Compiling / executing WIP on leds, leds not operational yet

nuttx-configs/px4fmu-v2/nsh/defconfig

@@ -242,6 +242,9 @@ CONFIG_STM32_ADC=y
 CONFIG_STM32_SPI=y
 CONFIG_STM32_I2C=y
 
+CONFIG_ARCH_HAVE_LEDS=y
+# CONFIG_ARCH_LEDS is not set
+
 #
 # Alternate Pin Mapping
 #
@@ -274,9 +277,9 @@ CONFIG_USART1_RXDMA=y
 # CONFIG_USART2_RS485 is not set
 CONFIG_USART2_RXDMA=y
 # CONFIG_USART3_RS485 is not set
-CONFIG_USART3_RXDMA=y
+# CONFIG_USART3_RXDMA is not set
 # CONFIG_UART4_RS485 is not set
-CONFIG_UART4_RXDMA=y
+# CONFIG_UART4_RXDMA is not set
 # CONFIG_UART5_RXDMA is not set
 # CONFIG_USART6_RS485 is not set
 # CONFIG_USART6_RXDMA is not set
@@ -284,6 +287,26 @@ CONFIG_UART4_RXDMA=y
 CONFIG_USART8_RXDMA=y
 CONFIG_STM32_USART_SINGLEWIRE=y
 
+
+# Previous:
+## CONFIG_USART1_RS485 is not set
+#CONFIG_USART1_RXDMA=y
+## CONFIG_USART2_RS485 is not set
+#CONFIG_USART2_RXDMA=y
+## CONFIG_USART3_RS485 is not set
+#CONFIG_USART3_RXDMA=y
+## CONFIG_UART4_RS485 is not set
+#CONFIG_UART4_RXDMA=y
+## CONFIG_UART5_RXDMA is not set
+## CONFIG_USART6_RS485 is not set
+## CONFIG_USART6_RXDMA is not set
+## CONFIG_USART7_RXDMA is not set
+#CONFIG_USART8_RXDMA=y
+#CONFIG_STM32_USART_SINGLEWIRE=y
+
+
+
+
 #
 # SPI Configuration
 #
@@ -525,8 +548,8 @@ CONFIG_NO_SERIAL_CONSOLE=y
 #
 # USART1 Configuration
 #
-CONFIG_USART1_RXBUFSIZE=16
+CONFIG_USART1_RXBUFSIZE=512
-CONFIG_USART1_TXBUFSIZE=16
+CONFIG_USART1_TXBUFSIZE=512
 CONFIG_USART1_BAUD=115200
 CONFIG_USART1_BITS=8
 CONFIG_USART1_PARITY=0
@@ -551,7 +574,7 @@ CONFIG_USART2_OFLOWCONTROL=y
 #
 CONFIG_USART3_RXBUFSIZE=512
 CONFIG_USART3_TXBUFSIZE=512
-CONFIG_USART3_BAUD=115200
+CONFIG_USART3_BAUD=57600
 CONFIG_USART3_BITS=8
 CONFIG_USART3_PARITY=0
 CONFIG_USART3_2STOP=0
@@ -573,9 +596,9 @@ CONFIG_UART4_2STOP=0
 #
 # USART6 Configuration
 #
-CONFIG_USART6_RXBUFSIZE=16
+CONFIG_USART6_RXBUFSIZE=256
-CONFIG_USART6_TXBUFSIZE=16
+CONFIG_USART6_TXBUFSIZE=256
-CONFIG_USART6_BAUD=115200
+CONFIG_USART6_BAUD=57600
 CONFIG_USART6_BITS=8
 CONFIG_USART6_PARITY=0
 CONFIG_USART6_2STOP=0
@@ -585,8 +608,8 @@ CONFIG_USART6_2STOP=0
 #
 # UART7 Configuration
 #
-CONFIG_UART7_RXBUFSIZE=128
+CONFIG_UART7_RXBUFSIZE=256
-CONFIG_UART7_TXBUFSIZE=128
+CONFIG_UART7_TXBUFSIZE=256
 CONFIG_UART7_BAUD=57600
 CONFIG_UART7_BITS=8
 CONFIG_UART7_PARITY=0
@@ -597,8 +620,8 @@ CONFIG_UART7_2STOP=0
 #
 # UART8 Configuration
 #
-CONFIG_UART8_RXBUFSIZE=128
+CONFIG_UART8_RXBUFSIZE=256
-CONFIG_UART8_TXBUFSIZE=128
+CONFIG_UART8_TXBUFSIZE=256
 CONFIG_UART8_BAUD=57600
 CONFIG_UART8_BITS=8
 CONFIG_UART8_PARITY=0

src/drivers/boards/px4fmuv2/module.mk

@@ -3,7 +3,7 @@
 #
 
 SRCS		 = px4fmu_can.c \
-		   px4fmu_init.c \
+		   px4fmu2_init.c \
 		   px4fmu_pwm_servo.c \
 		   px4fmu_spi.c \
 		   px4fmu_usb.c \

src/drivers/boards/px4fmuv2/px4fmu2_led.c

@@ -1,6 +1,6 @@
 /****************************************************************************
  *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions

src/drivers/led/led.cpp

@@ -1,6 +1,6 @@
 /****************************************************************************
  *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -110,7 +110,7 @@ LED	*gLED;
 }
 
 void
-drv_led_start()
+drv_led_start(void)
 {
 	if (gLED == nullptr) {
 		gLED = new LED;