Resync new repository with old repo r5166

git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3

nuttx/include/nuttx/analog/adc.h

@@ -47,6 +47,7 @@
  ************************************************************************************/
 
 #include <nuttx/config.h>
+#include <nuttx/compiler.h>
 
 #include <sys/types.h>
 #include <stdint.h>
@@ -78,7 +79,7 @@ struct adc_msg_s
 {
   uint8_t      am_channel;               /* The 8-bit ADC Channel */
   int32_t      am_data;                  /* ADC convert result (4 bytes) */
-} __attribute__((__packed__));
+} packed_struct;
 
 struct adc_fifo_s
 {

nuttx/include/nuttx/compiler.h

@@ -1,7 +1,7 @@
 /****************************************************************************
  * include/nuttx/compiler.h
  *
- *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2009, 2012 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -92,6 +92,14 @@
 # define reentrant_function
 # define naked_function
 
+/* The inline_function attribute informs GCC that the function should always
+ * be inlined, regardless of the level of optimization.  The noinline_function
+ * indicates that the function should never be inlined.
+ */
+
+# define inline_function __attribute__ ((always_inline))
+# define noinline_function __attribute__ ((noinline))
+
 /* GCC has does not use storage classes to qualify addressing */
 
 # define FAR
@@ -224,10 +232,15 @@
 # define noreturn_function
 # define packed_struct
 
-/* SDCC does support "naked" function s*/
+/* SDCC does support "naked" functions */
 
 # define naked_function __naked
 
+/* SDCC does not support forced inlining. */
+
+# define inline_function
+# define noinline_function
+
 /* The reentrant attribute informs SDCC that the function
  * must be reentrant.  In this case, SDCC will store input
  * arguments on the stack to support reentrancy.
@@ -320,11 +333,13 @@
 # define weak_function
 # define weak_const_function
 
-/* The Zilog compiler does not support the noreturn, packed, or naked attributes */
+/* The Zilog compiler does not support the noreturn, packed, naked attributes */
 
 # define noreturn_function
 # define packed_struct
 # define naked_function
+# define inline_function
+# define noinline_function
 
 /* The Zilog compiler does not support the reentrant attribute */
 
@@ -406,7 +421,8 @@
 # define packed_struct
 # define reentrant_function
 # define naked_function
-
+# define inline_function
+# define noinline_function
 
 # define FAR
 # define NEAR

nuttx/include/nuttx/gran.h

@@ -92,11 +92,10 @@ extern "C" {
  *   Set up one granule allocator instance.  Allocations will be aligned to
  *   the alignment size (log2align; allocations will be in units of the
  *   granule size (log2gran). Larger granules will give better performance
- *   and less overhead but more losses of memory due to alignment
- *   quantization waste.  Additional memory waste can occur form alignment;
- *   log2align should be set to 0 unless you are using the granule allocator
- *   to manage DMA memory and your hardware has specific memory alignment
- *   requirements.
+ *   and less overhead but more losses of memory due to quantization waste.
+ *   Additional memory waste can occur from alignment; log2align should be
+ *   set to 0 unless you are using the granule allocator to manage DMA memory
+ *   and your hardware has specific memory alignment requirements.
  *
  *   Geneneral Usage Summary.  This is an example using the GCC section
  *   attribute to position a DMA heap in memory (logic in the linker script

nuttx/include/nuttx/i2c.h

@@ -1,7 +1,7 @@
 /****************************************************************************
  * include/nuttx/i2c.h
  *
- *   Copyright(C) 2009-2011 Gregory Nutt. All rights reserved.
+ *   Copyright(C) 2009-2012 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -47,6 +47,16 @@
 /****************************************************************************
  * Pre-processor Definitions
  ****************************************************************************/
+/* If a dynamic timeout is selected, then a non-negative, non-zero micro-
+ * seconds per byte vale must be provided as well.
+ */
+
+#ifdef CONFIG_STM32_I2C_DYNTIMEO
+#  if CONFIG_STM32_I2C_DYNTIMEO_USECPERBYTE < 1
+#    warning "Ignoring CONFIG_STM32_I2C_DYNTIMEO because of CONFIG_STM32_I2C_DYNTIMEO_USECPERBYTE"
+#    undef CONFIG_STM32_I2C_DYNTIMEO
+#  endif
+#endif
 
 /* I2C address calculation.  Convert 7- and 10-bit address to 8-bit and
  * 16-bit read/write address
@@ -323,7 +333,19 @@ EXTERN FAR struct i2c_dev_s *up_i2cinitialize(int port);
  *
  ****************************************************************************/
 
-EXTERN int up_i2cuninitialize(FAR struct i2c_dev_s * dev);
+EXTERN int up_i2cuninitialize(FAR struct i2c_dev_s *dev);
+
+/************************************************************************************
+ * Name: up_i2creset
+ *
+ * Description:
+ *   Reset an I2C bus
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_I2C_RESET
+EXTERN int up_i2creset(FAR struct i2c_dev_s *dev);
+#endif
 
 #undef EXTERN
 #if defined(__cplusplus)

nuttx/include/nuttx/mtd.h

@@ -220,6 +220,19 @@ EXTERN FAR struct mtd_dev_s *at24c_initialize(FAR struct i2c_dev_s *dev);
 
 EXTERN FAR struct mtd_dev_s *sst25_initialize(FAR struct spi_dev_s *dev);
 
+
+/****************************************************************************
+ * Name: w25_initialize
+ *
+ * Description:
+ *   Create an initialized MTD device instance.  MTD devices are not registered
+ *   in the file system, but are created as instances that can be bound to
+ *   other functions (such as a block or character driver front end).
+ *
+ ****************************************************************************/
+
+EXTERN FAR struct mtd_dev_s *w25_initialize(FAR struct spi_dev_s *dev);
+
 #undef EXTERN
 #ifdef __cplusplus
 }

nuttx/include/nuttx/net/enc28j60.h

@@ -85,6 +85,22 @@ struct enc_stats_s
 /* The ENC28J60 normal provides interrupts to the MCU via a GPIO pin.  The
  * following structure provides an MCU-independent mechanixm for controlling
  * the ENC28J60 GPIO interrupt.
+ *
+ * The ENC32J60 interrupt is an active low, *level* interrupt. "When an
+ * interrupt occurs, the interrupt flag is set. If the interrupt is enabled
+ * in the EIE register and the INTIE global interrupt enable bit is set, the
+ * INT pin will be driven low"
+ *
+ * "When an enabled interrupt occurs, the interrupt pin will remain low until
+ * all flags which are causing the interrupt are cleared or masked off
+ * (enable bit is cleared) by the host controller."  However, the interrupt
+ * will behave like a falling edge interrupt because "After an interrupt
+ * occurs, the host controller [clears] the global enable bit for the
+ * interrupt pin before servicing the interrupt. Clearing the enable bit
+ * will cause the interrupt pin to return to the non-asserted state (high).
+ * Doing so will prevent the host controller from missing a falling edge
+ * should another interrupt occur while the immediate interrupt is being
+ * serviced."
  */
 
 struct enc_lower_s