fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-19 07:03:33 +08:00
Code Issues Packages Projects Releases Wiki Activity

docs: fix all end of file newlines

Browse Source 
Note: Some files are autogenerated and I did not yet
go through each source of generation to fix it there.
Instead I adjusted the filter to only exclude those
such that we can fix things in steps.
This commit is contained in:
Matthias Grob
2025-06-26 11:03:23 -07:00
committed by Ramon Roche
parent e9bac962ab
commit 2bc04f91f8
90 changed files with 173 additions and 193 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/en/frames_multicopter/holybro_x500v2_pixhawk6c.md
+4 -4
View File
@@ -57,7 +57,7 @@ This topic provides full instructions for building the [Holybro X500 V2 ARF Kit]
1. To assemble the landing gear, loosen the pre-assembled screws of the Landing Gear-Cross Bar and insert the Landing Gear-Vertical Pole and fasten the same.
[![Assembly8](../../assets/airframes/multicopter/x500_v2_holybro_pixhawk6c/assembly8.png)](https://youtu.be/mU4vm4zyjcY)
[![Assembly9](../../assets/airframes/multicopter/x500_v2_holybro_pixhawk6c/assembly9.png)](https://youtu.be/7REaF3YAqLg)
1. Use the Socket Cap Screw M3*8 to screw the landing gears to the bottom plate
@@ -105,7 +105,7 @@ Note that the ESC connectors are color-coded and must be inserted in the PWM out
[![Assembly16](../../assets/airframes/multicopter/x500_v2_holybro_pixhawk6c/assembly16.png)](https://youtu.be/GOTqmjq9_3s)
1. While inserting the top plate on top of this the 3 piece assembly (bottom plate, top plate & arms) have to screwed using Socket Cap Screw M3*38 and Flange Locknut M3.
1. While inserting the top plate on top of this the 3 piece assembly (bottom plate, top plate & arms) have to screwed using Socket Cap Screw M3*38 and Flange Locknut M3.
1. Hold one side using the mini cross wrench provided in the developer kit.
[![Assembly17](../../assets/airframes/multicopter/x500_v2_holybro_pixhawk6c/assembly17.png)](https://youtu.be/2rcNVekJQd0)
@@ -133,7 +133,7 @@ The following parts can be placed as per usual.
1. Assemble the GPS by following the video.
[![Assembly20](../../assets/airframes/multicopter/x500_v2_holybro_pixhawk6c/assembly20.png)](https://youtu.be/aiFxVJFjlos)
This guide uses the GPS mount location suggested in Holybro’s guide.
1. Screw the GPS mount’s bottom end on the payload holder side using Locknut M3 & Screw M3*10
@@ -213,4 +213,4 @@ For instructions on how, start from [Auto-tune](../config/autotune_mc.md).
## Acknowledgements
This build log was contributed by Akshata and Hamish Willee with many thanks to Holybro and Dronecode for Hardware and technical support.
This build log was contributed by Akshata and Hamish Willee with many thanks to Holybro and Dronecode for Hardware and technical support.