diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog
index ae12f7384a..affa1b8127 100644
--- a/nuttx/ChangeLog
+++ b/nuttx/ChangeLog
@@ -2942,6 +2942,7 @@
linker scripts into one set of linker scripts at this location.
* configs/stm3210e-eval/src/up_buttons.c, up_lcd.c, and up_pm.c: New logic
for testing STM32 power management.
-
+ * configs/lincoln60: Add a configuration to support the Micromint Lincoln60
+ board.
diff --git a/nuttx/Documentation/README.html b/nuttx/Documentation/README.html
index b36b9f00c2..19e94ec753 100644
--- a/nuttx/Documentation/README.html
+++ b/nuttx/Documentation/README.html
@@ -8,7 +8,7 @@
NuttX README Files
-
Last Updated: March 24, 2012
+
Last Updated: June 29, 2012
@@ -88,7 +88,8 @@
| | | |- RIDE/README.txt
| | | |- src/README.txt
| | | `- README.txt
- | | |- kwikstik-k40/
+ | | |- lincoln60/
+ | | | `- README.txt | | |- kwikstik-k40/
| | | `- README.txt
| | |- lm3s6432-s2e/
| | | |- include/README.txt
diff --git a/nuttx/README.txt b/nuttx/README.txt
index cd7c4dda6f..2bb6b1c03d 100644
--- a/nuttx/README.txt
+++ b/nuttx/README.txt
@@ -650,6 +650,8 @@ nuttx
| | |- include/README.txt
| | |- src/README.txt
| | `- README.txt
+ | |- lincoln60/
+ | | `- README.txt
| |- kwikstik-k40/
| | `- README.txt
| |- lm3s6432-s2e/
diff --git a/nuttx/configs/Kconfig b/nuttx/configs/Kconfig
index 612f0ec1a0..843ce3c69d 100644
--- a/nuttx/configs/Kconfig
+++ b/nuttx/configs/Kconfig
@@ -115,6 +115,12 @@ config ARCH_BOARD_HYMINI_STM32V
A configuration for the HY-Mini STM32v board. This board is based on the
STM32F103VCT chip.
+config ARCH_BOARD_LINCOLN60
+ bool "Micromint Lincoln 60 board"
+ depends on ARCH_CHIP_LPC1769
+ ---help---
+ Micromint Lincoln 60 board using the NXP LPC1769 MCU.
+
config ARCH_BOARD_KWIKSTIK_K40
bool "FreeScale KwikStik-K40 development board"
depends on ARCH_CHIP_MK40X256VLQ100
diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt
index 6667d0e740..5650aafe7f 100644
--- a/nuttx/configs/README.txt
+++ b/nuttx/configs/README.txt
@@ -1436,6 +1436,9 @@ configs/kwikstik-k40.
Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40
development board.
+configs/lincoln60
+ NuttX port to the Micromint Lincoln 60 board.
+
configs/lm3s6432-s2e
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
Serial module.
diff --git a/nuttx/configs/lincoln60/Kconfig b/nuttx/configs/lincoln60/Kconfig
new file mode 100644
index 0000000000..a912484576
--- /dev/null
+++ b/nuttx/configs/lincoln60/Kconfig
@@ -0,0 +1,19 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_LINCOLN60
+config ARCH_LEDS
+ bool "NuttX LED support"
+ default n
+ ---help---
+ "Support control of board LEDs by NuttX to indicate system state"
+
+config ARCH_BUTTONS
+ bool "Button support"
+ default n
+ ---help---
+ "Support interfaces to use buttons provided by the board."
+
+endif
diff --git a/nuttx/configs/lincoln60/README.txt b/nuttx/configs/lincoln60/README.txt
new file mode 100644
index 0000000000..7a06a852bb
--- /dev/null
+++ b/nuttx/configs/lincoln60/README.txt
@@ -0,0 +1,445 @@
+README
+^^^^^^
+
+README for NuttX port to the Micromint Lincoln 60 board
+
+Contents
+^^^^^^^^
+
+ Lincoln 60 development board
+ Development Environment
+ GNU Toolchain Options
+ IDEs
+ NuttX buildroot Toolchain
+ USB Device Controller Functions
+ Lincoln 60 Configuration Options
+ USB Host Configuration
+ Configurations
+
+Lincoln 60 board
+^^^^^^^^^^^^^^^^
+
+ Memory Map
+ ----------
+
+ Block Start Length
+ Name Address
+ --------------------- ---------- ------
+ Internal flash 0x00000000 512K
+ RAM 0x10000000 32K
+ RAM1 0x2007C000 16K
+ RAM2 0x20080000 16K
+
+ GPIO Usage:
+ -----------
+
+ GPIO PIN SIGNAL NAME
+ -------------------------------- ---- --------------
+ P1[18] 32 LED1
+ P3[26] 26 LED2
+ P2[10] 53 BTN1
+
+ Console
+ -------
+
+ The Lincoln 60 has two serial connectors. The serial console defaults
+ to COM1 (UART0).
+
+Development Environment
+^^^^^^^^^^^^^^^^^^^^^^^
+
+ Either Linux or Cygwin on Windows can be used for the development environment.
+ The source has been built only using the GNU toolchain (see below). Other
+ toolchains will likely cause problems. Testing was performed using the Cygwin
+ environment.
+
+GNU Toolchain Options
+^^^^^^^^^^^^^^^^^^^^^
+
+ The NuttX make system has been modified to support the following different
+ toolchain options.
+
+ 1. The CodeSourcery GNU toolchain,
+ 2. The devkitARM GNU toolchain,
+ 3. The NuttX buildroot Toolchain (see below).
+
+ All testing has been conducted using the NuttX buildroot toolchain. However,
+ the make system is setup to default to use the devkitARM toolchain. To use
+ the CodeSourcery or devkitARM toolchain, you simply need add one of the
+ following configuration options to your .config (or defconfig) file:
+
+ CONFIG_LPC17_CODESOURCERYW=y : CodeSourcery under Windows
+ CONFIG_LPC17_CODESOURCERYL=y : CodeSourcery under Linux
+ CONFIG_LPC17_DEVKITARM=y : devkitARM under Windows
+ CONFIG_LPC17_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
+
+ If you are not using CONFIG_LPC17_BUILDROOT, then you may also have to modify
+ the PATH in the setenv.h file if your make cannot find the tools.
+
+ NOTE: the CodeSourcery (for Windows)and devkitARM are Windows native toolchains.
+ The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or
+ Linux native toolchains. There are several limitations to using a Windows based
+ toolchain in a Cygwin environment. The three biggest are:
+
+ 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
+ performed automatically in the Cygwin makefiles using the 'cygpath' utility
+ but you might easily find some new path problems. If so, check out 'cygpath -w'
+
+ 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
+ are used in Nuttx (e.g., include/arch). The make system works around these
+ problems for the Windows tools by copying directories instead of linking them.
+ But this can also cause some confusion for you: For example, you may edit
+ a file in a "linked" directory and find that your changes had no effect.
+ That is because you are building the copy of the file in the "fake" symbolic
+ directory. If you use a Windows toolchain, you should get in the habit of
+ making like this:
+
+ make clean_context all
+
+ An alias in your .bashrc file might make that less painful.
+
+ 3. Dependencies are not made when using Windows versions of the GCC. This is
+ because the dependencies are generated using Windows pathes which do not
+ work with the Cygwin make.
+
+ Support has been added for making dependencies with the windows-native toolchains.
+ That support can be enabled by modifying your Make.defs file as follows:
+
+ - MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ + MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
+
+ If you have problems with the dependency build (for example, if you are not
+ building on C:), then you may need to modify tools/mkdeps.sh
+
+ NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
+ level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
+ -Os.
+
+ NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
+ the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+ path or will get the wrong version of make.
+
+IDEs
+^^^^
+
+ NuttX is built using command-line make. It can be used with an IDE, but some
+ effort will be required to create the project (There is a simple RIDE project
+ in the RIDE subdirectory).
+
+ Makefile Build
+ --------------
+ Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+ simply use the NuttX makefile to build the system. That is almost for free
+ under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
+ makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+ there is a lot of help on the internet).
+
+ Native Build
+ ------------
+ Here are a few tips before you start that effort:
+
+ 1) Select the toolchain that you will be using in your .config file
+ 2) Start the NuttX build at least one time from the Cygwin command line
+ before trying to create your project. This is necessary to create
+ certain auto-generated files and directories that will be needed.
+ 3) Set up include pathes: You will need include/, arch/arm/src/lpc17xx,
+ arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
+ 4) All assembly files need to have the definition option -D __ASSEMBLY__
+ on the command line.
+
+ Startup files will probably cause you some headaches. The NuttX startup file
+ is arch/arm/src/lpc17x/lpc17_vectors.S.
+
+NuttX buildroot Toolchain
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ A GNU GCC-based toolchain is assumed. The files */setenv.sh should
+ be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+ different from the default in your PATH variable).
+
+ If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+ SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
+ This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+ 1. You must have already configured Nuttx in /nuttx.
+
+ cd tools
+ ./configure.sh lincoln60/
+
+ 2. Download the latest buildroot package into
+
+ 3. unpack the buildroot tarball. The resulting directory may
+ have versioning information on it like buildroot-x.y.z. If so,
+ rename /buildroot-x.y.z to /buildroot.
+
+ 4. cd /buildroot
+
+ 5. cp configs/cortexm3-defconfig-4.3.3 .config
+
+ 6. make oldconfig
+
+ 7. make
+
+ 8. Edit setenv.h, if necessary, so that the PATH variable includes
+ the path to the newly built binaries.
+
+ See the file configs/README.txt in the buildroot source tree. That has more
+ detailed PLUS some special instructions that you will need to follow if you
+ are building a Cortex-M3 toolchain for Cygwin under Windows.
+
+ NOTE: This is an OABI toolchain.
+
+Lincoln 60 Configuration Options
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ CONFIG_ARCH - Identifies the arch/ subdirectory. This should
+ be set to:
+
+ CONFIG_ARCH=arm
+
+ CONFIG_ARCH_family - For use in C code:
+
+ CONFIG_ARCH_ARM=y
+
+ CONFIG_ARCH_architecture - For use in C code:
+
+ CONFIG_ARCH_CORTEXM3=y
+
+ CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+ CONFIG_ARCH_CHIP=lpc17xx
+
+ CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+ chip:
+
+ CONFIG_ARCH_CHIP_LPC1768=y
+
+ CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+ hence, the board that supports the particular chip or SoC.
+
+ CONFIG_ARCH_BOARD=lincoln60 (for the Lincoln 60 board)
+
+ CONFIG_ARCH_BOARD_name - For use in C code
+
+ CONFIG_ARCH_BOARD_LINCOLN60=y
+
+ CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+ of delay loops
+
+ CONFIG_ENDIAN_BIG - define if big endian (default is little
+ endian)
+
+ CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
+
+ CONFIG_DRAM_SIZE=(32*1024) (32Kb)
+
+ There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
+
+ CONFIG_DRAM_START - The start address of installed DRAM
+
+ CONFIG_DRAM_START=0x10000000
+
+ CONFIG_DRAM_END - Last address+1 of installed RAM
+
+ CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+
+ CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
+
+ CONFIG_ARCH_IRQPRIO=y
+
+ CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+ have LEDs
+
+ CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+ stack. If defined, this symbol is the size of the interrupt
+ stack in bytes. If not defined, the user task stacks will be
+ used during interrupt handling.
+
+ CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+ CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+
+ CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+ cause a 100 second delay during boot-up. This 100 second delay
+ serves no purpose other than it allows you to calibratre
+ CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
+ the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+ the delay actually is 100 seconds.
+
+ Individual subsystems can be enabled:
+ CONFIG_LPC17_MAINOSC=y
+ CONFIG_LPC17_PLL0=y
+ CONFIG_LPC17_PLL1=n
+ CONFIG_LPC17_ETHERNET=n
+ CONFIG_LPC17_USBHOST=n
+ CONFIG_LPC17_USBOTG=n
+ CONFIG_LPC17_USBDEV=n
+ CONFIG_LPC17_UART0=y
+ CONFIG_LPC17_UART1=n
+ CONFIG_LPC17_UART2=n
+ CONFIG_LPC17_UART3=n
+ CONFIG_LPC17_CAN1=n
+ CONFIG_LPC17_CAN2=n
+ CONFIG_LPC17_SPI=n
+ CONFIG_LPC17_SSP0=n
+ CONFIG_LPC17_SSP1=n
+ CONFIG_LPC17_I2C0=n
+ CONFIG_LPC17_I2C1=n
+ CONFIG_LPC17_I2S=n
+ CONFIG_LPC17_TMR0=n
+ CONFIG_LPC17_TMR1=n
+ CONFIG_LPC17_TMR2=n
+ CONFIG_LPC17_TMR3=n
+ CONFIG_LPC17_RIT=n
+ CONFIG_LPC17_PWM=n
+ CONFIG_LPC17_MCPWM=n
+ CONFIG_LPC17_QEI=n
+ CONFIG_LPC17_RTC=n
+ CONFIG_LPC17_WDT=n
+ CONFIG_LPC17_ADC=n
+ CONFIG_LPC17_DAC=n
+ CONFIG_LPC17_GPDMA=n
+ CONFIG_LPC17_FLASH=n
+
+ LPC17xx specific device driver settings
+
+ CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+ console and ttys0 (default is the UART0).
+ CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+ This specific the size of the receive buffer
+ CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+ being sent. This specific the size of the transmit buffer
+ CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+ CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+ CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+ CONFIG_UARTn_2STOP - Two stop bits
+
+ LPC17xx specific CAN device driver settings. These settings all
+ require CONFIG_CAN:
+
+ CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default
+ Standard 11-bit IDs.
+ CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC17_CAN1 is defined.
+ CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_LPC17_CAN2 is defined.
+ CONFIG_CAN1_DIVISOR - CAN1 is clocked at CCLK divided by this number.
+ (the CCLK frequency is divided by this number to get the CAN clock).
+ Options = {1,2,4,6}. Default: 4.
+ CONFIG_CAN2_DIVISOR - CAN2 is clocked at CCLK divided by this number.
+ (the CCLK frequency is divided by this number to get the CAN clock).
+ Options = {1,2,4,6}. Default: 4.
+ CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
+ CONFIG_CAN_TSEG2 = the number of CAN time quanta in segment 2. Default: 7
+
+ LPC17xx specific PHY/Ethernet device driver settings. These setting
+ also require CONFIG_NET and CONFIG_LPC17_ETHERNET.
+
+ CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+ CONFIG_PHY_AUTONEG - Enable auto-negotion
+ CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+ CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+
+ CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb
+ CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+ CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+ CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is
+ the higest priority.
+ CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+ CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
+ CONFIG_DEBUG.
+ CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets.
+ Also needs CONFIG_DEBUG.
+ CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+ CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+ Automatically set if CONFIG_NET_IGMP is selected.
+
+ LPC17xx USB Device Configuration
+
+ CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+ Handle USB Start-Of-Frame events.
+ Enable reading SOF from interrupt handler vs. simply reading on demand.
+ Probably a bad idea... Unless there is some issue with sampling the SOF
+ from hardware asynchronously.
+ CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+ Enable high priority interrupts. I have no idea why you might want to
+ do that
+ CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+ Number of DMA descriptors to allocate in SRAM.
+ CONFIG_LPC17_USBDEV_DMA
+ Enable lpc17xx-specific DMA support
+ CONFIG_LPC17_USBDEV_NOVBUS
+ Define if the hardware implementation does not support the VBUS signal
+ CONFIG_LPC17_USBDEV_NOLED
+ Define if the hardware implementation does not support the LED output
+
+ LPC17xx USB Host Configuration
+
+ CONFIG_USBHOST_OHCIRAM_SIZE
+ Total size of OHCI RAM (in AHB SRAM Bank 1)
+ CONFIG_USBHOST_NEDS
+ Number of endpoint descriptors
+ CONFIG_USBHOST_NTDS
+ Number of transfer descriptors
+ CONFIG_USBHOST_TDBUFFERS
+ Number of transfer descriptor buffers
+ CONFIG_USBHOST_TDBUFSIZE
+ Size of one transfer descriptor buffer
+ CONFIG_USBHOST_IOBUFSIZE
+ Size of one end-user I/O buffer. This can be zero if the
+ application can guarantee that all end-user I/O buffers
+ reside in AHB SRAM.
+
+USB Host Configuration
+^^^^^^^^^^^^^^^^^^^^^^
+
+The Lincoln 60 board supports a USB host interface. The hidkbd
+example can be used to test this interface.
+
+The NuttShell (NSH) lincoln60 can also be modified in order to support USB
+host operations. To make these modifications, do the following:
+
+1. First configure to build the NSH configuration from the top-level
+ NuttX directory:
+
+ cd tools
+ ./configure lincoln60/nsh
+ cd ..
+
+2. Then edit the top-level .config file to enable USB host. Make the
+ following changes:
+
+ CONFIG_LPC17_USBHOST=n
+ CONFIG_USBHOST=n
+ CONFIG_SCHED_WORKQUEUE=y
+
+When this change is made, NSH should be extended to support USB flash
+devices. When a FLASH device is inserted, you should see a device
+appear in the /dev (psuedo) directory. The device name should be
+like /dev/sda, /dev/sdb, etc. The USB mass storage device, is present
+it can be mounted from the NSH command line like:
+
+ ls /dev
+ mount -t vfat /dev/sda /mnt/flash
+
+Files on the connect USB flash device should then be accessible under
+the mountpoint /mnt/flash.
+
+Configurations
+^^^^^^^^^^^^^^
+
+Each Lincoln 60 configuration is maintained in a sudirectory and can be selected
+as follow:
+
+ cd tools
+ ./configure.sh lincoln60/
+ cd -
+ . ./setenv.sh
+
+Where is one of the following:
+
+ ostest:
+ Builds the NuttX OS test at apps/examples/ostest.
+
+ nsh:
+ Configures the NuttShell (nsh) located at apps/examples/nsh. The
+ Configuration enables only the serial NSH interfaces. See notes
+ above for enabling USB host support in this configuration.
diff --git a/nuttx/configs/lincoln60/include/board.h b/nuttx/configs/lincoln60/include/board.h
new file mode 100644
index 0000000000..b616689ece
--- /dev/null
+++ b/nuttx/configs/lincoln60/include/board.h
@@ -0,0 +1,222 @@
+/****************************************************************************
+ * configs/lincoln60/include/board.h
+ * include/arch/board/board.h
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+#include
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
+# include
+#endif
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Clocking ****************************************************************/
+/* NOTE: The following definitions require lpc17_syscon.h. It is not included here
+ * because the including C file may not have that file in its include path.
+ */
+
+#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
+#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
+#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */
+#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
+
+/* This is the clock setup we configure for:
+ *
+ * SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source
+ * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1
+ * CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
+ */
+
+#define LPC17_CCLK 80000000 /* 80Mhz*/
+
+/* Select the main oscillator as the frequency source. SYSCLK is then the frequency
+ * of the main oscillator.
+ */
+
+#undef CONFIG_LPC17_MAINOSC
+#define CONFIG_LPC17_MAINOSC 1
+#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
+
+/* Select the main oscillator and CCLK divider. The output of the divider is CCLK.
+ * The input to the divider (PLLCLK) will be determined by the PLL output.
+ */
+
+#define BOARD_CCLKCFG_DIVIDER 6
+#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
+
+/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
+ *
+ * Source clock: Main oscillator
+ * PLL0 Multiplier value (M): 20
+ * PLL0 Pre-divider value (N): 1
+ *
+ * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
+ */
+
+#undef CONFIG_LPC17_PLL0
+#define CONFIG_LPC17_PLL0 1
+#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
+
+#define BOARD_PLL0CFG_MSEL 20
+#define BOARD_PLL0CFG_NSEL 1
+#define BOARD_PLL0CFG_VALUE \
+ (((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
+ ((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
+
+/* PLL1 -- Not used. */
+
+#undef CONFIG_LPC17_PLL1
+#define BOARD_PLL1CFG_MSEL 36
+#define BOARD_PLL1CFG_NSEL 1
+#define BOARD_PLL1CFG_VALUE \
+ (((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
+ ((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
+
+/* USB divider. This divider is used when PLL1 is not enabled to get the
+ * USB clock from PLL0:
+ *
+ * USBCLK = PLL0CLK / 10 = 48MHz
+ */
+
+#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
+
+/* FLASH Configuration */
+
+#undef CONFIG_LP17_FLASH
+#define CONFIG_LP17_FLASH 1
+#define BOARD_FLASHCFG_VALUE 0x0000303a
+
+/* LED definitions *********************************************************/
+/* The Lincoln 60 has 2 LEDs along the bottom of the board. Green or off.
+ * If CONFIG_ARCH_LEDS is defined, the LEDs will be controlled as follows
+ * for NuttX debug functionality (where NC means "No Change").
+ *
+ * During the boot phases. LED1 and LED2 will show boot status.
+ */
+ /* LED1 LED2 */
+#define LED_STARTED 0 /* OFF OFF */
+#define LED_HEAPALLOCATE 1 /* GREEN OFF */
+#define LED_IRQSENABLED 2 /* OFF GREEN */
+#define LED_STACKCREATED 3 /* OFF OFF */
+
+/* After the system is booted, this logic will no longer use LEDs 1 & 2.
+ * They are available for use the application software using lpc17_led
+ * (prototyped below)
+ */
+ /* LED1 LED2 LED3 LED4 */
+#define LED_INIRQ 4 /* NC NC NC ON (momentary) */
+#define LED_SIGNAL 5 /* NC NC NC ON (momentary) */
+#define LED_ASSERTION 6 /* NC NC NC ON (momentary) */
+#define LED_PANIC 7 /* NC NC NC ON (1Hz flashing) */
+
+#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
+#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1
+#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1
+#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1
+
+/* We need to redefine USB_PWRD as GPIO to get USB Host working
+ * Also remember to add 2 resistors of 15K to D+ and D- pins.
+ */
+
+#ifdef CONFIG_USBHOST
+# ifdef GPIO_USB_PWRD
+# undef GPIO_USB_PWRD
+# define GPIO_USB_PWRD (GPIO_INPUT | GPIO_PORT1 | GPIO_PIN22)
+# endif
+#endif
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ * All LPC17xx architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ****************************************************************************/
+
+EXTERN void lpc17_boardinitialize(void);
+
+/****************************************************************************
+ * Name: lpc17_led
+ *
+ * Description:
+ * Once the system has booted, these functions can be used to control LEDs 1 & 2
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+EXTERN void lpc17_led(int lednum, int state);
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ARCH_BOARD_BOARD_H */
diff --git a/nuttx/configs/lincoln60/nsh/Make.defs b/nuttx/configs/lincoln60/nsh/Make.defs
new file mode 100644
index 0000000000..61c5d281a6
--- /dev/null
+++ b/nuttx/configs/lincoln60/nsh/Make.defs
@@ -0,0 +1,162 @@
+############################################################################
+# configs/lincoln60/nsh/Make.defs
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
+ # CodeSourcery under Windows
+ CROSSDEV = arm-none-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
+ # CodeSourcery under Linux
+ CROSSDEV = arm-none-eabi-
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+ MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LPC17_DEVKITARM),y)
+ # devkitARM under Windows
+ CROSSDEV = arm-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_BUILDROOT),y)
+ # NuttX buildroot under Linux or Cygwin
+ CROSSDEV = arm-elf-
+ ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+ MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/winlink.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
+ MAXOPTIMIZATION = -O2
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+define PREPROCESS
+ @echo "CPP: $1->$2"
+ @$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+ @echo "CC: $1"
+ @$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+ @echo "CXX: $1"
+ @$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+ @echo "AS: $1"
+ @$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+ echo "AR: $2"; \
+ $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+ @rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/lincoln60/nsh/appconfig b/nuttx/configs/lincoln60/nsh/appconfig
new file mode 100644
index 0000000000..c18668cc44
--- /dev/null
+++ b/nuttx/configs/lincoln60/nsh/appconfig
@@ -0,0 +1,44 @@
+############################################################################
+# configs/lincoln60/nsh/appconfig
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS += examples/nsh
+
+# The NSH Library
+
+CONFIGURED_APPS += system/readline
+CONFIGURED_APPS += nshlib
+
diff --git a/nuttx/configs/lincoln60/nsh/defconfig b/nuttx/configs/lincoln60/nsh/defconfig
new file mode 100644
index 0000000000..1aec842782
--- /dev/null
+++ b/nuttx/configs/lincoln60/nsh/defconfig
@@ -0,0 +1,821 @@
+############################################################################
+# configs/lincoln60/nsh/defconfig
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+# processor architecture.
+# CONFIG_ARCH_family - for use in C code. This identifies the
+# particular chip family that the architecture is implemented
+# in.
+# CONFIG_ARCH_architecture - for use in C code. This identifies the
+# specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+# the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+# stack. If defined, this symbol is the size of the interrupt
+# stack in bytes. If not defined, the user task stacks will be
+# used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+# cause a 100 second delay during boot-up. This 100 second delay
+# serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
+# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+# the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lpc17xx
+CONFIG_ARCH_CHIP_LPC1769=y
+CONFIG_ARCH_BOARD=lincoln60
+CONFIG_ARCH_BOARD_LINCOLN60=y
+CONFIG_BOARD_LOOPSPERMSEC=7982
+CONFIG_DRAM_SIZE=(32*1024)
+CONFIG_DRAM_START=0x10000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LPC17_CODESOURCERYW=n
+CONFIG_LPC17_CODESOURCERYL=y
+CONFIG_LPC17_DEVKITARM=n
+CONFIG_LPC17_BUILDROOT=n
+
+#
+# Individual subsystems can be enabled:
+#
+# Individual subsystems can be enabled:
+# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+CONFIG_LPC17_ETHERNET=n
+CONFIG_LPC17_USBHOST=n
+CONFIG_LPC17_USBOTG=n
+CONFIG_LPC17_USBDEV=n
+CONFIG_LPC17_UART0=y
+CONFIG_LPC17_UART1=n
+CONFIG_LPC17_UART2=n
+CONFIG_LPC17_UART3=n
+CONFIG_LPC17_CAN1=n
+CONFIG_LPC17_CAN2=n
+CONFIG_LPC17_SPI=n
+CONFIG_LPC17_SSP0=y
+CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_I2C0=n
+CONFIG_LPC17_I2C1=n
+CONFIG_LPC17_I2S=n
+CONFIG_LPC17_TMR0=n
+CONFIG_LPC17_TMR1=n
+CONFIG_LPC17_TMR2=n
+CONFIG_LPC17_TMR3=n
+CONFIG_LPC17_RIT=n
+CONFIG_LPC17_PWM=n
+CONFIG_LPC17_MCPWM=n
+CONFIG_LPC17_QEI=n
+CONFIG_LPC17_RTC=n
+CONFIG_LPC17_WDT=n
+CONFIG_LPC17_ADC=n
+CONFIG_LPC17_DAC=n
+CONFIG_LPC17_GPDMA=n
+
+#
+# LPC17xx specific serial device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+# console and ttys0 (default is the UART1).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+# This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+# being sent. This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART3_BAUD=115200
+CONFIG_UART1_BAUD=115200
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb
+# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is
+# the higest priority.
+# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
+# CONFIG_DEBUG.
+# CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+# Automatically set if CONFIG_NET_IGMP is selected.
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+# BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+# different loaders using the GNU objcopy program. This option
+# should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+# that builds the application to link with NuttX. Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+# debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+# regions of memory to allocate from, this specifies the
+# number of memory regions that the memory manager must
+# handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+# time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+# or MSEC_PER_TICK=10. This setting may be defined to
+# inform NuttX that the processor hardware is providing
+# system timer interrupts at some interrupt interval other
+# than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+# this number of milliseconds; Round robin scheduling can
+# be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
+# scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+# task name to save in the TCB. Useful if scheduler
+# instrumentation is selected. Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+# Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+# You would only need this if you are concerned about accurate
+# time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+# would only need this if you are concerned about accurate
+# time conversion in the distand past. You must also define
+# CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+# provides /dev/console. Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+# driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+# errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+# inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+# inheritance is enabled. It defines the maximum number of
+# different threads (minus one) that can take counts on a
+# semaphore with priority inheritance support. This may be
+# set to zero if priority inheritance is disabled OR if you
+# are only using semaphores as mutexes (only one holder) OR
+# if no more than two threads participate using a counting
+# semaphore.
+# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
+# then this setting is the maximum number of higher priority
+# threads (minus 1) than can be waiting for another thread
+# to release a count on a semaphore. This value may be set
+# to zero if no more than one thread is expected to wait for
+# a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+# by task_create() when a new task is started. If set, all
+# files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+# three file descriptors (stdin, stdout, stderr) by task_create()
+# when a new task is started. If set, all files/drivers will
+# appear to be closed in the new task except for stdin, stdout,
+# and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+# desciptors by task_create() when a new task is started. If
+# set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+# This format will support execution of NuttX binaries located
+# in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
+# handle delayed processing from interrupt handlers. This feature
+# is required for some drivers but, if there are not complaints,
+# can be safely disabled. The worker thread also performs
+# garbage collection -- completing any delayed memory deallocations
+# from interrupt handlers. If the worker thread is disabled,
+# then that clean will be performed by the IDLE thread instead
+# (which runs at the lowest of priority and may not be appropriate
+# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
+# is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+# thread. Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+# work in units of microseconds. Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+# the worker thread. Default: 4
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=6
+CONFIG_START_DAY=20
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS. If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+# waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+# up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+# little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+# active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+# of parameters that a task may receive (i.e., maxmum value
+# of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+# specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+# descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+# can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+# structures. The system manages a pool of preallocated
+# message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+# a fixed payload size given by this settin (does not include
+# other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+# can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+# structures. The system manages a pool of preallocated
+# watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+# timer structures. The system manages a pool of preallocated
+# timer structures to minimize dynamic allocations. Set to
+# zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=y
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+# Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+# Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+# Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+# Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+# Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+# SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+# Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+# SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+# accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+# Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+# Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+# Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+# Will cause USB features to indicate that the device is
+# self-powered
+# CONFIG_USBDEV_MAXPOWER
+# Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+# Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+# Number of trace entries to remember
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# LPC17xx USB Configuration
+#
+# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+# Handle USB Start-Of-Frame events.
+# Enable reading SOF from interrupt handler vs. simply reading on demand.
+# Probably a bad idea... Unless there is some issue with sampling the SOF
+# from hardware asynchronously.
+# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+# Enable high priority interrupts. I have no idea why you might want to
+# do that
+# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+# Number of DMA descriptors to allocate in SRAM.
+# CONFIG_LPC17_USBDEV_DMA
+# Enable lpc17xx-specific DMA support
+#
+CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
+CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
+CONFIG_LPC17_USBDEV_DMA=n
+CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
+CONFIG_LPC17_USBDEV_DMAINTMASK=0
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_PL2303
+# Enable compilation of the USB serial driver
+# CONFIG_PL2303_EPINTIN
+# The logical 7-bit address of a hardware endpoint that supports
+# interrupt IN operation
+# CONFIG_PL2303_EPBULKOUT
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk OUT operation
+# CONFIG_PL2303_EPBULKIN
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk IN operation
+# # CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR
+# The vendor ID code/string
+# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR
+# The product ID code/string
+# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE
+# Size of the serial receive/transmit buffers
+#
+CONFIG_PL2303=n
+CONFIG_PL2303_EPINTIN=1
+CONFIG_PL2303_EPBULKOUT=2
+CONFIG_PL2303_EPBULKIN=5
+CONFIG_PL2303_NWRREQS=4
+CONFIG_PL2303_NRDREQS=4
+CONFIG_PL2303_VENDORID=0x067b
+CONFIG_PL2303_PRODUCTID=0x2303
+CONFIG_PL2303_VENDORSTR="Nuttx"
+CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
+CONFIG_PL2303_RXBUFSIZE=512
+CONFIG_PL2303_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBMSC
+# Enable compilation of the USB storage driver
+# CONFIG_USBMSC_EP0MAXPACKET
+# Max packet size for endpoint 0
+# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN
+# The logical 7-bit address of a hardware endpoints that support
+# bulk OUT and IN operations
+# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN
+# The size of the buffer in each write/read request. This
+# value needs to be at least as large as the endpoint
+# maxpacket and ideally as large as a block device sector.
+# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBMSC_REMOVABLE
+# Select if the media is removable
+#
+CONFIG_USBMSC=n
+CONFIG_USBMSC_EP0MAXPACKET=64
+CONFIG_USBMSC_EPBULKOUT=2
+CONFIG_USBMSC_EPBULKIN=5
+CONFIG_USBMSC_NRDREQS=2
+CONFIG_USBMSC_NWRREQS=2
+CONFIG_USBMSC_BULKINREQLEN=256
+CONFIG_USBMSC_BULKOUTREQLEN=256
+CONFIG_USBMSC_VENDORID=0x584e
+CONFIG_USBMSC_VENDORSTR="NuttX"
+CONFIG_USBMSC_PRODUCTID=0x5342
+CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
+CONFIG_USBMSC_VERSIONNO=0x0399
+CONFIG_USBMSC_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+# specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+# Only verify IN (device-to-host) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+# Only verify OUT (host-to-device) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+# Send only small, single packet messages. Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+# Send only large, multi-packet messages. Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+# operation from FLASH but must copy initialized .data sections to RAM.
+# (should also be =n for the LPC17xx which always runs from flash)
+# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
+# but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+# all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+# This is the thread that (1) performs the inital boot of the system up
+# to the point where user_start() is spawned, and (2) there after is the
+# IDLE thread that executes only when there is no other thread ready to
+# run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+# for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+#CONFIG_STACK_POINTER
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx/configs/lincoln60/nsh/setenv.sh b/nuttx/configs/lincoln60/nsh/setenv.sh
new file mode 100755
index 0000000000..ef3ca7f676
--- /dev/null
+++ b/nuttx/configs/lincoln60/nsh/setenv.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+# configs/lincoln60/nsh/setenv.sh
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+ echo "This script must be executed from the top-level NuttX build directory"
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+ export PATH_ORIG="${PATH}"
+fi
+
+# TOOLCHAIN_BIN must be defined to the full path to the location where you
+# have installed the toolchain of your choice. Modify the following:
+
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Andd add the toolchain path to the PATH variable
+
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/lincoln60/ostest/Make.defs b/nuttx/configs/lincoln60/ostest/Make.defs
new file mode 100644
index 0000000000..44d3ded238
--- /dev/null
+++ b/nuttx/configs/lincoln60/ostest/Make.defs
@@ -0,0 +1,162 @@
+############################################################################
+# configs/lincoln60/ostest/Make.defs
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
+ # CodeSourcery under Windows
+ CROSSDEV = arm-none-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
+ # CodeSourcery under Linux
+ CROSSDEV = arm-none-eabi-
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+ MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LPC17_DEVKITARM),y)
+ # devkitARM under Windows
+ CROSSDEV = arm-eabi-
+ WINTOOL = y
+ ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LPC17_BUILDROOT),y)
+ # NuttX buildroot under Linux or Cygwin
+ CROSSDEV = arm-elf-
+ ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+ MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/winlink.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
+ MAXOPTIMIZATION = -O2
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+ ARCHOPTIMIZATION = -g
+else
+ ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+define PREPROCESS
+ @echo "CPP: $1->$2"
+ @$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+ @echo "CC: $1"
+ @$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+ @echo "CXX: $1"
+ @$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+ @echo "AS: $1"
+ @$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+ echo "AR: $2"; \
+ $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+ @rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/lincoln60/ostest/appconfig b/nuttx/configs/lincoln60/ostest/appconfig
new file mode 100644
index 0000000000..678b5e7bc9
--- /dev/null
+++ b/nuttx/configs/lincoln60/ostest/appconfig
@@ -0,0 +1,39 @@
+############################################################################
+# configs/lincoln60/ostest/appconfig
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS += examples/ostest
+
diff --git a/nuttx/configs/lincoln60/ostest/defconfig b/nuttx/configs/lincoln60/ostest/defconfig
new file mode 100644
index 0000000000..6be405482e
--- /dev/null
+++ b/nuttx/configs/lincoln60/ostest/defconfig
@@ -0,0 +1,949 @@
+############################################################################
+# configs/lincoln60/ostest/defconfig
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+# processor architecture.
+# CONFIG_ARCH_family - for use in C code. This identifies the
+# particular chip family that the architecture is implemented
+# in.
+# CONFIG_ARCH_architecture - for use in C code. This identifies the
+# specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+# the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+# stack. If defined, this symbol is the size of the interrupt
+# stack in bytes. If not defined, the user task stacks will be
+# used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
+# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+# cause a 100 second delay during boot-up. This 100 second delay
+# serves no purpose other than it allows you to calibrate
+# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
+# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+# the delay actually is 100 seconds.
+# CONFIG_ARCH_DMA - Support DMA initialization
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lpc17xx
+CONFIG_ARCH_CHIP_LPC1769=y
+CONFIG_ARCH_BOARD=lincoln60
+CONFIG_ARCH_BOARD_LINCOLN60=y
+CONFIG_BOARD_LOOPSPERMSEC=8111
+CONFIG_DRAM_SIZE=(32*1024)
+CONFIG_DRAM_START=0x10000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_BOOTLOADER=n
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_BUTTONS=n
+CONFIG_ARCH_CALIBRATION=n
+CONFIG_ARCH_DMA=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LPC17_CODESOURCERYW=n
+CONFIG_LPC17_CODESOURCERYL=y
+CONFIG_LPC17_DEVKITARM=n
+CONFIG_LPC17_BUILDROOT=n
+
+#
+# Individual subsystems can be enabled:
+#
+# Individual subsystems can be enabled:
+# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
+#
+CONFIG_LPC17_ETHERNET=n
+CONFIG_LPC17_USBHOST=n
+CONFIG_LPC17_USBOTG=n
+CONFIG_LPC17_USBDEV=n
+CONFIG_LPC17_UART0=y
+CONFIG_LPC17_UART1=n
+CONFIG_LPC17_UART2=n
+CONFIG_LPC17_UART3=n
+CONFIG_LPC17_CAN1=n
+CONFIG_LPC17_CAN2=n
+CONFIG_LPC17_SPI=n
+CONFIG_LPC17_SSP0=n
+CONFIG_LPC17_SSP1=n
+CONFIG_LPC17_I2C0=n
+CONFIG_LPC17_I2C1=n
+CONFIG_LPC17_I2S=n
+CONFIG_LPC17_TMR0=n
+CONFIG_LPC17_TMR1=n
+CONFIG_LPC17_TMR2=n
+CONFIG_LPC17_TMR3=n
+CONFIG_LPC17_RIT=n
+CONFIG_LPC17_PWM=n
+CONFIG_LPC17_MCPWM=n
+CONFIG_LPC17_QEI=n
+CONFIG_LPC17_RTC=n
+CONFIG_LPC17_WDT=n
+CONFIG_LPC17_ADC=n
+CONFIG_LPC17_DAC=n
+CONFIG_LPC17_GPDMA=n
+
+#
+# LPC17xx Button interrupt support
+#
+CONFIG_GPIO_IRQ=n
+CONFIG_ARCH_IRQBUTTONS=n
+
+#
+# LPC17xx specific serial device driver settings
+#
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+# console and ttys0 (default is the UART1).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+# This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+# being sent. This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
+# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_UART1_SERIAL_CONSOLE=n
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART3_SERIAL_CONSOLE=n
+
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART3_TXBUFSIZE=256
+
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART3_RXBUFSIZE=256
+
+CONFIG_UART0_BAUD=57600
+CONFIG_UART2_BAUD=57600
+CONFIG_UART3_BAUD=57600
+CONFIG_UART1_BAUD=57600
+
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART3_BITS=8
+
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART3_PARITY=0
+
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+CONFIG_UART3_2STOP=0
+
+#
+# LPC17xx specific PHY/Ethernet device driver settings
+#
+# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY
+# CONFIG_PHY_AUTONEG - Enable auto-negotion
+# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed.
+# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex
+# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb
+# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18
+# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18
+# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is
+# the higest priority.
+# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented).
+# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs
+# CONFIG_DEBUG.
+# CONFIG_NET_HASH - Enable receipt of near-perfect match frames.
+# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames.
+# Automatically set if CONFIG_NET_IGMP is selected.
+#
+CONFIG_PHY_KS8721=y
+CONFIG_PHY_AUTONEG=y
+CONFIG_PHY_SPEED100=n
+CONFIG_PHY_FDUPLEX=y
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+# BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+# used with many different loaders using the GNU objcopy program
+# Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+# different loaders using the GNU objcopy program. This option
+# should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=n
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+# that builds the application to link with NuttX. Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+# debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+# regions of memory to allocate from, this specifies the
+# number of memory regions that the memory manager must
+# handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+# time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+# or MSEC_PER_TICK=10. This setting may be defined to
+# inform NuttX that the processor hardware is providing
+# system timer interrupts at some interrupt interval other
+# than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+# this number of milliseconds; Round robin scheduling can
+# be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
+# scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+# task name to save in the TCB. Useful if scheduler
+# instrumentation is selected. Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+# Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+# You would only need this if you are concerned about accurate
+# time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+# would only need this if you are concerned about accurate
+# time conversion in the distand past. You must also define
+# CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+# provides /dev/console. Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+# driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+# errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+# inheritance on mutexes and semaphores.
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+# inheritance is enabled. It defines the maximum number of
+# different threads (minus one) that can take counts on a
+# semaphore with priority inheritance support. This may be
+# set to zero if priority inheritance is disabled OR if you
+# are only using semaphores as mutexes (only one holder) OR
+# if no more than two threads participate using a counting
+# semaphore.
+# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
+# then this setting is the maximum number of higher priority
+# threads (minus 1) than can be waiting for another thread
+# to release a count on a semaphore. This value may be set
+# to zero if no more than one thread is expected to wait for
+# a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+# by task_create() when a new task is started. If set, all
+# files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+# three file descriptors (stdin, stdout, stderr) by task_create()
+# when a new task is started. If set, all files/drivers will
+# appear to be closed in the new task except for stdin, stdout,
+# and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+# desciptors by task_create() when a new task is started. If
+# set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+# This format will support execution of NuttX binaries located
+# in a ROMFS filesystem (see examples/nxflat).
+# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
+# handle delayed processing from interrupt handlers. This feature
+# is required for some drivers but, if there are not complaints,
+# can be safely disabled. The worker thread also performs
+# garbage collection -- completing any delayed memory deallocations
+# from interrupt handlers. If the worker thread is disabled,
+# then that clean will be performed by the IDLE thread instead
+# (which runs at the lowest of priority and may not be appropriate
+# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
+# is enabled, then the following options can also be used:
+# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
+# thread. Default: 50
+# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
+# work in units of microseconds. Default: 50*1000 (50 MS).
+# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
+# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
+# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
+# the worker thread. Default: 4
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_MM_REGIONS=2
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=11
+CONFIG_START_DAY=10
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+CONFIG_SCHED_WORKQUEUE=n
+CONFIG_SCHED_WORKPRIORITY=50
+CONFIG_SCHED_WORKPERIOD=(50*1000)
+CONFIG_SCHED_WORKSTACKSIZE=1024
+CONFIG_SIG_SIGWORK=4
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS. If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+# waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+# up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+# little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+# active tasks. This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+# of parameters that a task may receive (i.e., maxmum value
+# of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+# specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+# descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+# can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+# structures. The system manages a pool of preallocated
+# message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+# a fixed payload size given by this settin (does not include
+# other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+# can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+# structures. The system manages a pool of preallocated
+# watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+# timer structures. The system manages a pool of preallocated
+# timer structures to minimize dynamic allocations. Set to
+# zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
+# file name support.
+# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
+# patents on FAT long file name technology. Please read the
+# disclaimer in the top-level COPYING file and only enable this
+# feature if you understand these issues.
+# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
+# default, maximum long file name is 255 bytes. This can eat up
+# a lot of memory (especially stack space). If you are willing
+# to live with some non-standard, short long file names, then
+# define this value. A good choice would be the same value as
+# selected for CONFIG_NAME_MAX which will limit the visibility
+# of longer file names anyway.
+# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
+# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
+# This must have one of the values of 0xff or 0x00.
+# Default: 0xff.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+# don't both with file chunks smaller than this number of data bytes.
+# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
+# Default: 255.
+# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
+# don't both with file chunks smaller than this number of data bytes.
+# Default: 32.
+# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
+# packing files together toward the end of the file or, if file are
+# deleted at the end of the file, clean up can simply mean erasing
+# the end of FLASH memory so that it can be re-used again. However,
+# doing this can also harm the life of the FLASH part because it can
+# mean that the tail end of the FLASH is re-used too often. This
+# threshold determines if/when it is worth erased the tail end of FLASH
+# and making it available for re-use (and possible over-wear).
+# Default: 8192.
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
+# option will enable a limited form of memory mapping that is
+# implemented by copying whole files into memory.
+#
+CONFIG_FS_FAT=n
+CONFIG_FAT_LCNAMES=n
+CONFIG_FAT_LFN=n
+CONFIG_FAT_MAXFNAME=32
+CONFIG_FS_NXFFS=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+# Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+# Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+# Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=1
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# Block driver buffering
+#
+# CONFIG_FS_READAHEAD
+# Enable read-ahead buffering
+# CONFIG_FS_WRITEBUFFER
+# Enable write buffering
+#
+CONFIG_FS_READAHEAD=n
+CONFIG_FS_WRITEBUFFER=n
+
+#
+# SDIO-based MMC/SD driver
+#
+# CONFIG_SDIO_DMA
+# SDIO driver supports DMA
+# CONFIG_MMCSD_MMCSUPPORT
+# Enable support for MMC cards
+# CONFIG_MMCSD_HAVECARDDETECT
+# SDIO driver card detection is 100% accurate
+#
+CONFIG_SDIO_DMA=n
+CONFIG_MMCSD_MMCSUPPORT=n
+CONFIG_MMCSD_HAVECARDDETECT=n
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+# accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# USB Device Configuration
+#
+# CONFIG_USBDEV
+# Enables USB device support
+# CONFIG_USBDEV_ISOCHRONOUS
+# Build in extra support for isochronous endpoints
+# CONFIG_USBDEV_DUALSPEED
+# Hardware handles high and full speed operation (USB 2.0)
+# CONFIG_USBDEV_SELFPOWERED
+# Will cause USB features to indicate that the device is
+# self-powered
+# CONFIG_USBDEV_MAXPOWER
+# Maximum power consumption in mA
+# CONFIG_USBDEV_TRACE
+# Enables USB tracing for debug
+# CONFIG_USBDEV_TRACE_NRECORDS
+# Number of trace entries to remember
+#
+CONFIG_USBDEV=n
+CONFIG_USBDEV_ISOCHRONOUS=n
+CONFIG_USBDEV_DUALSPEED=n
+CONFIG_USBDEV_SELFPOWERED=y
+CONFIG_USBDEV_REMOTEWAKEUP=n
+CONFIG_USBDEV_MAXPOWER=100
+CONFIG_USBDEV_TRACE=n
+CONFIG_USBDEV_TRACE_NRECORDS=128
+
+#
+# LPC17xx USB Configuration
+#
+# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
+# Handle USB Start-Of-Frame events.
+# Enable reading SOF from interrupt handler vs. simply reading on demand.
+# Probably a bad idea... Unless there is some issue with sampling the SOF
+# from hardware asynchronously.
+# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
+# Enable high priority interrupts. I have no idea why you might want to
+# do that
+# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
+# Number of DMA descriptors to allocate in SRAM.
+# CONFIG_LPC17_USBDEV_DMA
+# Enable lpc17xx-specific DMA support
+#
+CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
+CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
+CONFIG_LPC17_USBDEV_DMA=n
+CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
+CONFIG_LPC17_USBDEV_DMAINTMASK=0
+
+#
+# USB Serial Device Configuration
+#
+# CONFIG_PL2303
+# Enable compilation of the USB serial driver
+# CONFIG_PL2303_EPINTIN
+# The logical 7-bit address of a hardware endpoint that supports
+# interrupt IN operation
+# CONFIG_PL2303_EPBULKOUT
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk OUT operation
+# CONFIG_PL2303_EPBULKIN
+# The logical 7-bit address of a hardware endpoint that supports
+# bulk IN operation
+# # CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR
+# The vendor ID code/string
+# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR
+# The product ID code/string
+# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE
+# Size of the serial receive/transmit buffers
+#
+CONFIG_PL2303=n
+CONFIG_PL2303_EPINTIN=1
+CONFIG_PL2303_EPBULKOUT=2
+CONFIG_PL2303_EPBULKIN=5
+CONFIG_PL2303_NWRREQS=4
+CONFIG_PL2303_NRDREQS=4
+CONFIG_PL2303_VENDORID=0x067b
+CONFIG_PL2303_PRODUCTID=0x2303
+CONFIG_PL2303_VENDORSTR="Nuttx"
+CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
+CONFIG_PL2303_RXBUFSIZE=512
+CONFIG_PL2303_TXBUFSIZE=512
+
+#
+# USB Storage Device Configuration
+#
+# CONFIG_USBMSC
+# Enable compilation of the USB storage driver
+# CONFIG_USBMSC_EP0MAXPACKET
+# Max packet size for endpoint 0
+# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN
+# The logical 7-bit address of a hardware endpoints that support
+# bulk OUT and IN operations
+# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS
+# The number of write/read requests that can be in flight
+# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN
+# The size of the buffer in each write/read request. This
+# value needs to be at least as large as the endpoint
+# maxpacket and ideally as large as a block device sector.
+# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR
+# The vendor ID code/string
+# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR
+# The product ID code/string
+# CONFIG_USBMSC_REMOVABLE
+# Select if the media is removable
+#
+CONFIG_USBMSC=n
+CONFIG_USBMSC_EP0MAXPACKET=64
+CONFIG_USBMSC_EPBULKOUT=2
+CONFIG_USBMSC_EPBULKIN=5
+CONFIG_USBMSC_NRDREQS=2
+CONFIG_USBMSC_NWRREQS=2
+CONFIG_USBMSC_BULKINREQLEN=256
+CONFIG_USBMSC_BULKOUTREQLEN=256
+CONFIG_USBMSC_VENDORID=0x584e
+CONFIG_USBMSC_VENDORSTR="NuttX"
+CONFIG_USBMSC_PRODUCTID=0x5342
+CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
+CONFIG_USBMSC_VERSIONNO=0x0399
+CONFIG_USBMSC_REMOVABLE=y
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+#
+# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act
+# as either the client side or server side of the test
+# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the
+# client side simply receives messages forever, allowing
+# measurement of throughput
+# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has
+# no MAC address; one will be assigned
+# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address
+# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address
+# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask
+# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the
+# client side of the test (may be target or host)
+#
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=y
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10L<<24|0L<<16|0L<<8|2L)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10L<<24|0L<<16|0L<<8|1L)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255L<<24|255L<<16|255L<<8|0L)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10L<<24|0L<<16|0L<<8|1L)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for examples/buttons
+#
+# CONFIG_EXAMPLE_BUTTONS_MIN and CONFIG_EXAMPLE_BUTTONS_MAX
+# Lowest and highest button number (0-7)
+# CONFIG_EXAMPLE_IRQBUTTONS_MIN and CONFIG_EXAMPLE_IRQBUTTONS_MAX
+# Lowest and highest interrupting button number (-7)
+# CONFIG_EXAMPLE_BUTTONS_NAMEn - Name for button n
+#
+CONFIG_EXAMPLE_BUTTONS_MIN=0
+CONFIG_EXAMPLE_BUTTONS_MAX=7
+CONFIG_EXAMPLE_IRQBUTTONS_MIN=0
+CONFIG_EXAMPLE_IRQBUTTONS_MAX=7
+CONFIG_EXAMPLE_BUTTONS_NAME0="BUT1"
+CONFIG_EXAMPLE_BUTTONS_NAME1="BUT2"
+CONFIG_EXAMPLE_BUTTONS_NAME2="WAKE-UP"
+CONFIG_EXAMPLE_BUTTONS_NAME3="CENTER"
+CONFIG_EXAMPLE_BUTTONS_NAME4="UP"
+CONFIG_EXAMPLE_BUTTONS_NAME5="DOWN"
+CONFIG_EXAMPLE_BUTTONS_NAME6="LEFT"
+CONFIG_EXAMPLE_BUTTONS_NAME7="RIGHT"
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+# specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Settings for examples/usbserial
+#
+# CONFIG_EXAMPLES_USBSERIAL_INONLY
+# Only verify IN (device-to-host) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
+# Only verify OUT (host-to-device) data transfers. Default: both
+# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
+# Send only small, single packet messages. Default: Send large and small.
+# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
+# Send only large, multi-packet messages. Default: Send large and small.
+#
+CONFIG_EXAMPLES_USBSERIAL_INONLY=n
+CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
+CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
+
+CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
+
+#
+# Settings for examples/usbstorage
+#
+# CONFIG_EXAMPLES_USBMSC_NLUNS
+# Defines the number of logical units (LUNs) exported by the USB storage
+# driver. Each LUN corresponds to one exported block driver (or partition
+# of a block driver). May be 1, 2, or 3. Default is 1.
+# CONFIG_EXAMPLES_USBMSC_DEVMINOR1
+# The minor device number of the block driver for the first LUN. For
+# example, N in /dev/mmcsdN. Used for registering the block driver. Default
+# is zero.
+# CONFIG_EXAMPLES_USBMSC_DEVPATH1
+# The full path to the registered block driver. Default is "/dev/mmcsd0"
+# CONFIG_EXAMPLES_USBMSC_DEVMINOR2 and CONFIG_EXAMPLES_USBMSC_DEVPATH2
+# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS
+# is 2 or 3. No defaults.
+# CONFIG_EXAMPLES_USBMSC_DEVMINOR3 and CONFIG_EXAMPLES_USBMSC_DEVPATH3
+# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS
+# is 3. No defaults.
+#
+# If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
+# the example code will also manage the USB trace output. The amount of trace output
+# can be controlled using:
+#
+# CONFIG_EXAMPLES_USBMSC_TRACEINIT
+# Show initialization events
+# CONFIG_EXAMPLES_USBMSC_TRACECLASS
+# Show class driver events
+# CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS
+# Show data transfer events
+# CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER
+# Show controller events
+# CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS
+# Show interrupt-related events.
+#
+CONFIG_EXAMPLES_USBMSC_NLUNS=1
+CONFIG_EXAMPLES_USBMSC_DEVMINOR1=0
+CONFIG_EXAMPLES_USBMSC_DEVPATH1="/dev/mmcsd0"
+CONFIG_EXAMPLES_USBMSC_TRACEINIT=n
+CONFIG_EXAMPLES_USBMSC_TRACECLASS=n
+CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS=n
+CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER=n
+CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS=n
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+# operation from FLASH but must copy initialized .data sections to RAM.
+# (should also be =n for the LPC17xx which always runs from flash)
+# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
+# but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+# all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+# This is the thread that (1) performs the inital boot of the system up
+# to the point where user_start() is spawned, and (2) there after is the
+# IDLE thread that executes only when there is no other thread ready to
+# run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+# for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+#CONFIG_STACK_POINTER
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
diff --git a/nuttx/configs/lincoln60/ostest/setenv.sh b/nuttx/configs/lincoln60/ostest/setenv.sh
new file mode 100755
index 0000000000..19c43760fc
--- /dev/null
+++ b/nuttx/configs/lincoln60/ostest/setenv.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+# configs/lincoln60/ostest/setenv.sh
+#
+# Copyright (C) 2012 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+ echo "You must source this script, not run it!" 1>&2
+ exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+ echo "This script must be executed from the top-level NuttX build directory"
+ exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+ export PATH_ORIG="${PATH}"
+fi
+
+# TOOLCHAIN_BIN must be defined to the full path to the location where you
+# have installed the toolchain of your choice. Modify the following:
+
+export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Andd add the toolchain path to the PATH variable
+
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+echo "PATH : ${PATH}"
\ No newline at end of file
diff --git a/nuttx/configs/lincoln60/scripts/ld.script b/nuttx/configs/lincoln60/scripts/ld.script
new file mode 100644
index 0000000000..262e62df86
--- /dev/null
+++ b/nuttx/configs/lincoln60/scripts/ld.script
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * configs/lincoln60/scripts/ld.script
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LPC1769 has 512Kb of FLASH beginning at address 0x0000:0000 and
+ * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
+ * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
+ * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
+ * into the 32Kb CPU SRAM address range.
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ _eronly = ABSOLUTE(.); /* See below */
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } >sram
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } >sram
+ __exidx_end = ABSOLUTE(.);
+
+ .bss : {
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/lincoln60/src/Makefile b/nuttx/configs/lincoln60/src/Makefile
new file mode 100644
index 0000000000..1bc1f2fdf9
--- /dev/null
+++ b/nuttx/configs/lincoln60/src/Makefile
@@ -0,0 +1,96 @@
+############################################################################
+# configs/lincoln60/src/Makefile
+#
+# Copyright (C) 20102Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS += -I$(TOPDIR)/sched
+
+ASRCS =
+CSRCS = up_boot.c up_leds.c
+
+ifeq ($(CONFIG_NSH_ARCHINIT),y)
+CSRCS += up_nsh.c
+endif
+
+ifeq ($(CONFIG_USBMSC),y)
+CSRCS += up_usbmsc.c
+endif
+
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS += up_buttons.c
+endif
+
+AOBJS = $(ASRCS:.S=$(OBJEXT))
+COBJS = $(CSRCS:.c=$(OBJEXT))
+
+SRCS = $(ASRCS) $(CSRCS)
+OBJS = $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+ CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+ -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+ -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+ CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+ $(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+ $(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+ @( for obj in $(OBJS) ; do \
+ $(call ARCHIVE, $@, $${obj}); \
+ done ; )
+
+.depend: Makefile $(SRCS)
+ @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+ @touch $@
+
+depend: .depend
+
+clean:
+ @rm -f libboard$(LIBEXT) *~ .*.swp
+ $(call CLEAN)
+
+distclean: clean
+ @rm -f Make.dep .depend
+
+-include Make.dep
diff --git a/nuttx/configs/lincoln60/src/lincoln60_internal.h b/nuttx/configs/lincoln60/src/lincoln60_internal.h
new file mode 100644
index 0000000000..022522e392
--- /dev/null
+++ b/nuttx/configs/lincoln60/src/lincoln60_internal.h
@@ -0,0 +1,105 @@
+/****************************************************************************
+ * configs/lincoln60/src/lincoln60_internal.h
+ * arch/arm/src/board/lincoln60_internal.n
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef _CONFIGS_LINCOLN60_SRC_LINCOLN60_INTERNAL_H
+#define _CONFIGS_LINCOLN60_SRC_LINCOLN60_INTERNAL_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+#include
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * LEDs GPIO PIN SIGNAL NAME
+ * -------------------------------- ---- --------------
+ * P1[18] 32 LED1
+ * P3[26] 26 LED2
+ ****************************************************************************/
+
+#define LINCOLN60_LED1 (GPIO_OUTPUT | GPIO_PORT1 | GPIO_PIN18)
+#define LINCOLN60_LED1_OFF LINCOLN60_LED1
+#define LINCOLN60_LED1_ON (LINCOLN60_LED1 | GPIO_VALUE_ONE)
+#define LINCOLN60_LED2 (GPIO_OUTPUT | GPIO_PORT3 | GPIO_PIN26)
+#define LINCOLN60_LED2_OFF LINCOLN60_LED2
+#define LINCOLN60_LED2_ON (LINCOLN60_LED2 | GPIO_VALUE_ONE)
+
+#define LINCOLN60_HEARTBEAT LINCOLN60_LED2
+
+/****************************************************************************
+ * Buttons GPIO PIN SIGNAL NAME
+ * -------------------------------- ---- --------------
+ * P2[10] 53 BTN1
+ ****************************************************************************/
+
+#define LINCOLN60_BUT1 (GPIO_INTBOTH | GPIO_FLOAT | GPIO_PORT2 | GPIO_PIN10)
+
+/* Button IRQ numbers */
+
+#define LINCOLN60_BUT1_IRQ LPC17_IRQ_P0p23
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public data
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: lpc17_sspinitialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the Lincoln 60 board.
+ *
+ ****************************************************************************/
+
+extern void weak_function lpc17_sspinitialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _CONFIGS_LINCOLN60_SRC_LINCOLN60_INTERNAL_H */
+
diff --git a/nuttx/configs/lincoln60/src/up_boot.c b/nuttx/configs/lincoln60/src/up_boot.c
new file mode 100644
index 0000000000..42b01a3ea3
--- /dev/null
+++ b/nuttx/configs/lincoln60/src/up_boot.c
@@ -0,0 +1,82 @@
+/************************************************************************************
+ * configs/lincoln60/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+
+#include
+
+#include
+
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "lpc17_internal.h"
+#include "lincoln60_internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lpc17_boardinitialize
+ *
+ * Description:
+ * All LPC17xx architectures must provide the following entry point. This entry point
+ * is called early in the intitialization -- after all memory has been configured
+ * and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void lpc17_boardinitialize(void)
+{
+ /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+ up_ledinit();
+#endif
+}
diff --git a/nuttx/configs/lincoln60/src/up_buttons.c b/nuttx/configs/lincoln60/src/up_buttons.c
new file mode 100644
index 0000000000..55781846d5
--- /dev/null
+++ b/nuttx/configs/lincoln60/src/up_buttons.c
@@ -0,0 +1,225 @@
+/****************************************************************************
+ * configs/lincoln60/src/up_buttons.c
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+
+#include
+#include
+
+#include
+
+#include "lpc17_internal.h"
+#include "lincoln60_internal.h"
+
+#ifdef CONFIG_ARCH_BUTTONS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+/* Pin configuration for each STM3210E-EVAL button. This array is indexed by
+ * the BUTTON_* and JOYSTICK_* definitions in board.h
+ */
+
+static const uint16_t g_buttoncfg[BOARD_NUM_BUTTONS] =
+{
+ LINCOLN60_BUT1
+};
+
+/* This array defines all of the interupt handlers current attached to
+ * button events.
+ */
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
+static xcpt_t g_buttonisr[BOARD_NUM_BUTTONS];
+
+/* This array provides the mapping from button ID numbers to button IRQ
+ * numbers.
+ */
+
+static uint8_t g_buttonirq[BOARD_NUM_BUTTONS] =
+{
+ LINCOLN60_BUT1_IRQ
+};
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_buttoninit
+ *
+ * Description:
+ * up_buttoninit() must be called to initialize button resources. After
+ * that, up_buttons() may be called to collect the current state of all
+ * buttons or up_irqbutton() may be called to register button interrupt
+ * handlers.
+ *
+ ****************************************************************************/
+
+void up_buttoninit(void)
+{
+ int i;
+
+ /* Configure the GPIO pins as interrupting inputs. */
+
+ for (i = 0; i < BOARD_NUM_BUTTONS; i++)
+ {
+ lpc17_configgpio(g_buttoncfg[i]);
+ }
+}
+
+/****************************************************************************
+ * Name: up_buttons
+ *
+ * Description:
+ * up_buttoninit() must be called to initialize button resources. After
+ * that, up_buttons() may be called to collect the current state of all
+ * buttons.
+ *
+ * up_buttons() may be called at any time to harvest the state of every
+ * button. The state of the buttons is returned as a bitset with one
+ * bit corresponding to each button: If the bit is set, then the button
+ * is pressed. See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT
+ * definitions in board.h for the meaning of each bit.
+ *
+ ****************************************************************************/
+
+uint8_t up_buttons(void)
+{
+ uint8_t ret = 0;
+ int i;
+
+ /* Check that state of each key */
+
+ for (i = 0; i < BOARD_NUM_BUTTONS; i++)
+ {
+ /* A LOW value means that the key is pressed. */
+
+ bool released = lpc17_gpioread(g_buttoncfg[i]);
+
+ /* Accumulate the set of depressed (not released) keys */
+
+ if (!released)
+ {
+ ret |= (1 << i);
+ }
+ }
+
+ return ret;
+}
+
+/****************************************************************************
+ * Button support.
+ *
+ * Description:
+ * up_buttoninit() must be called to initialize button resources. After
+ * that, up_irqbutton() may be called to register button interrupt handlers.
+ *
+ * up_irqbutton() may be called to register an interrupt handler that will
+ * be called when a button is depressed or released. The ID value is a
+ * button enumeration value that uniquely identifies a button resource. See the
+ * BOARD_BUTTON_* and BOARD_JOYSTICK_* definitions in board.h for the meaning
+ * of enumeration values. The previous interrupt handler address is returned
+ * (so that it may restored, if so desired).
+ *
+ * Note that up_irqbutton() also enables button interrupts. Button
+ * interrupts will remain enabled after the interrupt handler is attached.
+ * Interrupts may be disabled (and detached) by calling up_irqbutton with
+ * irqhandler equal to NULL.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
+xcpt_t up_irqbutton(int id, xcpt_t irqhandler)
+{
+ xcpt_t oldhandler = NULL;
+ irqstate_t flags;
+ int irq;
+
+ /* Verify that the button ID is within range */
+
+ if ((unsigned)id < BOARD_NUM_BUTTONS)
+ {
+ /* Return the current button handler and set the new interrupt handler */
+
+ oldhandler = g_buttonisr[id];
+ g_buttonisr[id] = irqhandler;
+
+ /* Disable interrupts until we are done */
+
+ flags = irqsave();
+
+ /* Configure the interrupt. Either attach and enable the new
+ * interrupt or disable and detach the old interrupt handler.
+ */
+
+ irq = g_buttonirq[id];
+ if (irqhandler)
+ {
+ /* Attach then enable the new interrupt handler */
+
+ (void)irq_attach(irq, irqhandler);
+ up_enable_irq(irq);
+ }
+ else
+ {
+ /* Disable then then detach the the old interrupt handler */
+
+ up_disable_irq(irq);
+ (void)irq_detach(irq);
+ }
+ irqrestore(flags);
+ }
+ return oldhandler;
+}
+#endif
+
+#endif /* CONFIG_ARCH_BUTTONS */
diff --git a/nuttx/configs/lincoln60/src/up_leds.c b/nuttx/configs/lincoln60/src/up_leds.c
new file mode 100644
index 0000000000..fe00895b16
--- /dev/null
+++ b/nuttx/configs/lincoln60/src/up_leds.c
@@ -0,0 +1,219 @@
+/****************************************************************************
+ * configs/lincoln60/src/up_leds.c
+ * arch/arm/src/board/up_leds.c
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+
+#include "lpc17_internal.h"
+
+#include "lincoln60_internal.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG with
+ * CONFIG_DEBUG_VERBOSE too)
+ */
+
+#undef LED_DEBUG /* Define to enable debug */
+#undef LED_VERBOSE /* Define to enable verbose debug */
+
+#ifdef LED_DEBUG
+# define leddbg lldbg
+# ifdef LED_VERBOSE
+# define ledvdbg lldbg
+# else
+# define ledvdbg(x...)
+# endif
+#else
+# undef LED_VERBOSE
+# define leddbg(x...)
+# define ledvdbg(x...)
+#endif
+
+/* Dump GPIO registers */
+
+#ifdef LED_VERBOSE
+# define led_dumpgpio(m) lpc17_dumpgpio(LINCOLN60_LED2, m)
+#else
+# define led_dumpgpio(m)
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/* LED definitions ******************************************************************
+
+The Lincoln 60 has 2 LEDs along the bottom of the board. Green or off.
+If CONFIG_ARCH_LEDS is defined, the LEDs will be controlled as follows for NuttX
+debug functionality (where NC means "No Change").
+
+During the boot phases. LED1 and LED2 will show boot status.
+
+ LED1 LED2
+STARTED OFF OFF
+HEAPALLOCATE BLUE OFF
+IRQSENABLED OFF BLUE
+STACKCREATED OFF OFF
+
+After the system is booted, this logic will no longer use LEDs 1 & 2. They
+are available for use by applications using lpc17_led (prototyped below)
+*/
+
+static bool g_initialized;
+static int g_nestcount;
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_ledinit
+ ****************************************************************************/
+
+void up_ledinit(void)
+{
+ /* Configure all LED GPIO lines */
+
+ led_dumpgpio("up_ledinit() Entry)");
+
+ lpc17_configgpio(LINCOLN60_LED1);
+ lpc17_configgpio(LINCOLN60_LED2);
+
+ led_dumpgpio("up_ledinit() Exit");
+}
+
+/****************************************************************************
+ * Name: up_ledon
+ ****************************************************************************/
+
+void up_ledon(int led)
+{
+ /* We will control LED1 and LED2 not yet completed the boot sequence. */
+
+ if (!g_initialized)
+ {
+ int led1 = 0;
+ int led2 = 0;
+ switch (led)
+ {
+ case LED_STACKCREATED:
+ g_initialized = true;
+ case LED_STARTED:
+ default:
+ break;
+
+ case LED_HEAPALLOCATE:
+ led1 = 1;
+ break;
+
+ case LED_IRQSENABLED:
+ led2 = 1;
+ }
+ lpc17_led(LINCOLN60_LED1,led1);
+ lpc17_led(LINCOLN60_LED2,led2);
+ }
+
+ /* We will always control the HB LED */
+
+ switch (led)
+ {
+ case LED_INIRQ:
+ case LED_SIGNAL:
+ case LED_ASSERTION:
+ case LED_PANIC:
+ lpc17_gpiowrite(LINCOLN60_HEARTBEAT, false);
+ g_nestcount++;
+
+ default:
+ break;
+ }
+}
+
+/****************************************************************************
+ * Name: up_ledoff
+ ****************************************************************************/
+
+void up_ledoff(int led)
+{
+ /* In all states, OFF can only mean turning off the HB LED */
+
+ if (g_nestcount <= 1)
+ {
+ lpc17_led(LINCOLN60_HEARTBEAT, true);
+ g_nestcount = 0;
+ }
+ else
+ {
+ g_nestcount--;
+ }
+}
+
+/************************************************************************************
+ * Name: lpc17_led
+ *
+ * Description:
+ * Once the system has booted, these functions can be used to control the LEDs
+ *
+ ************************************************************************************/
+
+void lpc17_led(int lednum, int state)
+
+{
+ lpc17_gpiowrite(lednum, state);
+}
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/nuttx/configs/lincoln60/src/up_nsh.c b/nuttx/configs/lincoln60/src/up_nsh.c
new file mode 100644
index 0000000000..2c829837a6
--- /dev/null
+++ b/nuttx/configs/lincoln60/src/up_nsh.c
@@ -0,0 +1,86 @@
+/****************************************************************************
+ * config/lincoln60/src/up_nsh.c
+ * arch/arm/src/board/up_nsh.c
+ *
+ * Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+# ifdef CONFIG_DEBUG
+# define message(...) lib_lowprintf(__VA_ARGS__)
+# else
+# define message(...) printf(__VA_ARGS__)
+# endif
+#else
+# ifdef CONFIG_DEBUG
+# define message lib_lowprintf
+# else
+# define message printf
+# endif
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ * Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int nsh_archinitialize(void)
+{
+ return OK;
+}