fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-06-27 19:20:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #1327 from PX4/termination_failsafe

Browse Source 
Termination failsafe
This commit is contained in:
Lorenz Meier
2014-09-26 14:44:03 +02:00
parent ae02b76a5e 6773eb9880
commit 1dc22cea50
6 changed files with 112 additions and 34 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/modules/px4iofirmware/mixer.cpp
+47 -27
View File
@@ -58,7 +58,7 @@ extern "C" {
/*
* Maximum interval in us before FMU signal is considered lost
*/
#define FMU_INPUT_DROP_LIMIT_US 200000
#define FMU_INPUT_DROP_LIMIT_US 500000
/* XXX need to move the RC_CHANNEL_FUNCTION out of rc_channels.h and into systemlib */
#define ROLL 0
@@ -98,7 +98,8 @@ mixer_tick(void)
{
/* check that we are receiving fresh data from the FMU */
if (hrt_elapsed_time(&system_state.fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) {
if ((system_state.fmu_data_received_time == 0) ||
hrt_elapsed_time(&system_state.fmu_data_received_time) > FMU_INPUT_DROP_LIMIT_US) {
/* too long without FMU input, time to go to failsafe */
if (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) {
@@ -109,6 +110,9 @@ mixer_tick(void)
} else {
r_status_flags |= PX4IO_P_STATUS_FLAGS_FMU_OK;
/* this flag is never cleared once OK */
r_status_flags |= PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED;
}
/* default to failsafe mixing - it will be forced below if flag is set */
@@ -139,7 +143,9 @@ mixer_tick(void)
(r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) &&
(r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) &&
!(r_setup_arming & PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED) &&
!(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK)) {
!(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) &&
/* do not enter manual override if we asked for termination failsafe and FMU is lost */
!(r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE)) {
/* if allowed, mix from RC inputs directly */
source = MIX_OVERRIDE;
@@ -154,6 +160,44 @@ mixer_tick(void)
}
}
/*
* Decide whether the servos should be armed right now.
*
* We must be armed, and we must have a PWM source; either raw from
* FMU or from the mixer.
*
*/
should_arm = (
/* IO initialised without error */ (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)
/* and IO is armed */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF)
/* and FMU is armed */ && (
((r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)
/* and there is valid input via or mixer */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) )
/* or direct PWM is set */ || (r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM)
/* or failsafe was set manually */ || ((r_setup_arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) && !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK))
)
);
should_always_enable_pwm = (r_setup_arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE)
&& (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)
&& (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK);
/*
* Check if failsafe termination is set - if yes,
* set the force failsafe flag once entering the first
* failsafe condition.
*/
if ( /* if we have requested flight termination style failsafe (noreturn) */
(r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) &&
/* and we ended up in a failsafe condition */
(source == MIX_FAILSAFE) &&
/* and we should be armed, so we intended to provide outputs */
should_arm &&
/* and FMU is initialized */
(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED)) {
r_setup_arming |= PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE;
}
/*
* Check if we should force failsafe - and do it if we have to
*/
@@ -170,30 +214,6 @@ mixer_tick(void)
r_status_flags &= ~(PX4IO_P_STATUS_FLAGS_FAILSAFE);
}
/*
* Decide whether the servos should be armed right now.
*
* We must be armed, and we must have a PWM source; either raw from
* FMU or from the mixer.
*
* XXX correct behaviour for failsafe may require an additional case
* here.
*/
should_arm = (
/* IO initialised without error */ (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)
/* and IO is armed */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF)
/* and FMU is armed */ && (
((r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)
/* and there is valid input via or mixer */ && (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK) )
/* or direct PWM is set */ || (r_status_flags & PX4IO_P_STATUS_FLAGS_RAW_PWM)
/* or failsafe was set manually */ || ((r_setup_arming & PX4IO_P_SETUP_ARMING_FAILSAFE_CUSTOM) && !(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK))
)
);
should_always_enable_pwm = (r_setup_arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE)
&& (r_status_flags & PX4IO_P_STATUS_FLAGS_INIT_OK)
&& (r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK);
/*
* Run the mixers.
*/
src/modules/px4iofirmware/protocol.h
+3 -1
View File
@@ -1,6 +1,6 @@
/****************************************************************************
*
* Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
* Copyright (c) 2012-2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -111,6 +111,7 @@
#define PX4IO_P_STATUS_FLAGS_INIT_OK (1 << 10) /* initialisation of the IO completed without error */
#define PX4IO_P_STATUS_FLAGS_FAILSAFE (1 << 11) /* failsafe is active */
#define PX4IO_P_STATUS_FLAGS_SAFETY_OFF (1 << 12) /* safety is off */
#define PX4IO_P_STATUS_FLAGS_FMU_INITIALIZED (1 << 13) /* FMU was initialized and OK once */
#define PX4IO_P_STATUS_ALARMS 3 /* alarm flags - alarms latch, write 1 to a bit to clear it */
#define PX4IO_P_STATUS_ALARMS_VBATT_LOW (1 << 0) /* [1] VBatt is very close to regulator dropout */
@@ -180,6 +181,7 @@
#define PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED (1 << 6) /* Disable the IO-internal evaluation of the RC */
#define PX4IO_P_SETUP_ARMING_LOCKDOWN (1 << 7) /* If set, the system operates normally, but won't actuate any servos */
#define PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE (1 << 8) /* If set, the system will always output the failsafe values */
#define PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE (1 << 9) /* If set, the system will never return from a failsafe, but remain in failsafe once triggered. */
#define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */
#define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */
src/modules/px4iofirmware/registers.c
+16 -2
View File
@@ -1,6 +1,6 @@
/****************************************************************************
*
* Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
* Copyright (c) 2012-2014 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@@ -190,7 +190,8 @@ volatile uint16_t r_page_setup[] =
PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE | \
PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED | \
PX4IO_P_SETUP_ARMING_LOCKDOWN | \
PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE)
PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE | \
PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE)
#define PX4IO_P_SETUP_RATES_VALID ((1 << PX4IO_SERVO_COUNT) - 1)
#define PX4IO_P_SETUP_RELAYS_VALID ((1 << PX4IO_RELAY_CHANNELS) - 1)
@@ -518,6 +519,19 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value)
r_status_flags |= PX4IO_P_STATUS_FLAGS_INIT_OK;
}
/*
* If the failsafe termination flag is set, do not allow the autopilot to unset it
*/
value |= (r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE);
/*
* If failsafe termination is enabled and force failsafe bit is set, do not allow
* the autopilot to clear it.
*/
if (r_setup_arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) {
value |= (r_setup_arming & PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE);
}
r_setup_arming = value;
break;