fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-25 07:23:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

Major workover of the PX4IO firmware for I2C operation.

Browse Source
This commit is contained in:
px4dev
2013-01-13 19:05:01 -08:00
parent 8ebe21b27b
commit 4e38615595
11 changed files with 561 additions and 320 deletions
Download Patch File Download Diff File Expand all files Collapse all files
apps/px4io/protocol.h
+33 -6
View File
@@ -55,7 +55,9 @@
*
* As convention, values that would be floating point in other parts of
* the PX4 system are expressed as signed integer values scaled by 10000,
* e.g. control values range from -10000..10000.
* e.g. control values range from -10000..10000. Use the REG_TO_SIGNED and
* SIGNED_TO_REG macros to convert between register representation and
* the signed version, and REG_TO_FLOAT/FLOAT_TO_REG to convert to float.
*
* Note that the implementation of readable pages prefers registers within
* readable pages to be densely packed. Page numbers do not need to be
@@ -66,6 +68,12 @@
#define PX4IO_INPUT_CHANNELS 12
#define PX4IO_RELAY_CHANNELS 4
/* Per C, this is safe for all 2's complement systems */
#define REG_TO_SIGNED(_reg) ((int16_t)(_reg))
#define SIGNED_TO_REG(_signed) ((uint16_t)(_signed))
#define REG_TO_FLOAT(_reg) ((float)REG_TO_SIGNED(_reg) / 10000.0f)
#define FLOAT_TO_REG(_float) SIGNED_TO_REG((int16_t)((_float) * 10000.0f))
/* static configuration page */
#define PX4IO_PAGE_CONFIG 0
@@ -91,13 +99,15 @@
#define PX4IO_P_STATUS_FLAGS_RC_PPM (1 << 3) /* PPM input is valid */
#define PX4IO_P_STATUS_FLAGS_RC_DSM (1 << 4) /* DSM input is valid */
#define PX4IO_P_STATUS_FLAGS_RC_SBUS (1 << 5) /* SBUS input is valid */
#define PX4IO_P_STATUS_FLAGS_FMU_OK (1 << 6) /* controls from FMU are valid */
#define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */
#define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* VBatt is very close to regulator dropout */
#define PX4IO_P_STATUS_ALARMS_TEMPERATURE (1 << 1) /* board temperature is high */
#define PX4IO_P_STATUS_ALARMS_SERVO_CURRENT (1 << 2) /* servo current limit was exceeded */
#define PX4IO_P_STATUS_ALARMS_ACC_CURRENT (1 << 3) /* accessory current limit was exceeded */
#define PX4IO_P_STATUS_ALARMS_AP_LOST (1 << 4)
#define PX4IO_P_STATUS_ALARMS_FMU_LOST (1 << 4) /* timed out waiting for controls from FMU */
#define PX4IO_P_STATUS_ALARMS_RC_LOST (1 << 5)
#define PX4IO_P_STATUS_VBATT 4 /* battery voltage in mV */
#define PX4IO_P_STATUS_TEMPERATURE 5 /* temperature in (units tbd) */
@@ -109,19 +119,26 @@
#define PX4IO_PAGE_SERVOS 3 /* 0..CONFIG_ACTUATOR_COUNT-1 */
/* array of raw RC input values, microseconds */
#define PX4IO_PAGE_RAW_RC_INPUT 4 /* 0..CONFIG_RC_INPUT_COUNT-1 */
#define PX4IO_PAGE_RAW_RC_INPUT 4
#define PX4IO_P_RAW_RC_COUNT 0 /* number of valid channels */
#define PX4IO_P_RAW_RC_BASE 1 /* CONFIG_RC_INPUT_COUNT channels from here */
/* array of scaled RC input values, -10000..10000 */
#define PX4IO_PAGE_RC_INPUT 5 /* 0..CONFIG_RC_INPUT_COUNT-1 */
#define PX4IO_PAGE_RC_INPUT 5
#define PX4IO_P_RC_VALID 0 /* bitmask of valid controls */
#define PX4IO_P_RC_BASE 1 /* CONFIG_RC_INPUT_COUNT controls from here */
/* array of raw ADC values */
#define PX4IO_PAGE_RAW_ADC_INPUT 6 /* 0..CONFIG_ADC_INPUT_COUNT-1 */
/* setup page */
#define PX4IO_PAGE_SETUP 100
#define PX4IO_P_SETUP_FEATURES 0
#define PX4IO_P_FEAT_ARMING_MANUAL_OVERRIDE_OK (1 << 0) /* OK to switch to manual override */
#define PX4IO_P_SETUP_ARMING 1 /* arming controls */
#define PX4IO_P_SETUP_ARMING_ARM_OK (1 << 0) /* OK to arm */
#define PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE (1 << 1) /* request local override */
#define PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE (1 << 2) /* request switch to manual override */
#define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */
@@ -136,7 +153,17 @@
/* raw text load to the mixer parser - ignores offset */
#define PX4IO_PAGE_MIXERLOAD 102
/* R/C channel config */
#define PX4IO_PAGE_RC_CONFIG 103 /* R/C input configuration */
#define PX4IO_P_RC_CONFIG_MIN 0 /* lowest input value */
#define PX4IO_P_RC_CONFIG_CENTER 1 /* center input value */
#define PX4IO_P_RC_CONFIG_MAX 2 /* highest input value */
#define PX4IO_P_RC_CONFIG_DEADZONE 3 /* band around center that is ignored */
#define PX4IO_P_RC_CONFIG_ASSIGNMENT 4 /* mapped input value */
#define PX4IO_P_RC_CONFIG_OPTIONS 5 /* channel options bitmask */
#define PX4IO_P_RC_CONFIG_OPTIONS_ENABLED (1 << 0)
#define PX4IO_P_RC_CONFIG_OPTIONS_REVERSE (1 << 1)
#define PX4IO_P_RC_CONFIG_STRIDE 6 /* spacing between channel config data */
/*
* Old serial PX4FMU <-> PX4IO messaging protocol.