From 0d395e893a78b181265d11fe9494703730d7c2b9 Mon Sep 17 00:00:00 2001
From: Lorenz Meier <lm@inf.ethz.ch>
Date: Mon, 19 Oct 2015 13:24:03 +0200
Subject: [PATCH] Aerocore: Fix formatting

---
 src/drivers/boards/aerocore/aerocore_init.c | 12 +++++++++---
 src/drivers/boards/aerocore/aerocore_led.c  | 14 ++++++++++----
 src/drivers/boards/aerocore/aerocore_spi.c  |  4 ++--
 3 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/src/drivers/boards/aerocore/aerocore_init.c b/src/drivers/boards/aerocore/aerocore_init.c
index 3bdb0d4238..83bc2f4234 100644
--- a/src/drivers/boards/aerocore/aerocore_init.c
+++ b/src/drivers/boards/aerocore/aerocore_init.c
@@ -117,12 +117,12 @@ __END_DECLS
 
 static GRAN_HANDLE dma_allocator;
 
-/* 
- * The DMA heap size constrains the total number of things that can be 
+/*
+ * The DMA heap size constrains the total number of things that can be
  * ready to do DMA at a time.
  *
  * For example, FAT DMA depends on one sector-sized buffer per filesystem plus
- * one sector-sized buffer per file. 
+ * one sector-sized buffer per file.
  *
  * We use a fundamental alignment / granule size of 64B; this is sufficient
  * to guarantee alignment for the largest STM32 DMA burst (16 beats x 32bits).
@@ -137,8 +137,10 @@ dma_alloc_init(void)
 					sizeof(g_dma_heap),
 					7,  /* 128B granule - must be > alignment (XXX bug?) */
 					6); /* 64B alignment */
+
 	if (dma_allocator == NULL) {
 		message("[boot] DMA allocator setup FAILED");
+
 	} else {
 		g_dma_perf = perf_alloc(PC_COUNT, "DMA allocations");
 	}
@@ -262,11 +264,13 @@ __EXPORT int nsh_archinitialize(void)
 
 	/* Configure Sensors on SPI bus #3 */
 	spi3 = up_spiinitialize(3);
+
 	if (!spi3) {
 		message("[boot] FAILED to initialize SPI port 3\n");
 		up_ledon(LED_AMBER);
 		return -ENODEV;
 	}
+
 	/* Default: 1MHz, 8 bits, Mode 3 */
 	SPI_SETFREQUENCY(spi3, 10000000);
 	SPI_SETBITS(spi3, 8);
@@ -279,11 +283,13 @@ __EXPORT int nsh_archinitialize(void)
 
 	/* Configure FRAM on SPI bus #4 */
 	spi4 = up_spiinitialize(4);
+
 	if (!spi4) {
 		message("[boot] FAILED to initialize SPI port 4\n");
 		up_ledon(LED_AMBER);
 		return -ENODEV;
 	}
+
 	/* Default: ~10MHz, 8 bits, Mode 3 */
 	SPI_SETFREQUENCY(spi4, 10 * 1000 * 1000);
 	SPI_SETBITS(spi4, 8);
diff --git a/src/drivers/boards/aerocore/aerocore_led.c b/src/drivers/boards/aerocore/aerocore_led.c
index 22b3a2c240..89c6367419 100644
--- a/src/drivers/boards/aerocore/aerocore_led.c
+++ b/src/drivers/boards/aerocore/aerocore_led.c
@@ -103,17 +103,23 @@ __EXPORT void led_toggle(int led)
 {
 	switch (led) {
 	case 0:
-		if (stm32_gpioread(GPIO_LED0))
+		if (stm32_gpioread(GPIO_LED0)) {
 			stm32_gpiowrite(GPIO_LED0, false);
-		else
+
+		} else {
 			stm32_gpiowrite(GPIO_LED0, true);
+		}
+
 		break;
 
 	case 1:
-		if (stm32_gpioread(GPIO_LED1))
+		if (stm32_gpioread(GPIO_LED1)) {
 			stm32_gpiowrite(GPIO_LED1, false);
-		else
+
+		} else {
 			stm32_gpiowrite(GPIO_LED1, true);
+		}
+
 		break;
 
 	default:
diff --git a/src/drivers/boards/aerocore/aerocore_spi.c b/src/drivers/boards/aerocore/aerocore_spi.c
index 1ce3f35f88..28103c843e 100644
--- a/src/drivers/boards/aerocore/aerocore_spi.c
+++ b/src/drivers/boards/aerocore/aerocore_spi.c
@@ -136,8 +136,8 @@ __EXPORT void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
 
 	switch (devid) {
 	case PX4_SPIDEV_GYRO:
-			/* Making sure the other peripherals are not selected */
-			stm32_gpiowrite(GPIO_SPI_CS_GYRO, !selected);
+		/* Making sure the other peripherals are not selected */
+		stm32_gpiowrite(GPIO_SPI_CS_GYRO, !selected);
 		stm32_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1);
 		stm32_gpiowrite(GPIO_SPI_CS_BARO, 1);
 		break;