mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-03 14:58:53 +08:00
rc_update: remove 1% deadzone for RC channels 1-8 (#25502)
* rc_update: remove 1% deadzone for all channels
this should be handled higher level.
* Remove all references to the RC{n}_DZ parameters
Regular expression: RC.{0,2}_DZ
---------
Co-authored-by: Jacob Dahl <37091262+dakejahl@users.noreply.github.com>
This commit is contained in:
co-authored by
Jacob Dahl
parent
12035682d7
commit
4842c542b8
@@ -47,5 +47,4 @@ The mode is affected by the following parameters:
|
||||
| ----------------------------------------------------------------------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||||
| <a id="MPC_Z_VEL_MAX_UP"></a>[MPC_Z_VEL_MAX_UP](../advanced_config/parameter_reference.md#MPC_Z_VEL_MAX_UP) | Maximum vertical ascent velocity. Default: 3 m/s. |
|
||||
| <a id="MPC_Z_VEL_MAX_DN"></a>[MPC_Z_VEL_MAX_DN](../advanced_config/parameter_reference.md#MPC_Z_VEL_MAX_DN) | Maximum vertical descent velocity. Default: 1 m/s. |
|
||||
| <a id="RCX_DZ"></a>`RCX_DZ` | RC dead zone for channel X. The value of X for throttle will depend on the value of [RC_MAP_THROTTLE](../advanced_config/parameter_reference.md#RC_MAP_THROTTLE). For example, if the throttle is channel 4 then [RC4_DZ](../advanced_config/parameter_reference.md#RC4_DZ) specifies the deadzone. |
|
||||
| <a id="MPC_xxx"></a>`MPC_XXXX` | Most of the MPC_xxx parameters affect flight behaviour in this mode (at least to some extent). For example, [MPC_THR_HOVER](../advanced_config/parameter_reference.md#MPC_THR_HOVER) defines the thrust at which a vehicle will hover. |
|
||||
|
||||
Reference in New Issue
Block a user