refactor(drivers/rpm/pcf8583): convert params.c to module.yaml

Convert 1 parameter file(s) from legacy C format to YAML
module configuration.

src/drivers/rpm/pcf8583/CMakeLists.txt

@@ -38,6 +38,8 @@ px4_add_module(
 		PCF8583.cpp
 		PCF8583.hpp
 		pcf8583_main.cpp
+	MODULE_CONFIG
+		parameters.yaml
 	DEPENDS
 		drivers__device
 		px4_work_queue

src/drivers/rpm/pcf8583/parameters.c

@@ -1,82 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
-* PCF8583 eneable driver
-*
-* Run PCF8583 driver automatically
-*
-* @reboot_required true
-* @min 0
-* @max 1
-* @group Sensors
-* @value 0 Disabled
-* @value 1 Eneabled
-*/
-PARAM_DEFINE_INT32(SENS_EN_PCF8583, 0);
-
-
-/**
- * PCF8583 rotorfreq (i2c) pool interval
- *
- * Determines how often the sensor is read out.
- *
- * @reboot_required true
- * @group Sensors
- * @unit us
- */
-PARAM_DEFINE_INT32(PCF8583_POOL, 1000000);
-
-/**
- * PCF8583 rotorfreq (i2c) pulse reset value
- *
- * Internal device counter is reset to 0 when overrun this value,
- * counter is able to store up to 6 digits
- * reset of counter takes some time - measurement with reset has worse accuracy.
- * 0 means reset counter after every measurement.
- *
- * @reboot_required true
- * @group Sensors
- */
-PARAM_DEFINE_INT32(PCF8583_RESET, 500000);
-
-/**
- * PCF8583 rotorfreq (i2c) pulse count
- *
- * Nmumber of signals per rotation of actuator
- *
- * @reboot_required true
- * @group Sensors
- * @min 1
- */
-PARAM_DEFINE_INT32(PCF8583_MAGNET, 2);

src/drivers/rpm/pcf8583/parameters.yaml

@@ -0,0 +1,43 @@
+module_name: pcf8583
+parameters:
+- group: Sensors
+  definitions:
+    SENS_EN_PCF8583:
+      description:
+        short: PCF8583 eneable driver
+        long: Run PCF8583 driver automatically
+      type: enum
+      values:
+        0: Disabled
+        1: Eneabled
+      default: 0
+      reboot_required: true
+      min: 0
+      max: 1
+    PCF8583_POOL:
+      description:
+        short: PCF8583 rotorfreq (i2c) pool interval
+        long: Determines how often the sensor is read out.
+      type: int32
+      default: 1000000
+      reboot_required: true
+      unit: us
+    PCF8583_RESET:
+      description:
+        short: PCF8583 rotorfreq (i2c) pulse reset value
+        long: |-
+          Internal device counter is reset to 0 when overrun this value,
+          counter is able to store up to 6 digits
+          reset of counter takes some time - measurement with reset has worse accuracy.
+          0 means reset counter after every measurement.
+      type: int32
+      default: 500000
+      reboot_required: true
+    PCF8583_MAGNET:
+      description:
+        short: PCF8583 rotorfreq (i2c) pulse count
+        long: Nmumber of signals per rotation of actuator
+      type: int32
+      default: 2
+      reboot_required: true
+      min: 1