fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-20 15:33:35 +08:00
Code Issues Packages Projects Releases Wiki Activity

Remove CONFIG_ARCH_BOARD #ifdef dependencies from mtd

Browse Source 
Since mtd already checks whether CONFIG_MTD_RAMTRON is set in
defconfig use this define to check whether to call ramtron_attach()
or at24xxx_attach() in the main function, instead of checking
CONFIG_ARCH_BOARD_PX4FMU-V1.

Also instead of using #ifdef CONFIG_ARCH_BOARD_AEROCORE to determine
whether to start mtd on spi 2 or 4, rather use a new board define
PX4_SPI_BUS_RAMTRON in the board_config.h file.
This commit is contained in:
Karl Schwabe
2015-11-13 16:30:57 +01:00
committed by Lorenz Meier
parent 199f6478ee
commit 48c467f602
3 changed files with 10 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/drivers/boards/aerocore/board_config.h
+3
View File
@@ -82,6 +82,9 @@ __BEGIN_DECLS
#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
#define GPIO_SPI_CS_BARO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
/* SPI4--Ramtron */
#define PX4_SPI_BUS_RAMTRON 4
/* Nominal chip selects for devices on SPI bus #3 */
#define PX4_SPIDEV_ACCEL_MAG 0
#define PX4_SPIDEV_GYRO 1
src/drivers/boards/px4fmu-v2/board_config.h
+1
View File
@@ -113,6 +113,7 @@ __BEGIN_DECLS
#define GPIO_SPI_CS_EXT3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
#define PX4_SPI_BUS_SENSORS 1
#define PX4_SPI_BUS_RAMTRON 2
#define PX4_SPI_BUS_EXT 4
/* Use these in place of the spi_dev_e enumeration to select a specific SPI device on SPI1 */