fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-17 05:33:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

New Crowdin translations - ko

Browse Source
This commit is contained in:
Crowdin Bot
2025-07-07 09:03:49 +10:00
committed by Hamish Willee
parent 389b76bd3a
commit 29a40f37e2
163 changed files with 798 additions and 676 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/ko/frames_plane/reptile_dragon_2.md
+4 -4
View File
@@ -62,19 +62,19 @@ Key build features
- [DJI FPV Goggles](https://www.dji.com/fpv)
- [ExpressLRS Matek Diversity RX](http://www.mateksys.com/?portfolio=elrs-r24)
- [ExpressLRS Matek Diversity RX](https://www.mateksys.com/?portfolio=elrs-r24)
- [5V BEC](https://www.readymaderc.com/products/details/rmrc-3a-power-regulator-5-to-6-volt-ubec)
- [6s2p 18650 LiIon flight battery](https://www.upgradeenergytech.com/product-page/6s-22-2v-5600mah-30c-dark-lithium-liion-drone-battery) (select XT60 connector)
- [Custom designed 3D printed parts](https://github.com/PX4/PX4-user_guide/raw/main/assets/airframes/fw/reptile_dragon_2/rd2_3d_printed_parts.zip)
- [Custom designed 3D printed parts](https://github.com/PX4/PX4-Autopilot/raw/main/docs/assets/airframes/fw/reptile_dragon_2/rd2_3d_printed_parts.zip)
- ARK6X carrier mount
- Holybro Pixhawk 5x carrier mount
- FPV pod and camera mount
- Pitot static probe "plug" adapter
- [Custom designed power distribution PCB](https://github.com/PX4/PX4-user_guide/raw/main/assets/airframes/fw/reptile_dragon_2/xt30_power_distro_pcb.zip)
- [Custom designed power distribution PCB](https://github.com/PX4/PX4-Autopilot/raw/main/docs/assets/airframes/fw/reptile_dragon_2/xt30_power_distro_pcb.zip)
- Misc hardware: M3 hardware (standoffs, washers, O-rings, bolts), M2.5 nylon standoffs and screws, XT30 connectors, hot glue, heatshrink, Molex Microfit connectors
@@ -377,7 +377,7 @@ make ark_fmu-v6x_default upload
This param file contains the custom PX4 parameter configuration for this build, including radio setup, tuning and sensor config.
Load the file via QGC using the instructions at [Parameters> Tools](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/setup_view/parameters.html#tools) (QGC User Guide).
- [Snapshot of PX4 airframe params](https://github.com/PX4/PX4-user_guide/raw/main/assets/airframes/fw/reptile_dragon_2/reptile_dragon_2_params.params)
- [Snapshot of PX4 airframe params](https://github.com/PX4/PX4-Autopilot/raw/main/docs/assets/airframes/fw/reptile_dragon_2/reptile_dragon_2_params.params)
You may need to modify some parameters for your build
In particular you should check:
docs/ko/frames_plane/turbo_timber_evolution.md
+4 -4
View File
@@ -54,9 +54,9 @@ Key Build Features:
- [DJI FPV Goggles](https://www.dji.com/fpv)
- [ExpressLRS Matek Diversity RX](http://www.mateksys.com/?portfolio=elrs-r24)
- [ExpressLRS Matek Diversity RX](https://www.mateksys.com/?portfolio=elrs-r24)
- [Custom designed 3D printed parts](https://github.com/PX4/PX4-user_guide/raw/main/assets/airframes/fw/turbo_timber_evolution/3d_printed_parts.zip)
- [Custom designed 3D printed parts](https://github.com/PX4/PX4-Autopilot/raw/main/docs/assets/airframes/fw/turbo_timber_evolution/3d_printed_parts.zip)
- Pixhawk 4 Mini mount and top GPS mount
- FPV pod and camera mount
- Pitot static pod and wing hardpoint hanger
@@ -117,7 +117,7 @@ After the first flight, the lid was hot glued in place.
## Flight Computer Installation
A custom mount for the PX4 Mini was designed and 3d printed (see [3D printed parts](https://github.com/PX4/PX4-user_guide/raw/main/assets/airframes/fw/turbo_timber_evolution/3d_printed_parts.zip) for all parts).
A custom mount for the PX4 Mini was designed and 3d printed (see [3D printed parts](https://github.com/PX4/PX4-Autopilot/raw/main/docs/assets/airframes/fw/turbo_timber_evolution/3d_printed_parts.zip) for all parts).
This mount was carefully designed to use internal foam mold features of the stock TTE airframe to be securely attached and well aligned.
The mount consists of two parts in a double-decker configuration, bolted together with M3 threaded standoffs.
The bottom mount carries the Pixhawk and attaches to the airframe while the top mount carries the GPS and ExpressLRS RX.
@@ -238,7 +238,7 @@ I use full flaps on landing to slow the otherwise slippery airframe.
### Parameter File
[Snapshot of PX4 airframe params](https://github.com/PX4/PX4-user_guide/raw/main/assets/airframes/fw/turbo_timber_evolution/tteparams.params)
[Snapshot of PX4 airframe params](https://github.com/PX4/PX4-Autopilot/raw/main/docs/assets/airframes/fw/turbo_timber_evolution/tteparams.params)
This param file contains the custom PX4 parameter config for this build, including radio setup, tuning and sensor config.
The param file can be loaded via QGC using the instructions at [Parameters> Tools ](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/setup_view/parameters.html#tools) (QGC User Guide).