fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-25 23:13:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

docs(i18n): PX4 guide translations (Crowdin) - ko (#26898)

Browse Source 
Co-authored-by: Crowdin Bot <support+bot@crowdin.com>
This commit is contained in:
PX4 Build Bot
2026-04-01 17:29:31 +11:00
committed by GitHub
co-authored by Crowdin Bot
parent 757be36ac2
commit 2e0000c8fa
34 changed files with 1524 additions and 750 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/ko/advanced_config/bootloader_update.md
+1 -1
View File
@@ -170,7 +170,7 @@ After the bootloader has updated you can [Load PX4 Firmware](../config/firmware.
## FMUv2 Bootloader Update
If _QGroundControl_ installs the FMUv2 target (see console during installation), and you have a newer board, you may need to update the bootloader in order to access all the memory on your flight controller.
This example explains how you can use [QGC Bootloader Update](qgc-bootloader-update-sys-bl-update) to update the bootloader.
This example explains how you can use [QGC Bootloader Update](#qgc-bootloader-update-sys-bl-update) to update the bootloader.
:::info
Early FMUv2 [Pixhawk-series](../flight_controller/pixhawk_series.md#fmu_versions) flight controllers had a [hardware issue](../flight_controller/silicon_errata.md#fmuv2-pixhawk-silicon-errata) that restricted them to using 1MB of flash memory.
docs/ko/advanced_config/prearm_arm_disarm.md
+22
View File
@@ -94,6 +94,28 @@ The switch can also be set as part of _QGroundControl_ [Flight Mode](../config/f
| <a id="COM_DISARM_LAND"></a>[COM_DISARM_LAND](../advanced_config/parameter_reference.md#COM_DISARM_LAND) | 착륙후 자동 시동 해제 대기 시간. 기본값: 2s (-1 비활성화). |
| <a id="COM_DISARM_PRFLT"></a>[COM_DISARM_PRFLT](../advanced_config/parameter_reference.md#COM_DISARM_PRFLT) | 이륙 속도가 너무 느리면 자동 시동 해제 시간이 초과됩니다. Default: 10s (<=0 to disable). |
## Auto-Arming on Boot
The vehicle can be configured to arm automatically on boot once all preflight checks pass,
using the `COM_ARM_ON_BOOT` parameter. For safety, PX4 enforces a minimum 5-second delay after boot before attempting to arm.
Once armed this way, the vehicle will not re-arm automatically after a manual disarm.
:::info
The parameter value is read once at boot.
Changing it while the system is running has no effect until the next reboot.
:::
:::warning
Use with caution.
A vehicle that arms automatically can spin up motors and actuators without any operator gesture.
Ensure the vehicle is in a safe state before powering on.
:::
| 매개변수 | 설명 |
| ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------- |
| <a id="COM_ARM_ON_BOOT"></a>[COM_ARM_ON_BOOT](../advanced_config/parameter_reference.md#COM_ARM_ON_BOOT) | Arm automatically once preflight checks pass after boot. Default: `0` (Disabled). |
## Pre-Arm Checks
To reduce accidents, vehicles are only allowed to arm certain conditions are met (some of which are configurable).