)(_gyro_range_rad_s * 180.0f / M_PI_F + 0.5f);
case GYROIOCSELFTEST:
return gyro_self_test();
@@ -1400,7 +1409,7 @@ test()
warnx("acc y: \t%d\traw 0x%0x", (short)a_report.y_raw, (unsigned short)a_report.y_raw);
warnx("acc z: \t%d\traw 0x%0x", (short)a_report.z_raw, (unsigned short)a_report.z_raw);
warnx("acc range: %8.4f m/s^2 (%8.4f g)", (double)a_report.range_m_s2,
(double)(a_report.range_m_s2 / 9.81f));
(double)(a_report.range_m_s2 / CONSTANTS_ONE_G));
/* do a simple demand read */
sz = read(fd_gyro, &g_report, sizeof(g_report));