fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-18 04:13:34 +08:00
Code Issues Packages Projects Releases Wiki Activity

Remove absolute pressure field as its not useful and confusing anywary

Browse Source
This commit is contained in:
Lorenz Meier
2014-08-24 11:49:45 +02:00
parent e09bc02c37
commit 127948f32f
4 changed files with 18 additions and 39 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/drivers/ets_airspeed/ets_airspeed.cpp
+6 -14
View File
@@ -155,7 +155,6 @@ ETSAirspeed::collect()
}
uint16_t diff_pres_pa_raw = val[1] << 8 | val[0];
uint16_t diff_pres_pa;
if (diff_pres_pa_raw == 0) {
// a zero value means the pressure sensor cannot give us a
// value. We need to return, and not report a value or the
@@ -166,28 +165,21 @@ ETSAirspeed::collect()
return -1;
}
if (diff_pres_pa_raw < _diff_pres_offset + MIN_ACCURATE_DIFF_PRES_PA) {
diff_pres_pa = 0;
} else {
diff_pres_pa = diff_pres_pa_raw - _diff_pres_offset;
}
// The raw value still should be compensated for the known offset
diff_pres_pa_raw -= _diff_pres_offset;
// Track maximum differential pressure measured (so we can work out top speed).
if (diff_pres_pa > _max_differential_pressure_pa) {
_max_differential_pressure_pa = diff_pres_pa;
if (diff_pres_pa_raw > _max_differential_pressure_pa) {
_max_differential_pressure_pa = diff_pres_pa_raw;
}
differential_pressure_s report;
report.timestamp = hrt_absolute_time();
report.error_count = perf_event_count(_comms_errors);
report.differential_pressure_pa = (float)diff_pres_pa;
// XXX we may want to smooth out the readings to remove noise.
report.differential_pressure_filtered_pa = (float)diff_pres_pa;
report.differential_pressure_raw_pa = (float)diff_pres_pa_raw;
report.differential_pressure_filtered_pa = diff_pres_pa_raw;
report.differential_pressure_raw_pa = diff_pres_pa_raw;
report.temperature = -1000.0f;
report.max_differential_pressure_pa = _max_differential_pressure_pa;
@@ -369,7 +361,7 @@ test()
err(1, "immediate read failed");
warnx("single read");
warnx("diff pressure: %f pa", (double)report.differential_pressure_pa);
warnx("diff pressure: %f pa", (double)report.differential_pressure_filtered_pa);
/* start the sensor polling at 2Hz */
if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2))
@@ -394,7 +386,7 @@ test()
err(1, "periodic read failed");
warnx("periodic read %u", i);
warnx("diff pressure: %f pa", (double)report.differential_pressure_pa);
warnx("diff pressure: %f pa", (double)report.differential_pressure_filtered_pa);
}
/* reset the sensor polling to its default rate */
src/drivers/meas_airspeed/meas_airspeed.cpp
+5 -17
View File
@@ -228,18 +228,7 @@ MEASAirspeed::collect()
// the raw value still should be compensated for the known offset
diff_press_pa_raw -= _diff_pres_offset;
/* don't take the absolute value because the calibration takes this into account and warns the user if the
* tubes are connected backwards */
float diff_press_pa = diff_press_pa_raw;
/*
note that we return both the absolute value with offset
applied and a raw value without the offset applied. This
makes it possible for higher level code to detect if the
user has the tubes connected backwards, and also makes it
possible to correctly use offsets calculated by a higher
level airspeed driver.
With the above calculation the MS4525 sensor will produce a
positive number when the top port is used as a dynamic port
and bottom port is used as the static port
@@ -248,15 +237,14 @@ MEASAirspeed::collect()
struct differential_pressure_s report;
/* track maximum differential pressure measured (so we can work out top speed). */
if (diff_press_pa > _max_differential_pressure_pa) {
_max_differential_pressure_pa = diff_press_pa;
if (diff_press_pa_raw > _max_differential_pressure_pa) {
_max_differential_pressure_pa = diff_press_pa_raw;
}
report.timestamp = hrt_absolute_time();
report.error_count = perf_event_count(_comms_errors);
report.temperature = temperature;
report.differential_pressure_pa = diff_press_pa;
report.differential_pressure_filtered_pa = _filter.apply(diff_press_pa);
report.differential_pressure_filtered_pa = _filter.apply(diff_press_pa_raw);
report.differential_pressure_raw_pa = diff_press_pa_raw;
report.max_differential_pressure_pa = _max_differential_pressure_pa;
@@ -514,7 +502,7 @@ test()
}
warnx("single read");
warnx("diff pressure: %d pa", (int)report.differential_pressure_pa);
warnx("diff pressure: %d pa", (int)report.differential_pressure_filtered_pa);
/* start the sensor polling at 2Hz */
if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2)) {
@@ -542,7 +530,7 @@ test()
}
warnx("periodic read %u", i);
warnx("diff pressure: %d pa", (int)report.differential_pressure_pa);
warnx("diff pressure: %d pa", (int)report.differential_pressure_filtered_pa);
warnx("temperature: %d C (0x%02x)", (int)report.temperature, (unsigned) report.temperature);
}