mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-10-23 03:43:33 +08:00
boards: add new spi+i2c config
Chip-select and SPI initialization uses the new config, whereas the drivers still use the existing defines. The configuration in board_config.h can be removed after all drivers are updated.
This commit is contained in:
Beat Küng
@@ -1,6 +1,6 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2019 PX4 Development Team. All rights reserved.
|
||||
* Copyright (C) 2020 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
@@ -31,234 +31,25 @@
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file spi.cpp
|
||||
*
|
||||
* Board-specific SPI functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <board_config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
#include <unistd.h>
|
||||
|
||||
#include <px4_arch/spi_hw_description.h>
|
||||
#include <drivers/drv_sensor.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
#include <systemlib/px4_macros.h>
|
||||
|
||||
#include <up_arch.h>
|
||||
#include <chip.h>
|
||||
#include <stm32_gpio.h>
|
||||
#include "board_config.h"
|
||||
constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
|
||||
initSPIBus(1, {
|
||||
initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortC, GPIO::Pin2}, SPI::DRDY{GPIO::PortD, GPIO::Pin15}),
|
||||
// ICM-20948
|
||||
initSPIDevice(DRV_DEVTYPE_UNUSED, SPI::CS{GPIO::PortE, GPIO::Pin15}, SPI::DRDY{GPIO::PortE, GPIO::Pin12}),
|
||||
}, {GPIO::PortE, GPIO::Pin3}),
|
||||
initSPIBus(2, {
|
||||
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortD, GPIO::Pin10}),
|
||||
initSPIDevice(DRV_DEVTYPE_DPS310, SPI::CS{GPIO::PortD, GPIO::Pin7}),
|
||||
}),
|
||||
initSPIBus(5, {
|
||||
initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin10}, SPI::DRDY{GPIO::PortF, GPIO::Pin3}),
|
||||
initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortF, GPIO::Pin6}, SPI::DRDY{GPIO::PortF, GPIO::Pin1}),
|
||||
}, {GPIO::PortE, GPIO::Pin3}),
|
||||
};
|
||||
|
||||
/* Define CS GPIO array */
|
||||
static constexpr uint32_t spi1selects_gpio[] = PX4_SPI_BUS_1_CS_GPIO;
|
||||
static constexpr uint32_t spi2selects_gpio[] = PX4_SPI_BUS_2_CS_GPIO;
|
||||
static constexpr uint32_t spi5selects_gpio[] = PX4_SPI_BUS_5_CS_GPIO;
|
||||
static constexpr bool unused = validateSPIConfig(px4_spi_buses);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_spiinitialize()
|
||||
{
|
||||
#ifdef CONFIG_STM32F7_SPI1
|
||||
|
||||
for (auto gpio : spi1selects_gpio) {
|
||||
px4_arch_configgpio(gpio);
|
||||
}
|
||||
|
||||
#endif // CONFIG_STM32F7_SPI1
|
||||
|
||||
|
||||
#if defined(CONFIG_STM32F7_SPI2)
|
||||
|
||||
for (auto gpio : spi2selects_gpio) {
|
||||
px4_arch_configgpio(gpio);
|
||||
}
|
||||
|
||||
#endif // CONFIG_STM32F7_SPI2
|
||||
|
||||
#ifdef CONFIG_STM32F7_SPI5
|
||||
|
||||
for (auto gpio : spi5selects_gpio) {
|
||||
px4_arch_configgpio(gpio);
|
||||
}
|
||||
|
||||
#endif // CONFIG_STM32F7_SPI5
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spi1select and stm32_spi1status
|
||||
*
|
||||
* Description:
|
||||
* Called by stm32 spi driver on bus 1.
|
||||
*
|
||||
************************************************************************************/
|
||||
#ifdef CONFIG_STM32F7_SPI1
|
||||
__EXPORT void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
||||
{
|
||||
ASSERT(PX4_SPI_BUS_ID(devid) == PX4_SPI_BUS_1);
|
||||
|
||||
// Making sure the other peripherals are not selected
|
||||
for (auto cs : spi1selects_gpio) {
|
||||
stm32_gpiowrite(cs, 1);
|
||||
}
|
||||
|
||||
// SPI select is active low, so write !selected to select the device
|
||||
stm32_gpiowrite(spi1selects_gpio[PX4_SPI_DEV_ID(devid)], !selected);
|
||||
}
|
||||
|
||||
__EXPORT uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif // CONFIG_STM32F7_SPI1
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spi2select and stm32_spi2status
|
||||
*
|
||||
* Description:
|
||||
* Called by stm32 spi driver on bus 2.
|
||||
*
|
||||
************************************************************************************/
|
||||
#if defined(CONFIG_STM32F7_SPI2)
|
||||
__EXPORT void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
||||
{
|
||||
if (devid == SPIDEV_FLASH(0)) {
|
||||
devid = PX4_SPIDEV_MEMORY;
|
||||
}
|
||||
|
||||
ASSERT(PX4_SPI_BUS_ID(devid) == PX4_SPI_BUS_2);
|
||||
|
||||
// Making sure the other peripherals are not selected
|
||||
for (auto cs : spi2selects_gpio) {
|
||||
stm32_gpiowrite(cs, 1);
|
||||
}
|
||||
|
||||
// SPI select is active low, so write !selected to select the device
|
||||
stm32_gpiowrite(spi2selects_gpio[PX4_SPI_DEV_ID(devid)], !selected);
|
||||
}
|
||||
|
||||
__EXPORT uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif // CONFIG_STM32F7_SPI2 && GPIO_SPI2_CS_FRAM
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spi5select and stm32_spi5status
|
||||
*
|
||||
* Description:
|
||||
* Called by stm32 spi driver on bus 5.
|
||||
*
|
||||
************************************************************************************/
|
||||
#ifdef CONFIG_STM32F7_SPI5
|
||||
__EXPORT void stm32_spi5select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
|
||||
{
|
||||
ASSERT(PX4_SPI_BUS_ID(devid) == PX4_SPI_BUS_5);
|
||||
|
||||
// Making sure the other peripherals are not selected
|
||||
for (auto cs : spi5selects_gpio) {
|
||||
stm32_gpiowrite(cs, 1);
|
||||
}
|
||||
|
||||
// SPI select is active low, so write !selected to select the device
|
||||
stm32_gpiowrite(spi5selects_gpio[PX4_SPI_DEV_ID(devid)], !selected);
|
||||
}
|
||||
|
||||
__EXPORT uint8_t stm32_spi5status(FAR struct spi_dev_s *dev, uint32_t devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif // CONFIG_STM32F7_SPI5
|
||||
|
||||
/************************************************************************************
|
||||
* Name: board_spi_reset
|
||||
*
|
||||
* Description:
|
||||
*
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void board_spi_reset(int ms)
|
||||
{
|
||||
// disable SPI bus
|
||||
|
||||
// SPI1
|
||||
for (auto cs : spi1selects_gpio) {
|
||||
stm32_configgpio(_PIN_OFF(cs));
|
||||
}
|
||||
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI1_SCK));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI1_MISO));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI1_MOSI));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI1_DRDY1_ICM20602));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI1_DRDY2_ICM20948));
|
||||
|
||||
|
||||
// SPI5
|
||||
for (auto cs : spi5selects_gpio) {
|
||||
stm32_configgpio(_PIN_OFF(cs));
|
||||
}
|
||||
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI5_SCK));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI5_MISO));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_SPI5_MOSI));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_DRDY_BMI088_INT1_ACCEL));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_DRDY_BMI088_INT2_ACCEL));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_DRDY_BMI088_INT3_GYRO));
|
||||
stm32_configgpio(_PIN_OFF(GPIO_DRDY_BMI088_INT4_GYRO));
|
||||
|
||||
/* set the sensor rail off */
|
||||
stm32_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, 0);
|
||||
|
||||
/* wait for the sensor rail to reach GND */
|
||||
usleep(ms * 1000);
|
||||
syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
|
||||
|
||||
/* re-enable power */
|
||||
|
||||
/* switch the sensor rail back on */
|
||||
stm32_gpiowrite(GPIO_VDD_3V3_SENSORS_EN, 1);
|
||||
|
||||
/* wait a bit before starting SPI, different times didn't influence results */
|
||||
usleep(100);
|
||||
|
||||
/* reconfigure the SPI pins */
|
||||
|
||||
// SPI1
|
||||
for (auto cs : spi1selects_gpio) {
|
||||
stm32_configgpio(cs);
|
||||
}
|
||||
|
||||
stm32_configgpio(GPIO_SPI1_SCK);
|
||||
stm32_configgpio(GPIO_SPI1_MISO);
|
||||
stm32_configgpio(GPIO_SPI1_MOSI);
|
||||
stm32_configgpio(GPIO_SPI1_DRDY1_ICM20602);
|
||||
stm32_configgpio(GPIO_SPI1_DRDY2_ICM20948);
|
||||
|
||||
|
||||
// SPI5
|
||||
for (auto cs : spi5selects_gpio) {
|
||||
stm32_configgpio(cs);
|
||||
}
|
||||
|
||||
stm32_configgpio(GPIO_SPI5_SCK);
|
||||
stm32_configgpio(GPIO_SPI5_MISO);
|
||||
stm32_configgpio(GPIO_SPI5_MOSI);
|
||||
stm32_configgpio(GPIO_DRDY_BMI088_INT1_ACCEL);
|
||||
stm32_configgpio(GPIO_DRDY_BMI088_INT2_ACCEL);
|
||||
stm32_configgpio(GPIO_DRDY_BMI088_INT3_GYRO);
|
||||
stm32_configgpio(GPIO_DRDY_BMI088_INT4_GYRO);
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user